Groupe Brandt SHD106XF1 Owner's manual

Category
Cooker hoods
Type
Owner's manual

This manual is also suitable for

FR GUIDE D'UTILISATION
ES MANUAL DE UTILIZACIÓN
EN GUIDE TO INSTALLATION
DE BETRIEBSANLEITUNG
Hotte décorative
Campana extractora decorativa
Decorative Hood
Dekor-Dunstabzugshaube
6
DESCRIPTION DE VOTRE APPAREIL
Ouïes
Cheminée
Enveloppe
Commandes
A
B
C
D
11 //
A LATTENTION DE L’UTILISATEUR
FR
2
7
4
m
m
331mm ( 900 /1200 )
271 mm ( 600 / 700 )
Evac Min 650- Max 1002
Reci Min 750-Max 1102
5
0
0
m
m
600 / 700 / 900 / 1200 m
m
608 mm
75 mm
B
C
A
D
24
DESCRIPCION DE SU APARATO
Aberturas
Chimenea
Carcasa
Mandos
A
B
C
D
11 //
A LA ATENCIÓN DEL USUARIO
ES
2
7
4
m
m
3
31
m
m
(
9
0
0
/12
0
0 )
271
m
m
( 6
0
0
/ 7
0
0
)
Evac Min 650- Max 1002
Reci Min 750-Max 1102
5
0
0
m
m
600 / 700 / 9
00 / 1200 m
m
608 mm
75 mm
B
C
A
D
30
33 //
UTILIZACIÓN DEL APARATO
ES
DESCRIPCIÓN DE LOS MANDOS *(Según modelos)
E
A
C
D
B
Puesta en marcha / Parada
A
B
C
Temporizador / Parada retar-
dada 10 minutos
Mandos
Disminución de la velocidad
D
E
Iluminación
F
G
F
G
Aumento de la velocidad
Turbo
H
I
H
I
Oxígeno *
Modo automático*
Aviso
Esta guía de instalación es válida para varios modelos. Pueden aparecer ligeras dife-
rencias de detalles y de equipamiento en el aparato y en las descripciones presentadas.
MODO AUTOMÁTICO (según modelos)
Estas campanas tienen una capacidad de adaptación ya que están equipadas de sensores que
se activan automáticamente cuando detectan cualquier emisión de calor o de vapor, adaptando
la velocidad de aspiración y dejando de funcionar cuando han evacuado todo el humo.
34
33 //
UTILIZACIÓN DEL APARATO
ES
SATURACIÓN DEL FILTRO DE CARBÓN (Filtro opcional)
AUTO STOP VENTILADOR
AUTO STOP ALUMBRADO
Si se olvida de apagar su campana, ésta se detendrá al cabo de 9 horas de funcionamiento.
Si se olvida de apagar luz de su campana, ésta se apagará al cabo de 9 horas de funciona-
miento.
SATURACIÓN DEL FILTRO CARTUCHO
Cuando el piloto
FF ppaarrppaaddeeaa
, nos indica que los filtros de cartucho deben limpiarse (ver capí-
tulo “Limpieza filtro cartucho”).
Presionar prolongadamente sobre la tecla para desbloquear la función “saturación”.
Cuando el piloto
FF nnoo ppaarrppaaddeeaa
, indica que los filtros de carbón deben cambiarse (ver capítulo
“Cambio del filtro de carbón”).
Presionar prolongadamente sobre la tecla para desbloquear la función “saturación”.
Únicamente en modo reciclaje.
MODO RECICLAJE / EVACUACIÓN
Presione prolongadamente y para elegir el modo de evacuación o reciclaje.
El piloto o se ilumina y la configuración puede comenzar.
Presione brevemente la tecla o para seleccionar el modo de reciclaje ( ) o el modo
de evacuación ( ).
Presione brevemente y para validar la configuración.
Presione brevemente sobre para anular la configuración.
38
As part of our commitment to constantly improving our products, we reserve the right to make
changes to them based on technical advances to their technical and functional features and ap-
pearance
Warning:
Before installing and using your appliance, please carefully read this Guide to
Installation and Use, which will allow you to quickly familiarise yourself with its operation.
ES
20
FR
02
EN
38
DE
56
39
TABLE OF CONTENTS
11 // NNOOTTIICCEESS TTOO TTHHEE UUSSEERR
• Safety recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
• Environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
• Description of your appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
22 // IINNSSTTAALLLLIINNGG YYOOUURR AAPPPPLLIIAANNCCEE
• Using the evacuation mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
• Using the recycling mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
• Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
• Assembling the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
• Assembling the ventilation shaft
º Outdoor evacuation ...........................................................................46
º Recycling ..............................................................................................47
33 // UUSSIINNGG YYOOUURR AAPPPPLLIIAANNCCEE
• Description of control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
44 // CCAARRIINNGG FFOORR
AANNDD CCLLEEAANNIINNGG YYOOUURR AAPPPPLLIIAANNCCEE
• Cleaning the filter cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• Changing the carbon filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• Cleaning the outer surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• Maintaining your appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
55 // TTRROOUUBBLLEESSHHOOOOTTIINNGG ...............................................................................................
...................................................................................................
50
66 // AAFFTTEERR--SSAALLEESS SSEERRVVIICCEE...................................................
.........................................................................................................................................
50
EN
40
1 / NOTICES TO THE USER
SAFETY RECOMMENDATIONS
— This oven was designed for use by private
persons in their homes.
— This appliance is not designed to be used by
people (including children) with reduced phys-
ical, sensorial or mental capacity or people
lacking in experience or knowledge, except if
they have the benefit, through the intermedi-
ary of a person responsible for their safety, of
preliminary supervision or instruction con-
cerning the use of the appliance. It is advis-
able to supervise children to make sure that
they do not treat the appliance as a toy.
— When you receive the appliance, unpack or
have it unpacked immediately. Give it an over-
all general inspection. Make note of any con-
cerns or reservations on the delivery slip and
make sure to keep a copy of this form.
— Your appliance is intended for standard
household use. Do not use it for commercial
or industrial purposes or for any other pur-
pose than that for which it was designed.
— Do not modify or attempt to modify any of
the characteristics of this appliance. This
would be dangerous to your safety.
— Repairs must only be carried out by an
approved specialist.
— Always unplug the hood before cleaning it
or performing other maintenance acts.
— Provide adequate ventilation for the room in
the case of simultaneous use of the hood and
other appliances powered by an energy
source other than electricity. This will prevent
the hood from aspirating the combustion gas-
es.
— You should never "flambé" dishes under the
hood or operate gas rings under the hood
without placing cookware on them (the flames
sucked up into the hood can damage the
appliance).
— When frying food under the appliance, you
must carefully monitor the preparation at all
times. Oils and grease brought to very high
temperatures can catch fire.
— Respect the recommended frequency of
cleaning and filter replacements. The accumu-
lation of grease deposits may cause a fire.
— The hood should never be used over a com-
bustible fuel burning stove (wood, coal, etc.).
— Never use steam or high-pressure devices
to clean your appliance (requirement imposed
by electrical safety).
— With a view to constantly improving our
products, we reserve the right to modify their
technical, functional or aesthetic characteris-
tics, making any changes to their features
considered necessary or desirable in view of
technical progress.
— In order to easily locate the reference infor-
mation for your appliance, we recommend
that you note these data on the "After-Sales
Service Department and Customer Relation
Attention
Keep this user guide with your appli-
ance. If the appliance is ever sold or trans-
ferred to another person, ensure that the
new owner receives the user guide. Please
become familiar with these recommenda-
tions before installing and using your appli-
ance. They were written for your safety and
the safety of others.
Warning
In the case of a kitchen heated by a
device connected to a chimney (a stove, for
example) the "recycling" version of the
hood should be installed. Do not use the
hood without metal filters.
Suitable ventilation should be provided in
the room when the hood is used at the
same time as appliances operated by gas
or another combustible fuel.
EN
41
Warning
Installation should only be performed by installers and qualified technicians.
Warning
Remove the protective film from the filter cartridge before use.
ENVIRONMENTAL PROTECTION
— This appliance's packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose.
— Your appliance also contains a great amount of recyclable material. It is marked with this label
to indicate the used appliances that should not be mixed with other waste. This way, the appli-
ance recycling organised by your manufacturer will be done under the best possible
conditions, in compliance with European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment. Contact your town hall or your retailer for the used appli-
ance collection points closest to your home.
— We thank you doing your part to protect the environment.
1 / NOTICES TO THE USER
EN
42
DESCRIPTION OF YOUR APPLIANCE
Vents
Ventilation shaft
Top surface
Control panel
A
B
C
D
1 / NOTICES TO THE USER
EN
2
7
4
m
m
3
31
m
m
(
9
0
0
/12
0
0 )
271
m
m
( 6
0
0
/ 7
0
0
)
Evac Min 650- Max 1002
Reci Min 750-Max 1102
5
0
0
m
m
600 / 700 / 9
00 / 1200 m
m
608 mm
75 mm
B
C
A
D
43
2 / INSTALLING YOUR APPLIANCE
USING THE EVACUATION MODE
If you possess an outlet to the exterior
(fig. 1)
Your hood can be connected to this outlet
using a flue (minimum diameter 125 mm that is
enamelled, in aluminium, flexible or made of
inflammable material). If your flue is less than
125 mm in diameter,
yyoouu mmuusstt uussee tthhee rreeccyy--
cclliinngg mmooddee..
USING THE RECYCLING MODE
If you do not possess an outlet to the exterior
(fig. 2)
All of our appliances can be used in recycling
mode.
In this case, you should add an active carbon
filter which will keep in odours.
(See Chapter 4: Changing the carbon filter.)
- The appliance must be unplugged during installation or when any repair or maintenance work
is being performed.
- Ensure that the network voltage corresponds to the voltage noted on the identification plate
located inside the hood.
- If the electrical installation at your residence requires any changes in order to hook up your
Appliance, call upon a professional electrician.
- If the hood is being used in evacuation mode, do not connect the appliance to a combustion
gas exhaust duct (boiler, chimney, etc.) or to a CMV (controlled mechanical ventilation) system.
- Under no circumstances should the exhaust duct empty into the attic.
- Install the hood at a safe distance of at least 70 cm from an electric, gas or combined cooking
hob.
EN
125
150
fig. 1
fig. 2
44
Warning
This appliance is delivered with a H 05
VVF power cord that has three-0.75 mm2
conductors (neutral, phase and ground). It
must be connected to the main power supply
(which should be a 220-240 V single phase
current) via a CEI 60083 standardised socket
that should remain accessible after installa-
tion, in keeping with installation guidelines.
We cannot be held responsible for any acci-
dent resulting from an inexistent, defective
or incorrect ground lead. The fuse for your
installation must be 10 or 16A. If the power
cable is damaged, call the after-sales serv-
ice department in order to avoid danger.
Warning
If the electrical installation at your resi-
dence requires any changes in order to hook
up your appliance, call upon a professional
electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse cor-
responding to the electrical socket where
your appliance is plugged in.
ELECTRICAL CONNECTIONS
During installation and maintenance opera-
tions, the appliance must be unplugged from
the electrical grid; fuses must be cut off or re-
moved.
The electrical connections are made before
the appliance is installed in its housing.
Ensur
e that:
- the electrical installation has sufficient volt-
age,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.
2 / INSTALLING YOUR APPLIANCE
EN
Important
The accessible parts of this appliance
may become hot if it is used with a cooking
appliance.
45
2 / INSTALLING YOUR APPLIANCE
ASSEMBLING THE HOOD
Warning
The hood must be installed in compli-
ance with all applicable regulations concern-
ing the ventilation of premises. In France
these regulations are described in DTU 61.1
from the CSTB. In particular, the evacuated
air should never be conveyed to a duct used
to evacuate smoke from appliances that use
gas or other combustible fuels. Unused
ducts may only be used after approval from
a competent specialist.
The minimum distance between the cooking
surface and the lowest part of the hood must
be 70 cm. If the instructions for the hob
installed under the hood specify a distance of
more than 70 cm, this requirement must be
respected.
— Draw a horizontal line 70 cm minimum from
the cooker top (A/fig. 1).
— Draw a vertical line (B/fig. 1) on the wall that
is centred over the cooker top and that ex-
tends from the horizontal line drawn in the
previous step (A) to the ceiling.
— Place the drilling template (C/fig. 1) on the
wall. In the case of a hollow wall, use suitable
wall plugs and screws.
— Drill the two holes. Insert the 2 wall plugs.
— Screw the fastening bar to the wall (C/fig. 2),
with the 2 screws (D/fig. 2)
— Hang the suction hood by its hooks (E/fig.
2).
— Adjust the height and level by moving the
clamping screws (E/fig. 2) of the supports
(the top screw for horizontal fit and the bot-
tom screw for fitting to the wall).
— Fit the anti-lifting screw (D/fig. 1)
— Remove the adhesive tape from the compo-
nent unit (F/fig. 3).
— Lift the unit around 2 cm then release it. Give
it a quarter turn then slide it and fasten it using
2 screws above the motor (fig. 3).
WWaarrnniinngg:: ddoo nnoott ddaammaaggee tthhee ccaabblleess wwhhiillee rroo--
ttaattiinngg aanndd ffaasstteenniinngg..
fig. 2
> 70 cm
=
=
C
A
B
fig. 1
EN
90°C
2cm
1
2
3
fig. 3
D
E
F
D
C
46
2 / INSTALLING YOUR APPLIANCE
EN
ASSEMBLING THE VENTILATION
SHAFT
•Outdoor evacuation
— Using the two screws (fig. 1), attach the met-
al chimney bracket against the wall, flush with
the ceiling for support.
— Mount the back-flow valve near the motor
outlet (fig. 2). This back-flow valve makes it
possible to block the entry of air from the out-
side.
— If a 125 mm flue is being installed, use the
adapter provided (fig. 3). If the diameter of
your exterior flue is less than125 mm, you
must connect your hood in recycling mode.
— Slide the end of the flue over the motor out-
let (fig. 4).
— Prepare your telescoping ventilation shaft,
taking care not to block the vents (B/fig. 4).
Fit the chimney to the hood and lift the upper
portion to adjust the height and then screw it
(G/fig.4) on the metal chimney bracket (A/fig.
4).
fig. 1
fig. 4
fig. 2
fig. 3
A
B
C
D
E
CChhiimmnneeyy bbrraacckkeett
FFlluuee
AAddaapptteerr
BBaacckk--ffllooww vvaallvvee
MMoottoorr oouuttlleett
F
TTeelleessccooppiinngg vveennttiillaattiioonn sshhaafftt
CChhiimmnneeyy hhoollddiinngg ssccrreeww
G
A
C
D
E
F
G
B
Tip
For optimal use of your appliance, we
recommend that you connect the hood to a
150 mm-diameter flue (not delivered with the
appliance). Minimise the number of angles
and bends and the lengths of the flue. In the
event that the hood will be operated using
outdoor evacuation, you should ensure a
sufficient inflow of fresh air to avoid a pres-
sure deficiency in the room.
47
2 / INSTALLING YOUR APPLIANCE
EN
•Recycling
— Remove the back-flow valve (fig. 1).
— Using the two screws (fig. 2), attach the plastic
smoke deflector against the wall, flush with the
ceiling for support. Be careful to centre the
deflector in relation to the vertical line drawn on
the wall (fig. 2).
For models up to 700 mm, add the 2 struts sup-
plied in the pocket (A/fig. 2)
— Slide one end of the flue over the deflector and
the other end over the motor outlet (fig. 3).
— Prepare your ventilation shaft, taking care to
face the vents upward so that they are visible
(B/fig. 3).
— Attach the assembled chimney (C/fig. 3) to the
hood and lift the upper portion to adjust the
height, then screw it to the smoke deflector
(A/fig. 3) using the two screws (F/fig. 3).
fig. 3
A
B
C
D
E
SSmmookkee ddeefflleeccttoorr
TTeelleessccooppiinngg vveennttiillaattiioonn sshhaafftt
FFlluuee
MMoottoorr bbrraacckkeett
VVeennttss
fig. 1
fig. 2
CChhiimmnneeyy hhoollddiinngg ssccrreeww
F
A
B
D
E
F
C
A
48
3 / USING YOUR APPLIANCE
EN
DESCRIPTION OF CONTROL PANEL *(Depending on model)
E
A
C
D
B
On / Off
A
B
C
Timer / Delayed shutdown
(10 min)
Indicator
Speed reduction
D
E
Lighting
F
G
F
G
Speed increase
Boost
H
I
H
I
Oxygen *
Automatic mode *
Tip
This guide to Installation and Use is valid for several models. Minor differences in
details and fittings may emerge between your appliance and the descriptions provided.
