Dahua M Series Monocular Upgrade Camera User guide

M Series Monocular Upgrade Camera
Dahua
Brand
Dahua
Model
M Series Monocular Upgrade Camera
Type
User guide
M series Monocular Upgrade Operation Guide
1. Insert the SD card into the SD card slot of the monocular.
2. Turn on the monocular. The SD card icon will be displayed in the upper right corner
of the screen. Press the menu button to enter the menu interface and select USB
Mode as Mass.
3. Connect monocular with your computer via Micro USB cable. Copy the upgrade
firmware into the SD card. After the copy is completed, unplug the data cable.
※Note: Make sure the firmware corresponds correctly. M20, M40, and M60
firmwares are incompatible with each other.
4. Copy ThermalCore. img and update_sd.img file into root directory of the SD card.
5. Turn off the monocular.
6. Press and hold on the zoom button, then press the power button and hold on for 3
seconds to enter the upgrade mode. Observe through the eyepiece, and you can
release the zoom button when the screen turns blue. The device starts to upgrade.
7. It takes about 2-3 minutes for the device to automatically upgrade, and then the
monocular will restart and enter the preview screen. At this point the upgrade is
complete.
1
2
8. After the upgrade is completed, the device will reboot automatically. Connect the
mobile phone APP to camera. System - > version. Check the Firmware and Core
version to confirm the upgrade is successful.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Dahua M Series Monocular Upgrade Camera User guide

M Series Monocular Upgrade Camera
Dahua
Brand
Dahua
Model
M Series Monocular Upgrade Camera
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents