2. Attwood
  3. 6100-AT-7

Attwood 6100-AT-7 Operating instructions

  • I've reviewed the user manual for the attwood PowerBase Antenna 6100-AT-7. This manual provides the necessary installation information, including required tools and components for the powered fold-down antenna base. I'm ready to answer any questions you have about this device and its features.
  • What is the model number of this antenna?
    Where is this product made?
    What size drill bits are required for installation?
    What type of switch is needed for installation?
PowerBase Antenna
Model 6100-AT-7
Made in Taiwan
(c) 2022 Advanced Systems Group, oneasg.com
1016 N. Monroe St, Lowell, MI 49331
N85W12545 Westbrook Crossing, Menomonee Falls, WI 53051
Part Number: 21403 Rev B 0422 U|xaCCGJHy02440ozX
REQUIRED FOR INSTALLATION (NOT INCLUDED):
• 7/32” & 3/4” Drill Bits
• #2 Phillips Driver
• Marine Grade Sealant
• PTFE Lubricant
• 2x 1-1/4” Fender Washers and 10-24
Nuts (If Through-Hole Mounting)
• 2-Position SPST Switch (with LED Backlight)
• PowerBase Antenna: Compatible with
most single-mount point antennas up to 8ft
in length (1”-14 Threaded)
Powered Fold-Down Antenna Base
WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.
/