AUTOMATIC MODE (depending on model)
These hoods are designed with the capacity to adapt. Fitted with sensing devices, they activate
automatically when they detect any emission of steam or heat, spontaneously adapt suction
speed and stop operating when the last of the smoke has been evacuated.
49
3 / USING YOUR APPLIANCE EN
Selecting the type of hob in automatic mode *
To select your hob type, your hood should be switched off.
Press for >2s simultaneously on and to enter configuration mode. Press to select
the hob type: the indicator displays I for an induction hob, U for a ceramic hob and G for a gas
hob. Pressing once and simultaneously on and will validate your configuration.
Automatic mode setting
You have the possibility of refining the reaction time of your hood in automatic mode.
To adjust its sensitivity, press the button for more than 2s.
: minimum sensitivity
: average sensitivity
: maximum sensitivity
Press to increase sensitivity and to reduce it.
Press once to cancel your settings
Your settings are automatically validated after 10s.
Press . The indicator will flash and tell you that the hood is in automatic mode.
Changing to automatic mode
Shutting down the hood in automatic mode
You are in automatic mode and want to shut down your hood. Press .
Info
Timed shutdown is automatic in these hoods.
Through this system, the hood continues to operate for five, ten or fifteen minutes, depending
on the power used for cooking, in order to process and remove all smoke.
50
3 / USING YOUR APPLIANCEEN
SWITCHING ON THE HOOD IN MANUAL MODE
Pressing the button starts up the hood at speed 1 (the indicator displays 1).
SWITCHING OFF THE HOOD
Press the button to switch the hood off.
CHANGING SPEED
After starting up the hood, you can change the suction speed by pressing or .
The function allows your hood to remain for 10 min at maximum speed 4 and then change
to speed 2
At the end of cooking, you can select the button to shut down your hood. This function
maintains suction for 10 minutes at the selected speed.
To cancel delayed shutdown, press the same button to stop the delayed function.
DELAYED SHUTDOWN
51
3 / USING YOUR APPLIANCE EN
LIGHTING
Press the button once to switch the halogen lighting of your hood on or off.
Your hood (depending on the model) gives you the possibility of changing the intensity of the
light as you wish to make it more or less bright. Pressing and holding the button can vary
the intensity of the lighting.
OXYGEN FUNCTION (DEPENDING ON MODEL)
Press the button once to switch on the hood at reduced speed and in silent mode for 1
hour. The indicator is displayed.
To shut down this function press again.
PPrrooggrraammmmiinngg tthhee OOxxyyggeenn ffuunnccttiioonn
Press and hold the button to activate the programming.
11
and will flash alternately, indicating the start of programming.
Every time the button is pressed once, this will increase the period of operation of the
Oxygen function (from 2h to 9h maximum). The hood will operate at reduced speed and in silent
mode during the selected period. The figure representing the time in hours (1, 2, 3, 4, 5, 6, 7, 8
or 9) and will flash alternately throughout the Oxygen program.
Every time the button is pressed once the time will be reduced (from 8h to 1h).
The program is validated automatically after 10 min.
Programming can be cancelled before automatic validation by pressing the button .
To shut down this function press
52
33 //
USING YOUR APPLIANCE
EN
CARBON FILTER SATURATION (Optional filter)
AUTOMATIC FAN SHUTDOWN
AUTOMATIC LIGHTING SHUTDOWN
If you forget to switch off your hood, it will shut down after 9 hours’ operation.
If you forget to switch off the lighting on your hood, it will shut down after 9 hours’ operation.
FILTER CARTRIDGE SATURATION
When the
FF iinnddiiccaattoorr iiss ffllaasshhiinngg
, this indicates that the filter cartridges should be cleaned (see
section on “Cleaning the filter cartridge”).
Press and hold the button to release the “saturation” function.
When the
FF iinnddiiccaattoorr iiss nnoott ffllaasshhiinngg
, it indicates that the carbon filters should be changed (see
section on “Changing the carbon filter”).
Press and hold the button to release the “saturation” function.
Only in recycling mode.
RECYCLING / EVACUATION MODE
Press and hold the and buttons to select Evacuation or
Recycling mode. The or indicator is displayed. You can now enter your settings.
Press or once to select recycling mode ( ) or evacuation mode ( ).
Press and once to validate the settings.
Press once to cancel the settings.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Groupe Brandt SHD106XF1 Owner's manual

Category
Cooker hoods
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI