MSI MS-7640v2.2 Owner's manual



990FXA-GD80 seres

MS-7640 (v2.x) Manboard

G52-76401XJ



Preface

MS-7640

Preface

MS-7640

Preface

Copyrght Notce

The materal n ths document s the ntellectual property of MICRO-STAR

INTERNATIONAL. We take every care n the preparaton of ths document, but no

guarantee s gven as to the correctness of ts contents. Our products are under contnual

mprovement and we reserve the rght to make changes wthout notce.

Trademarks

All trademarks n ths manual are propertes of ther respectve owners.

MSI

®

s regstered trademark of Mcro-Star Int’l Co.,Ltd.

NVIDIA

®

s regstered trademark of NVIDIA Corporaton.

ATI

®

s regstered trademark of AMD Corporaton.

AMD

®

s regstered trademarks of AMD Corporaton.

Intel

®

s regstered trademarks of Intel Corporaton.

Wndows

®

s regstered trademarks of Mcrosoft Corporaton.

AMI

®

s regstered trademark of Amercan Megatrends Inc.

Award

®

s a regstered trademark of Phoenx Technologes Ltd.

Sound Blaster

®

s regstered trademark of Creatve Technology Ltd.

Realtek

®

s regstered trademark of Realtek Semconductor Corporaton.

JMcron

®

s regstered trademark of JMcron Technology Corporaton.

Netware

®

s regstered trademark of Novell, Inc.

Lucd

®

s trademark of LucdLogx Technologes, Ltd.

VIA

®

s regstered trademark of VIA Technologes, Inc.

ASMeda

®

s regstered trademark of ASMeda Technology Inc.

Pad, Phone, and Pod are trademarks of Apple Inc.

Revson Hstory

Revson Revson Hstory Date

V2.0 Frst release for Europe 2011/05

Techncal Support

If a problem arses wth your system and no soluton can be obtaned from the user’s

manual, please contact your place of purchase or local dstrbutor. Alternatvely, please

try the followng help resources for further gudance.

Vst the MSI webste for techncal gude, BIOS updates, drver updates, and

other nformaton:

http://www.ms.com/servce/download

Contact our techncal sta at:

http://support.ms.com

￭

◙

Preface

MS-7640

Preface



Preface

MS-7640

Preface

Safety Instructons

Always read the safety nstructons carefully.

Keep ths User’s Manual for future reference.

Keep ths equpment away from humdty.

Lay ths equpment on a relable at surface before settng t up.

The openngs on the enclosure are for ar convecton hence protects the equpment

from overheatng. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V before

connectng the equpment to the power nlet.

Place the power cord such a way that people can not step on t. Do not place any

-

thng over the power cord.

Always Unplug the Power Cord before nsertng any add-on card or module.

All cautons and warnngs on the equpment should be noted.

Never pour any lqud nto the openng that could damage or cause electrcal

shock.

If any of the followng stuatons arses, get the equpment checked by servce

personnel:

The power cord or plug s damaged.

Lqud has penetrated nto the equpment.

The equpment has been exposed to mosture.

The equpment does not work well or you can not get t work accordng to User’s

Manual.

The equpment has dropped and damaged.

The equpment has obvous sgn of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,

STORAGE TEMPERATURE ABOVE 60

o

C (140

o

F), IT MAY DAMAGE THE EQUIP-

MENT.

CAUTION: Danger of exploson f battery s ncorrectly replaced.

Replace only wth the same or equvalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，

使用者會被要求採取某些適當的對策。

廢電池請回收

For better envronmental protecton, waste batteres should be

collected separately for recyclng specal dsposal.

￭

◯

v

Preface

MS-7640

Preface

MS-7640

Preface

FCC-B Rado Frequency Interference Statement

Ths equpment has been tested and found

to comply wth the lmts for a Class B dg-

tal devce, pursuant to Part 15 of the FCC

Rules. These lmts are desgned to provde

reasonable protecton aganst harmful nter-

ference n a resdental nstallaton. Ths equpment generates, uses and can radate

rado frequency energy and, f not nstalled and used n accordance wth the nstruc-

tons, may cause harmful nterference to rado communcatons. However, there s no

guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment

does cause harmful nterference to rado or televson recepton, whch can be deter-

mned by turnng the equpment o and on, the user s encouraged to try to correct the

nterference by one or more of the measures lsted below.

Reorent or relocate the recevng antenna.

Increase the separaton between the equpment and recever.

Connect the equpment nto an outlet on a crcut derent from that to whch the

recever s connected.

Consult the dealer or an experenced rado/televson techncan for help.

Notce 1

The changes or modcatons not expressly approved by the party responsble for com

-

plance could vod the user’s authorty to operate the equpment.

Notce 2

Shelded nterface cables and A.C. power cord, f any, must be used n order to comply

wth the emsson lmts.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

◯

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the follow

-

ng two condtons:

ths devce may not cause harmful nterference, and

ths devce must accept any nterference receved, ncludng nterference that may

cause undesred operaton.

1)

2)

Mcro-Star Internatonal

MS-7640

Preface

MS-7640

Preface

v

Preface

MS-7640

Preface

WEEE (Waste Electrcal and Electronc Equpment) Statement

ENGLISH

To protect the global envronment and as an envronmentalst, MSI must re-

mnd you that...

Under the European Unon (“EU”) Drectve on Waste Electrcal and Elec

-

tronc Equpment, Drectve 2002/96/EC, whch takes eect on August 13,

2005, products of “electrcal and electronc equpment” cannot be dscarded

as muncpal waste anymore and manufacturers of covered electronc equp

-

ment wll be oblgated to take back such products at the end of ther useful lfe. MSI wll

comply wth the product take back requrements at the end of lfe of MSI-branded prod

-

ucts that are sold nto the EU. You can return these products to local collecton ponts.

DEUTSCH

Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek

-

tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI

hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n

de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus

zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-

schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.

FRANÇAIS

En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...

Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec

-

trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les

produts électrques et électronques ne peuvent être déposés dans les décharges ou

tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de

récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve

au retour des produts en n de ve au sen de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Page is loading ...

En-2

MS-7640 Manboard

Manboard Speccatons

Processor Support

AMD

®

Phenom

TM

II X6/ X4/ X3/ X2, Athlon

TM

II X4/ X3/ X2 and Sempron

TM

processor

n the AM3+ package.

(For the latest nformaton about CPU, please vst http://www.ms.com/servce/cpu-

support/)

HyperTransport

HyperTransport™ 3.0, supports up to 5.2 GT/s

Chpset

North Brdge: AMD

®

990FX chpset

South Brdge: AMD

®

SB950 chpset

Memory Support

DDR3 2133 *(OC)/ 1800 *(OC)/ 1600 *(OC)/ 1333/ 1066 SDRAM (total 32 GB Max)

4 DDR3 DIMMs, supports Dual-Channel mode

*(OC means OverClockng, for more nformaton on compatble components, please

vst http://www.ms.com/ndex.php?func=testreport)

LAN

Supports PCIE Gb LAN (10/100/1000) by Realtek

®

RTL8111E

IEEE 1394

Chp ntegrated by VIA

®

VT6315N

2 IEEE 1394 ports

Audo

HD audo codec ntegrated by Realtek

®

ALC892

Flexble 8-channel audo wth jack sensng

SATA

6 SATA 6Gb/s ports (SATA1~6) by AMD

®

SB950

2 eSATA/ USB Combo ports by JMcron

®

JMB362

Supports hot plug & asynchronous notcaton

USB 3.0

2 USB 3.0 ports (back panel) and 1 USB 3.0 connector by NEC D720200

RAID

SATA1~6 support RAID 0/ 1/ 5/ 10 mode by AMD

®

SB950

■

En-3

Englsh

Connectors

Back panel

1 PS/2 keyboard port

1 PS/2 mouse port

1 Clear CMOS button

1 Coaxal S/PDIF-Out port

1 Optcal S/PDIF-Out port

4 USB 2.0 ports

2 USB 3.0 ports

2 eSATA/ USB 2.0 Combo ports

1 LAN port

1 IEEE 1394 port

6 exble audo ports

On-Board

2 USB 2.0 connectors

1 IEEE 1394 connector

1 Seral port connector

1 Chasss Intruson connector

1 S/PDIF-Out connector

1 Front Panel Audo connector

1 TPM Module connector

1 Power button

1 Reset button

1 OC Gene button

1 Debug LED panel

Slots

4 PCIE x16 slots

PCI_E2 supports up to PCIE x16 speed

PCI_E4 supports up to PCIE x8 speed

PCI_E5 supports up to PCIE x16 speed (when PCI_E4 s empty)

PCI_E6 supports up to PCIE x4 speed

Supports ATI

®

CrossFreX™ technology

If you ntend to nstall two expanson cards, please nstall them nto PCI_E2 &

PCI_E5 slots

If you ntend to nstall three expanson cards nto PCI_E2, PCI_E4 & PCI_E5 slots,

these three PCIE x16 lanes wll auto arrange from x16/ x0/ x16 to x16/ x8/ x8

2 PCIE x1 slots

1 PCI slot, supports 3.3V/ 5V PCI bus Interface

Form Factor

ATX (24.4cm X 30.5 cm)

Mountng

9 mountng holes

If you need to purchase accessores and request the part numbers, you could search

the product web page and nd detals on our web address below

http://www.ms.com/ndex.php

■

-

■

-

■

-

■

Page is loading ...

En-5

Englsh

SO CK E T AM 3

Screw Holes

When you nstall the manboard, you have to place the manboard nto the chasss n the

correct drecton. The locatons of screws holes on the manboard are shown as below.

Refer above pcture to nstall standos n the approprate locatons on chasss and then

screw through the manboard screw holes nto the standos.

Important

To prevent damage to the manboard, any contact between the manboard crcut and

chasss or unnecessary standos mounted on the chasss s prohbted.

Please make sure there s no metal components placed on the manboard or wthn

the chasss that may cause short crcut of the manboard.

•

Screw holes

The sde has to toward

the rear, the poston

for the I/O sheld of the

chasss.

En-6

MS-7640 Manboard

CPU (Central Processng Unt)

When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng.

If you do not have the CPU cooler, consult your dealer before turnng on the computer.

For the latest nformaton about CPU, please vst http://www.ms.com/servce/cpu-sup

-

port/

Important

Overheatng

Overheatng wll serously damage the CPU and system. Always make sure the coolng

fan can work properly to protect the CPU from overheatng. Make sure that you apply

an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to

enhance heat dsspaton.

Replacng the CPU

Whle replacng the CPU, always turn o the ATX power supply or unplug the power

supply’s power cord from the grounded outlet rst to ensure the safety of CPU.

Overclockng

Ths manboard s desgned to support overclockng. However, please make sure your

components are able to tolerate such abnormal settng, whle dong overclockng. Any

attempt to operate beyond product speccatons s not recommended. We do not guar

-

antee the damages or rsks caused by nadequate operaton or beyond product spec-

catons.

Gold arrow

Introducton to AM3+ CPU

The surface of CPU. Remember to apply some thermal paste on t for better heat

dsperson.

En-7

Englsh

CPU & Cooler Installaton

When you are nstallng the CPU, make sure the CPU has a cooler attached on the top

to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU

before nstallng the heat snk/cooler fan for better heat dsperson.

Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll

cause the damage of your CPU & manboard

If the CPU s correctly nstalled, the

pns should be completely embedded

nto the socket and can not be seen.

Please note that any volaton of the

correct nstallaton procedures may

cause permanent damages to your

manboard.

3. Press the CPU down rmly nto the

socket and close the lever. As the

CPU s lkely to move whle the lever

s beng closed, always close the le-

ver wth your ngers pressng tghtly

on top of the CPU to make sure the

CPU s properly and completely em-

bedded nto the socket.

4.

Pull the lever sdeways away from

the socket. Make sure to rase the

lever up to a 90-degree angle.

1.

Look for the gold arrow of the CPU.

The gold arrow should pont as shown

n the pcture. The CPU can only t n

the correct orentaton.

2.

En-8

MS-7640 Manboard

Important

Whle dsconnectng the Safety Hook from the xed bolt, t s necessary to keep an eye

on your ngers, because once the Safety Hook s dsconnected from the xed bolt, the

xed lever wll sprng back nstantly.

Poston the coolng set onto the re-

tenton mechansm.

Hook one end of the clp to hook

rst.

5. Then press down the other end of the

clp to fasten the coolng set on the

top of the retenton mechansm.

Locate the Fx Lever and lft up t.

6.

Fasten down the lever.7. Attach the CPU Fan cable to the CPU

fan connector on the manboard.

8.

En-9

Englsh

Memory

These DIMM slots are used for nstallng memory modules. For more nformaton on

compatble components, please vst

http://www.ms.com/servce/test-report/

DDR3

240-pn, 1.5V

48x2=96 pn 72x2=144 pn

Dual-Channel mode Populaton Rule

In Dual-Channel mode, the memory modules can transmt and receve data wth two

data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system

performance. The followng llustratons explan the populaton rules for Dual-Channel

mode.

1

DIMM1

DIMM3

DIMM2

DIMM4

2

DIMM1

DIMM3

DIMM2

DIMM4

Installed

Empty

Important

DDR3 memory modules are not nterchangeable wth DDR2 and the DDR3 standard

s not backwards compatble. You should always nstall DDR3 memory modules n

the DDR3 DIMM slots.

In Dual-Channel mode, make sure that you nstall memory modules of the

same type

and densty n derent channel DIMM slots.

To enable successful system boot-up, always nsert the memory modules nto the

DIMM1 rst.

Due to the chpset resource deployment, the system densty wll only be detected up

to 31+GB (not full 32GB) when each DIMM s nstalled wth a 8GB memory module.

•

En-10

MS-7640 Manboard

Installng Memory Modules

The memory module has only one notch on the center and wll only t n the rght

orentaton.

Insert the memory module vertcally nto the DIMM slot. Then push t n untl the

golden nger on the memory module s deeply nserted n the DIMM slot. The plastc

clp at each sde of the DIMM slot wll automatcally close when the memory module

s properly seated.

Manually check f the memory module has been locked n place by the DIMM slot

clps at the sdes.

Notch

Volt

Important

You can barely see the golden nger f the memory module s properly nserted n the

DIMM slot.

1.

2.

3.

En-11

Englsh

Power Supply

ATX 24-pn Power Connector: JPWR1

Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX

24-pn power supply, make sure the plug of the power supply s nserted n the proper

orentaton and the pns are algned. Then push down the power supply rmly nto the

connector.

You may use the 20-pn ATX power supply as you lke. If you’d lke to use the 20-pn

ATX power supply, please plug your power supply along wth pn 1 & pn 13.

13.+3.3

V

1.+3.3

V

14.-12V

2.+3.3

V

15.Ground

3

.Ground

16.PS-ON

#

4.+5

V

17.Ground

5

.Ground

18.Ground

6.+5

V

19.Ground

7

.Ground

22.+5

V

10.+12V

20.Res

8.PW

R O

K

23.+5

V

11

.+12V

21.+5

V

9.5VSB

24.Ground

12.+3.3

V

ATX 8-pn Power Connector: JPWR2

Ths connector s used to provde +12V power.

7.+12V

3.

Ground

5.+12V

1.

Ground

8.+12V

4

.Ground

6.+12V

2

.Ground

Important

Make sure that all the connectors are connected to proper ATX power supples to en-

sure stable operaton of the manboard.

En-12

MS-7640 Manboard

Back Panel

Mouse/Keyboard

The standard PS/2

®

mouse/keyboard DIN connector s for a PS/2

®

mouse/keyboard.

Clear CMOS Button

There s a CMOS RAM on board that has a power supply from external battery to keep

the system conguraton data. Wth the CMOS RAM, the system can automatcally

boot OS every tme t s turned on. If you want to clear the system conguraton, use

the button to clear data. Press the button to clear the data.

Important

Make sure that you power o the system before clearng CMOS data.

After pressng ths button to clear CMOS data n power o (G3) state, the system wll

boot automatcally.

Coaxal S/PDIF-Out

Ths SPDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dgtal

audo transmsson to external speakers through a coaxal cable.

Optcal S/PDIF-Out

Ths SPDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dgtal

audo transmsson to external speakers through an optcal ber cable.

1394 Port

The IEEE1394 port on the back panel provdes connecton to IEEE1394 devces.

USB 2.0 Port

The USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard,

mouse, or other USB-compatble devces. Supports data transfer rate up to 480Mbt/s

(H-Speed).

▶

•

▶

Keyboard

Lne-In

Lne-Out

Mc

RS-Out

CS-Out

SS-Out

Mouse

Clear

CMOS

Button

USB 2.0 Port

USB 3.0 Port

eSATA/ USB 2.0

Combo Port

Coaxal

S/PDIF-Out

Optcal

S/PDIF-Out

USB 2.0

Port

LAN

1394 Port

En-13

Englsh

USB 3.0 Port

USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate

up to 5 Gbt/s (SuperSpeed).

Important

If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to

the USB 3.0 port.

eSATA/ USB 2.0 Combo Port

The eSATA/USB 2.0 combo port s for attachng the eSATA external hard drve or USB

2.0 devce.

LAN

The standard RJ-45 LAN jack s for connecton to the

Local Area Network (LAN). You can connect a net-

work cable to t.

LED Color LED State Condton

Left Yellow O LAN lnk s not establshed.

On(Steady state) LAN lnk s establshed.

On(brghter & pulsng) The computer s communcatng wth another computer on the LAN.

Rght

Green O 10 Mbt/sec data rate s selected.

On 100 Mbt/sec data rate s selected.

Orange On 1000 Mbt/sec data rate s selected.

Audo Ports

These audo connectors are used for audo devces. It s easy to derentate between

audo eects accordng to the color of audo jacks.

Lne-In (Blue) - Lne In, s used for external CD player, tape-player or other

audo devces.

Lne-Out (Green) - Lne Out, s a connector for speakers or headphones.

Mc (Pnk) - Mc, s a connector for mcrophones.

RS-Out (Black) - Rear-Surround Out n 4/ 5.1/ 7.1 channel mode.

CS-Out (Orange) - Center/ Subwoofer Out n 5.1/ 7.1 channel mode.

SS-Out (Gray) - Sde-Surround Out 7.1 channel mode.

▶

■

Yellow Green/ Orange

En-14

MS-7640 Manboard

Connectors

Seral ATA Connector: SATA1~6

Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect

to one Seral ATA devce.

* The MB layout n ths gure s for reference only.

SATA5_6

SATA3_4

SATA1_2

SATA1~6 (6Gb/s)

supported by SB950

Important

Please do not fold the Seral ATA cable nto 90-degree angle. Otherwse, data loss may

occur durng transmsson.

Chasss Intruson Connector: JCI1

Ths connector connects to the chasss ntruson swtch cable. If the chasss s opened,

the chasss ntruson mechansm wll be actvated. The system wll record ths status

and show a warnng message on the screen. To clear the warnng, you must enter the

BIOS utlty and clear the record.

1

.

C

I

N

T

R

U

2

.

G

r

o

u

n

d

En-15

Englsh

Fan Power Connectors: CPUFAN, SYSFAN1~4

The fan power connectors support system coolng fan wth +12V. When connectng the

wre to the connectors, always note that the red wre s the postve and should be con-

nected to the +12V; the black wre s Ground and should be connected to GND. If the

manboard has a System Hardware Montor chpset on-board, you must use a specally

desgned fan wth speed sensor to take advantage of the CPU fan control.

1

.Ground

2.+12V

3.Sensor

/ N

o U

se

1

.

G

r

o

u

n

d

2

.

+

1

2

V

3

.

S

e

n

s

o

r

4

.

C

o

n

t

r

o

l

CPUFAN

SYSFAN1~4

Important

Please refer to the recommended CPU fans at processor’s ocal webste or consult

the vendors for proper CPU coolng fan.

CPUFAN supports fan control. You can nstall

Control Center utlty that wll automat-

cally control the CPU fan speed accordng to the actual CPU temperature.

Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN.

Front Panel Audo Connector: JAUD1

Ths connector allows you to connect the front panel audo and s complant wth Intel

®

Front Panel I/O Connectvty Desgn Gude.

1

.

M

I

C

L

3

.

M

I

C

R

1

0

.

H

e

a

d

P

h

o

n

e

D

e

t

e

c

t

i

o

n

5

.

H

e

a

d

P

h

o

n

e

R

7

.

S

E

N

S

E

_

S

E

N

D

9

.

H

e

a

d

P

h

o

n

e

L

8

.

N

o

P

i

n

6

.

M

I

C

D

e

t

e

c

t

i

o

n

4

.

P

R

E

S

E

N

C

E

#

2

.

G

r

o

u

n

d

•

En-16

MS-7640 Manboard

Front Panel Connectors: JFP1, JFP2

These connectors are for electrcal connecton to the front panel swtches and LEDs.

The JFP1 s complant wth Intel

®

Front Panel I/O Connectvty Desgn Gude.

1

.Ground

3.Suspend

LE

D

5.Power

LE

D

7.No Pi

n

8.

+

6.

-

4.

+

2.

-

Buzzer

S

peaker

1.+

3.

-

10.No

Pi

n

5.

-

Reset

S

witch

HDD

LE

D

P

ower

S

witch

P

ower

LE

D

7.

+

9.Reserve

d

8.

-

6.

+

4.

-

2.

+

JFP1

JFP2

S/PDIF-Out Connector: JSP1

Ths connector s used to connect S/PDIF (Sony & Phlps Dgtal Interconnect Format)

nterface for dgtal audo transmsson.

11

5V

3.VC

C

2.SPDIF

1

.Ground

* The MB layout n ths gure s for reference only.

S/PDIF-Out Bracket (optonal)

En-17

Englsh

Front USB 2.0 Connector: JUSB1, JUSB2

Ths connector, complant wth Intel

®

I/O Connectvty Desgn Gude, s deal for

connectng hgh-speed USB nterface perpherals such as USB HDD, dgtal cameras,

MP3 players, prnters, modems and the lke.

The

JUSB1 (red mark)

supports the MSI newly Super-Charger technology whch

provdes fast chargng functon anytme for chargng your Smartphone.

If your system s n S0 / S1 state, you must nstall MSI’s applcaton, SuperCharger, to

control the

JUSB1

. When the applcaton s set to “On”, t can fast charge Smartphone

va

JUSB1

but the data transmsson and synchronzaton wll be dsabled. When the

applcaton s set to “O”, the

JUSB1

wll work as a normal USB connector. In S3 / S4 /

S5 state,

JUSB1

can stll provdes fast chargng functon wthout operatng system, no

matter you un-plug and re-plug the Smartphone.

* The MB layout n ths gure s for reference only.

USB 2.0 Bracket (optonal)

Important

Note that the pns of VCC and GND must be connected correctly to avod possble

damage.

For Pad,

JUSB1 (red mark) can stll charge Pad n S3, S4, S5 state.

Please note that connectng one devce once for stable chargng s recommended.

Super-Charger technology would be avalable on specc models, please refer to MSI

webste for model support lst.

We recommend that don’t dsconnect the devce when you charge t n S1 state.

•

Page is loading ...

MSI MS-7640v2.2 Owner's manual

This manual is also suitable for

MSI MS-7640v2.2 Owner's manual

in other languages

Related papers

Other documents