WI-PS301G-UPS
Solar Controller Installation Guide
www.wireless-tek.com
Username
Address
Telephone No.
Purchase Shop
Purchase Address
Product Model No.
Purchase Time
Serial No.
Dealer Signature
If the product defects within three months after purchase, we will provide you a new
product of the same model.
If the product defects within the three-year warranty period, we will provide the
professional maintenance service.
Proof of purchase and a complete product serial number are required to receive any
services guaranteed as part of the limited warranty.
Any other defects that are not caused by workmanship or product quality, such as
natural disaster, water damage, extreme thermal or environmental conditions. sticker
damaged, warranty card losing will disqualify the product from limited warranty.
1. Package Contents 3. Product Specifications Warranty Card
1 × Solar Controller
Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao'an street,
Baoan District,Shenzhen City, Guangdong, China
Website:www.wireless-tek.com
Tel:86-0755-32811290
Email:sales@wireless-tek.com
Technical Support:tech@wireless-tek.com
Company Website
Cloud Management
Technical Support
RoHS
SUN
BIN
100%
75%
50%
25%
BT
BOUT
8A
6A
4A
2A
Batt ery Char ge
Status Charge
PW
24V
VI
LB
BM
ON DI P
1 2 3 4 5
Smar t Solar Cont rolle r
VO-
VO+
VO-
VO+
1× Quick Installation Guide
WI-PS301G-UPS
Sola r Controll er Inst allat ion Gui de
www.wireless-tek.com
1× Mounting Accessory Kit
2. Hardware Introduction
·2.1 Front Panel
SUN
BIN
100%
75%
50%
25%
BT
BOUT
8A
6A
4A
2A
LED Indicators
Bat tery Ch arge
Sta tus C har ge
PW
24V
VI
LB
BM
ON DIP
1 2 3 4 5
VO-
VO+
VO-
VO+
Smart S ol ar Cont ro ll er
DIP Switch
12V/24V DC Output Terminal
·2.2 Top Side Panel
S+ S- S- S+
Solar Power Terminal
B+ B-
TMP
·2.3 Bottom Side Panel
Battery Input Terminal
Temperature Sensor Terminal
(Not included)
Note
VO+: DC output positive electrode
VO-: DC output negative electrode
BT+: Battery positive electrode
BT-: Battery negative electrode
S+: Solar power positive electrode
S-: Solar power negative electrode
LED Indicators
SUN:
Solar power
Solid on
Off
The solar power on is normal
The solar power is off or failed
BIN:
Battery charge
Solid on
Off
The battery is charging
No battery is charging or battery is failed
BOUT:
Battery discharge
Solid on
Off
The battery is discharging
No battery is discharging or battery is failed
BT:
Battery Status
Solid on
Blink
Battery is connected
Battery is disconnected or failed
Solid on Display battery current capacity
25%/50%/75%/100%
On Display battery charging current
2A/4A/6A/8A
4. DIP Switch
DIP Switch
PW:
Power
To the left
To the right
Turn on the solar solar controller
Turn off the solar power
24V
To the left
To the right
The VO terminals with 24V max 3A output
The VO terminals with 12V max 5A output
VI
Option DC input
Option solar power input
LB:
Lithum battery
To the left
To the right
14.8V 100Ah lithum battery, max charge current 8A
12.6V 100Ah lithum battery, max charge current 8A
BM
To the left
To the right
Choose the 12V 100Ah lithum battery input, max charge current 8A
Choose the 12V 100Ah lead-acid battery, max charge current 8A
Note: Support 12V (18-32v) solar plate, maximum power input 200W
Step 1: Adjust the DIP switch (e.g. 12.6V lithum battery, 24V DC output)
SUN
BIN
100 %
75%
50%
25%
BT
BOU T
8A
6A
4A
2A
Bat tery Ch arge
Sta tus Ch arge
PW
24V
VI
LB
BM
ON DI P
1 2 3 4 5
VO-
VO+
VO-
VO+
Sma rt Sola r Contr oller
Battery
Solar Pan el s
Solar P an el s
12V(1 8V ~3 2V )
24V DC ou tp ut m ax 3 A
WI-PM S3 10 GF -UPS- I
12.6V l it hi um b atter y
24V CPE
IP Ca me ra
1 x battery input terminal
2 x DC output terminals
1 x temperature sensor terminal
8A
Max Charge Current
12-24V 400W input (Open Circuit Voltage 18V~32V)
Solar Type
12V lead-acid battery
Battery type
12.6V/14.8V lithium battery
12V Max 5A（Optional）
Power Output
24V Max 3A（Optional）
Products
Product Terminals
2 x solar input terminals
WI-PS301-UPS
Before installation, ensure that the device is powered off Option the 12V/24V DC output via
DIP switch manually. Solar energy must be combined with battery use to start the device
Step 2: Hook up the 12V solar panel to S terminals, positive to positive, negative to negative
Step 3: Hook up the 1 2.6V lithum battery to B terminals, positive to positive, negative to
negative.
Step 4: Hook up a device (e.g. WI-PMS310GF-Alien-I) which supports 24V DC in, positive to
positive, negative to negative.
Step 5: Power on the solar controller via DIP switch.
To the left
To the right
