2. Terma
  3. 2688679
2688679

Terma 2688679 Installation guide

  • Hello! I have reviewed the installation guide for the TERMA Alex 1580x500mm radiator. This document provides detailed instructions on installing the radiator, including the required parts and measurements. It also explains that standard 1/2" radiator valves are required, and the radiator should be fitted at least 100 mm from the floor. I'm ready to answer any questions you might have about the installation process.
  • What type of heating system is this radiator designed for?
    What is the minimum distance the radiator should be fitted from the floor?
    What size valves are required for this radiator?
Installaon guide Alex 1580x500mm - SX
Please read the instrucons in full before starng to fit your radiator.
• Please check that all parts listed are present before starng installa-
on.
• Valves are not provided, please make sure that you have them
before you start. This product requires standard 1/2" radiator valves.
• Before drilling holes for the brackets please check that there are no
hidden wires or pipes.
• The plugs supplied are for hard walls masonry only. Please make
sure you are using the correct plug for your wall.
• Terma radiators are designed for closed heang systems.
• The radiator should be fied at least 100 mm from the floor to
maximise heat efficiency.
• Nong the distances between bracket centres, mark out the
posion of the brackets on the wall.
• Drill holes to approximately 80 mm depth using a 10 mm drill bit
and insert rawl plugs (1). Using connecng screw with a washer (2)
aach mounng bracket-1 (3).
• Using bracket to collector fixing screw (5) aach mounng
bracket-2 (6) to radiator.
• Guide all mounng brackets-2 (6) into mounng brackets-1 (3) and
fix with connecng screws (4)
• Connect the water flow using appropriate 1/2" BSP valves. Follow
valves manufacture guidelines for correct installaion.
• Fill the radiator and purge any trapped air via the bleed valve at the
top of the radiator.
• Wipe your radiator down using a clean damp cloth.
Never use scourers or abrasives.
For all installaon and warranty enquiries please
contact Crimson Bear Customer Support on
01535 636256
Refers to water and dual fuel version
22
30
30
SX
57
÷ 65
470
1580
500
901400
132 ÷ 140 470
G1/2"G1/2"
Fixing kit content
rawl plug
wall fixing
screw +
washer
mounng
bracket-1
bracket
connecng
screw
bracket to
collector
fixing screw
mounng
bracket-2
air vent
allen key
(1)
(2)
(3)
(4)
(5)
(6)
Mounng bracket TERMA MK, P/S, 42÷50 mm, 4x
10x80
7
gigieltom20170810 *Refers to water and dual fuel version only
E
F
D
B
A
4x
21 3 4
6
5
4x
8*
4x
42 ÷ 50
4x
1x
14
22
4
a* b* c* d*
#8 4
4x
9*
4x
PZ3
/