The Lancom 730-4G is a versatile device that offers a wide range of features for reliable and efficient internet connectivity. With its integrated 4G LTE modem, it provides fast and stable cellular data access, making it an ideal solution for remote locations or as a backup internet connection. The device also features two Ethernet ports, enabling you to connect wired devices such as computers or IP cameras. Additionally, the Lancom 730-4G supports Power over Ethernet (PoE), allowing you to power compatible devices without the need for additional power cables.
The Lancom 730-4G is a versatile device that offers a wide range of features for reliable and efficient internet connectivity. With its integrated 4G LTE modem, it provides fast and stable cellular data access, making it an ideal solution for remote locations or as a backup internet connection. The device also features two Ethernet ports, enabling you to connect wired devices such as computers or IP cameras. Additionally, the Lancom 730-4G supports Power over Ethernet (PoE), allowing you to power compatible devices without the need for additional power cables.
Hardware
Interfaces
Data transmission in cellular networks
Package content
LANCOM 730-4G+
4G
Signal
Power
ETH 1
DC 12 V
4G Ant 2
Config (Com) Reset
LAN
ETH 1 PoE SIM
4G Ant 1
➂ ➃➁ ➄ ➅➀ ➀
LANCOM 730-4G+
Hardware Quick Reference
Cloud-ready
➀LTE / 4G antennas
Connect the two supplied cellular antennas to the
connectors 4G Ant 1 and Ant 2.
➁Power
After connecting the cable to the device, turn the bayonet
connector 90° clockwise until it clicks into place.
Use only the supplied power adapter.
➂Configuration interface
Configuring the device via the serial interface requires a
serial configuration cable (available as an accessory).
➃Reset button
Pressed up to 5 seconds: device restart
Pressed until first flashing up of all LEDs:
configuration reset and device restart
RESET
➄Ethernet interface
Use the cable with the kiwi-colored connectors to
connect the interface ETH1 to your PC or a LAN
switch.
➅SIM card slot
Slide the SIM card into the slot using the marker to
ensure that the card is the right way round.
Ensure that the SIM card clicks into place on insertion.
To remove the card from the device again, press the
card lightly into the device. Let go to release the SIM
card from the slot.
iPlease observe the following when setting up the device
Before initial startup, please make sure to take notice of the information regarding the
intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket
that is freely accessible at all times.
Antennas may only be attached or replaced when the device is switched off. Mounting or
dismounting while the device is switched on may destroy the 4G module!
The SIM card may only be inserted or removed when the device is switched off.
Inserting or removing while the device is switched on may destroy the 4G module!
➀ Power
➁ 4G
➂ Signal
➃ ETH 1
➀ ➂➁ ➃
Mounting & connecting
LED description & technical details
-
1
Lancom 730-4G User guide
- Type
- User guide
- This manual is also suitable for
The Lancom 730-4G is a versatile device that offers a wide range of features for reliable and efficient internet connectivity. With its integrated 4G LTE modem, it provides fast and stable cellular data access, making it an ideal solution for remote locations or as a backup internet connection. The device also features two Ethernet ports, enabling you to connect wired devices such as computers or IP cameras. Additionally, the Lancom 730-4G supports Power over Ethernet (PoE), allowing you to power compatible devices without the need for additional power cables.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lancom 730-4G+ Reference guide
-
Lancom 1800EF-5G User guide
-
Lancom 1800VAW-4G Reference guide
-
-
Lancom LX-6500 Installation guide
-
Lancom LX-6500E Installation guide
-
-
-
-
Other documents
-
Lancom Systems 1780EW-4G User guide
-
-
-
Lancom Systems 1926VAG-5G User guide
-
-
-
-
-
-