Turbosound TCS52C-T-WH Quick start guide

Brand: Turbosound

Model: TCS52C-T-WH

Category: Loudspeakers

Type: Quick start guide

This manual is also suitable for

TCS32C-T-WH

Turbosound TCS52C-T-WH is a 2-way, 5"/3.5" full-range ceiling loudspeaker with a line transformer for installation applications. It features a wide frequency response of 55 Hz - 20 kHz and a maximum SPL of 109 dB, making it suitable for a variety of applications, including background music, paging, and announcements. The loudspeaker has a white finish and a paintable grille, allowing it to blend in with any décor. It comes with a mounting bracket for easy installation.

TCS52C-T-WH/TCS32C-T-WH

2 Way 5"/3.5" Full Range Ceiling Loudspeaker with

Line Transformer for Installation Applications (White)

TCS

SERIES

TCS52C-T-WH/TCS32C-T-WH Quick Start Guide

Terminals marked with this

symbol carry electrical

current of sufﬁ cient magnitude

to constitute risk of electric shock. Use only

high-quality commercially-available speaker

cables with plugs pre-installed. All other

installation or modiﬁ cation should be

performed only by qualiﬁ ed personnel.

This symbol, wherever it

appears, alerts you to the

presence of uninsulated

dangerous voltage inside the enclosure -

voltage that may be sufﬁ cient to constitute

a risk of shock.

This symbol, wherever it

appears, alerts you to important

operating and maintenance

instructions in the accompanying literature.

Please read the manual.

Caution

To reduce the risk of electric

shock, do not remove the

top cover (or the rear section). No user

serviceable parts inside. Refer servicing to

qualiﬁ ed personnel.

Caution

To reduce the risk of ﬁ re or

electric shock, do not expose

this appliance to rain and moisture.

The apparatus shall not be exposed to

dripping or splashing liquids and no objects

ﬁ lled with liquids, such as vases, shall be

placed on the apparatus.

Caution

These service instructions are

for use by qualiﬁ ed service

personnel only. To reduce the risk of

electric shock do not perform any servicing

other than that contained in the operation

instructions. Repairs have to be performed

by qualiﬁ ed service personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including ampliﬁ ers)

that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with one

wider than the other. A grounding-type

plug has two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety. If the

provided plug does not ﬁ t into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11. Use only attachments/accessories

speciﬁ ed by the manufacturer.

12. Use only with

the cart, stand,

tripod, bracket,

or table speciﬁ ed by

the manufacturer,

or sold with

the apparatus.

When a cart is used,

use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualiﬁ ed service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

15. The apparatus shall be connected to

a MAINS socket outlet with a protective

earthing connection.

16. Where the MAINS plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain

readily operable.

17. Correct disposal of

this product: This symbol

indicates that this product

must not be disposed of

with household waste,

according to the WEEE

Directive (2012/19/EU)

and your national law.

This product should be taken to a collection

center licensed for the recycling of waste

electrical and electronic equipment (EEE).

The mishandling of this type of waste could

have a possible negative impact on the

environment and human health due to

potentially hazardous substances that are

generally associated with EEE. At the same

time, your cooperation in the correct

disposal of this product will contribute to

the efﬁ cient use of natural resources.

For more information about where you can

take your waste equipment for recycling,

please contact your local city ofﬁ ce, or your

household waste collection service.

LEGAL DISCLAIMER

MUSIC Group accepts no liability for

any loss which may be suffered by any

person who relies either wholly or in

part upon any description, photograph,

or statement contained herein. Technical

speciﬁ cations, appearances and other

information are subject to change

without notice. All trademarks are the

property of their respective owners.

MIDAS, KLARK TEKNIK, TURBOSOUND,

BEHRINGER, BUGERA and DDA are

trademarks or registered trademarks of

MUSIC Group IP Ltd. © MUSIC Group IP

LIMITED WARRANTY

For the applicable warranty terms and

conditions and additional information

regarding MUSIC Group’s Limited

Warranty, please see complete details

online at music-group.com/warranty.

Important Safety

Instructions

Instrucciones de

seguridad

Las terminales marcadas con

este símbolo transportan

corriente eléctrica de magnitud

suﬁ ciente como para constituir un riesgo de

descarga eléctrica. Utilice solo cables de

altavoz de alta calidad con clavijas

TS de 6,3 mm pre-instaladas

(puede adquirirlos en comercios

especializados en audio). Cualquier otra

instalación o modiﬁ cación debe ser

realizada únicamente por un

técnico cualiﬁ cado.

Este símbolo, siempre que

aparece, le advierte de la

presencia de voltaje peligroso

sin aislar dentro de la caja; este voltaje

puede ser suﬁ ciente para constituir un

riesgo de descarga.

Este símbolo, siempre que

aparece, le advierte sobre

instrucciones operativas y de

mantenimiento que aparecen en la

documentación adjunta. Por favor,

lea el manual.

Atención

Para reducir el riesgo de

descarga eléctrica, no quite

la tapa (o la parte posterior). No hay

piezas en el interior del equipo que

puedan ser reparadas por el usuario.

Si es necesario, póngase en contacto con

personal cualiﬁ cado.

Atención

Para reducir el riesgo de

incendio o descarga eléctrica,

no exponga este aparato a la lluvia,

humedad o alguna otra fuente que pueda

salpicar o derramar algún líquido sobre

el aparato. No coloque ningún tipo de

recipiente para líquidos sobre el aparato.

Atención

Las instrucciones de servicio

deben llevarlas a cabo

exclusivamente personal cualiﬁ cado.

Para evitar el riesgo de una descarga

eléctrica, no realice reparaciones que no

se encuentren descritas en el manual de

operaciones. Las reparaciones deben

ser realizadas exclusivamente por

personal cualiﬁ cado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atención a todas

las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un paño seco.

7. No bloquee las aberturas de

ventilación. Instale el equipo de acuerdo

con las instrucciones del fabricante.

8. No instale este equipo cerca de

fuentes de calor tales como radiadores,

acumuladores de calor, estufas u otros

aparatos (incluyendo ampliﬁ cadores) que

puedan producir calor.

9. No elimine o deshabilite nunca la

conexión a tierra del aparato o del cable

de alimentación de corriente. Un enchufe

polarizado tiene dos polos, uno de los

cuales tiene un contacto más ancho que

el otro. Una clavija con puesta a tierra

dispone de tres contactos: dos polos y

la puesta a tierra. El contacto ancho y el

tercer contacto, respectivamente, son

los que garantizan una mayor seguridad.

Si el enchufe suministrado con el equipo

no concuerda con la toma de corriente,

consulte con un electricista para cambiar la

toma de corriente obsoleta.

10. Coloque el cable de suministro de

energía de manera que no pueda ser pisado

y que esté protegido de objetos aﬁ lados.

Asegúrese de que el cable de suministro de

energía esté protegido, especialmente en la

zona de la clavija y en el punto donde sale

del aparato.

11. Use únicamente los dispositivos o

accesorios especiﬁ cados por el fabricante.

12. Use únicamente

la carretilla,

plataforma, trípode,

soporte o mesa

especiﬁ cados

por el fabricante

o suministrados

junto con el equipo.

Al transportar el

equipo, tenga cuidado para evitar daños y

caídas al tropezar con algún obstáculo.

13. Desenchufe el equipo durante

tormentas o si no va a utilizarlo durante un

periodo largo.

14. Confíe las reparaciones únicamente a

servicios técnicos cualiﬁ cados. La unidad

requiere mantenimiento siempre que

haya sufrido algún daño, si el cable

de suministro de energía o el enchufe

presentaran daños, se hubiera derramado

un líquido o hubieran caído objetos dentro

del equipo, si el aparato hubiera estado

expuesto a la humedad o la lluvia, si ha

dejado de funcionar de manera normal o si

ha sufrido algún golpe o caída.

15. Al conectar la unidad a la toma de

corriente eléctrica asegúrese de que la

conexión disponga de una unión a tierra.

16. Si el enchufe o conector de red sirve

como único medio de desconexión,

éste debe ser accesible fácilmente.

17. Cómo debe

deshacerse de este

aparato: Este símbolo

indica que este aparato no

debe ser tratado como

basura orgánica, según lo

indicado en la Directiva

WEEE (2012/19/EU) y a las

normativas aplicables en su país. En lugar

de ello deberá llevarlo al punto limpio más

cercano para el reciclaje de sus elementos

eléctricos / electrónicos (EEE). Al hacer esto

estará ayudando a prevenir las posibles

consecuencias negativas para el medio

ambiente y la salud que podrían ser

provocadas por una gestión inadecuada de

este tipo de aparatos. Además, el reciclaje

de materiales ayudará a conservar los

recursos naturales. Para más información

acerca del reciclaje de este aparato,

póngase en contacto con el Ayuntamiento

de su ciudad o con el punto limpio local.

NEGACIÓN LEGAL

MUSIC Group no admite ningún tipo

de responsabilidad por cualquier

daño o pérdida que pudiera sufrir

cualquier persona por conﬁ ar total

o parcialmente en la descripciones,

fotografías o aﬁ rmaciones contenidas

en este documento. Las especiﬁ caciones

técnicas, imágenes y otras informaciones

contenidas en este documento

están sujetas a modiﬁ caciones sin

previo aviso. Todas las marcas

comerciales que aparecen aquí son

propiedad de sus respectivos dueños.

MIDAS, KLARK TEKNIK, TURBOSOUND,

BEHRINGER, BUGERA y DDA son marcas

comerciales o marcas registradas de

MUSIC Group IP Ltd. © MUSIC Group IP

Ltd. 2014 Reservados todos los derechos.

GARANTÍA LIMITADA

Si quiere conocer los detalles y condiciones

aplicables de la garantía así como

información adicional sobre la Garantía

limitada de MUSIC group, consulte

online toda la información en la web

music-group.com/warranty.

Page is loading ...

TCS52C-T-WH/TCS32C-T-WH Quick Start Guide

᧙᜷ᄋ߸Мᮍᅽ

ࣝధ൦ಗ঄ᄋጽቬ᝻ܭЧధृ

ܹᄋႄุߜڛᝐႄԁᬘǎ̪ᬎ

Ώၺࣝధ ¼" TSੌ੶ᩛऱତ݁

ᄋᰵַ᠐˅ˋੵܧ٩ጴǎ੟ధᄋ߸ᜊੌួ

஠ڪᮍႁՍಬᄋ˅ˋ̢ցᤊᛢǎ

൦ಗ঄ଣᧉ১ַ̘аߜڛఴ

ፑᎇᄋԁᬘႄԎధᝐႄԁᬘǎ

൦ಗ঄ଣᧉ১ಋ᫟੟ᬅᄋ᧙᜷

ᄋΏၺԤ፦οឮ௛ǎឱ᫟឵ధ

У੥гǎ

࠶ॸ

˟ᥙГᝐႄԁᬘឱӉ੫ऩ఼

ᮈᄧੌᑁ᭨૖ౝǎ᝻ܭа෦

ధԼΚၺਜ਼፦οΏၺᄋᦋ͉ǎឱ࠳፦ο̄

ᮋ̕ႁՍಬᄋ˅ˋ̢ցᤊᛢǎ

࠶ॸ

˟ᥙГᅍ༣ੌᝐႄԁᬘឱӉ

࠳൦᝻ܭᎷ̇ᭂ๹ੌ໾ິ˘ǎ

൦᝻ܭ˸ˁԼԫ๰͵໠ຶᄪధ๰͵ᄋࠕ

٩˸ˁԼᎷ̇Цʾݡᔊၬ኏ǎ

࠶ॸ

፦οឮ௛̪௨ፍՍಬᄋ˅ˋ፦

ο̢ցΏၺᄋǎ˟ᥙГᝐႄԁ

ᬘᬕ́Ώၺឮ௛˻ଣ҃ᄋ̀ܲឱӉᤊᛢ

͋ͶЦ߳፦οǎ੟ధ፦οڪᮍႁՍಬᄋ˅

ˋ̢ցᤊᛢǎ

1. ឱ᫟឵ᤉ̐ឮ௛ǎ

2. ឱݱؔεߜᤉ̐ឮ௛ǎ

3. ឱญਔ੟ధᄋ᝞ᇩǎ

4. ឱᥗ߷੟ధᄋឮ௛ǎ

5. ឱӉڛ᭦ᤄබᄋڢஶΏၺశַ̘ǎ

6. ឱၺࣱ࣌ຎพశַ̘ǎ

7. ឱӉ܅܌ᤱ᮴Աǎ߸ᜊశַ̘௒ឱᥗ

ཱིԉࠓᄋឮ௛ǎ

8. ឱӉ࠳శַ̘߸ᜊڛམ຺ᬅᤄ

ݡ఍ජྠ༰ߖੌЦ̘߳ၸམ᧛ᄋ᝻ܭ

Ӌ઻ҫ஋٩ǎ

9. ឱӉሩᬕ౞মତ݁ੌ଍ڢତ݁ᄋ߸М

ᜊᎷǎ଍ڢତ݁௨ႁˑ˕ତ܌଍གྷԤʸ˕

଍ڢ݁౟ੈǎᔫᬥ᠏ଣΚᄋତ݁ˁᤡՍ১

ᄋତऑឱ੾ႄࢻట૲ʸ˕Սᤡᄋତऑǎ

10. ݱؔεઑႄ຺ጴΏЦˁᜃ᡼ᢇੌ҉

ᆢࡀЦญਔႄ຺ତ݁Ǎܴၺ᤮ତऑԤ᝻ܭ

ᤍ଍ܬǎ

11. ឱԷΏၺԉࠓ૊ࠁᄋᬅ࡜᝻ܭ֘ᦢ͉ǎ

12. ឱԷΏၺԉࠓ

૊ࠁᄋੌᬥ᠏ᩚ

׭ᄋ੥ଏᢽ౷ߖ

ʽᝉ౷஄౷֘ಹ

ߖǎᔫΏၺ੥ଏᢽ

౐ୄᤃ᝻ܭឱญ

ਔ߸М஋Ꮇ᝻ܭ

̀ᥙГ੥ଏᢽ֘᝻

ܭϛωᏬԫ͟ǎ

13. ᥆᫆ႄᭈᲟੌ᫃ఱˁΏၺశ᝻ܭ௒

ឱફѤႄ຺ତ݁ǎ

14. ੟ధ፦οڪᮍႁՍಬᄋ፦ο̢ցᤊ

ᛢǎ᝻ܭԫ૰௒ᭋᤊᛢ፦οΔݡႄ຺ጴੌ

ႄ຺ତ݁ԫ૰๰͵ุЛੌफྮᗁЛ᝻ܭ

а᝻ܭᥔᭂ๹ੌԫ໾᝻ܭˁᑠ൥ࣣᤃͼ

ੌᜃ୒گǎ

15. శ᝻ܭᤍ଍ႄ຺௒ʸࠁ᜷ధ଍ڢ

εઑǎ

16. ᔫႄ຺ତ݁ੌ٩Ч

ᏺՍ٩ၺͼளႄᜊᎷ

अैε᝾߳̈́ܬ̇ᬥ௒Լ

ஶΨ୳ͼ࿅ঘǎ

17. శַ̘̪ᤡၺ̇๓ફ

2000ዜ̀ʿڢӞశַ̘

̪ᤡၺ̇᭥མࣝජό౏

͉ʿǎ

ฃ०ܧ௛

ࠬ̇͋Ͷڃڛ൦ឮ௛˻ଣ҃ᄋМᦋ

ੌᦋ͌ଢᤙǍڐྠੌܧ௛Ꮼᤶੈᄋ૰

݀MUSIC Groupˁ᠈͋Ͷ᠋͋ǎ

઀సԡஞ֘ܲ᜻ᔫధటஉিˁԴᛢ

ᤱᅽǎ੟ధᄋ׹ಗڪ˟ЦՋᒮ੟ధᏩ

ᄋ᠊̘ǎMIDASKLARK TEKNIK

TURBOSOUNDBEHRINGERBUGERA

֘DDA௨MUSIC Group IP Ltd.ОՄᄋ

׹ಗੌญг׹ಗǎ© MUSIC Group IP

Ltd. 2014ྡీ੟ధǎ

εο౏൝

ధУᮄˮᬸڅεοᄋᤡၺ౏

൝ԤЦ߳ᄲУθ্ឱᄇᬇ

music-group.com/warranty

Ꭻቤಋᄻߺ஠ᄋឡጻθ্ǎ

Models covered by this

Quickstart Guide

TCS32C-T-WH, TCS52C-T-WH ceiling speakers.

Thank you for choosing a TURBOSOUND

loudspeaker product for your application. If you

would like further information about this or any

other TURBOSOUND product, please contact us.

Tap selector

Terminal cover plate

Strain relief fitting

Input connector

Rotating mounting tabs

Tweete r

Tweeter

LF loudspeaker

Attachment screws

Steel fire can

Attachment screws

TCS32C-T-WH

TCS52C-T-WH

Unpacking the TCS series loudspeaker

After unpacking the unit please check carefully for

damage. If damage is found, please notify your

supplier at once. You, the consignee, must instigate

any claim. Please retain all packaging in case of

future re-shipment.

System Requirements

TCS-C series ceiling loudspeakers are passive

loudspeaker systems, and require only one ampliﬁ er

channel for correct operation, the frequency

splitting between the LF driver and the HF driver

being accomplished by the internal passive

crossover network.

Using Ceiling Loudspeakers

with Subwoofers

If subwoofers are required, additional ampliﬁ er

channels and external electronic crossovers will

be required. The TURBOSOUND LMS series digital

management systems are recommended for

this purpose.

TCS52C-T-WH/TCS32C-T-WH Quick Start Guide

Ampliﬁ er Considerations

TURBOSOUND ceiling speakers should be driven

by high-quality power ampliﬁ ers designed for true

professional use. Ampliﬁ ers should be capable of

delivering long-term broadband power equal to half

the loudspeaker

’

s peak power rating at the stated

nominal impedance. Always operate your power

ampliﬁ ers at maximum gain for the best headroom

and signal/noise ratio, controlling the overall

system volume from the mixing console. The use

of under-powered ampliﬁ ers must be avoided

as heavily clipped signals can cause permanent

loudspeaker damage.

In a distributed system, the ampliﬁ ers must

be capable of supplying broadband power

equivalent to the sum of the power rating of the

loudspeakers (taking into account the individual

power taps selected) connected to that particular

ampliﬁ er channel.

Installation Procedure

1. Cut a hole in the ceiling tile using a circular cutter

set and pull the wiring through the hole.

TCS32C-T-WH cut-out diameter is 215 mm

TCS52C-T-WH cut-out diameter is 240 mm

2. Connect the wiring to the

removable connector.

A 4-way Phoenix-style

connector is supplied with

the loudspeaker. Strip the

insulation back by 5 mm

(3/16"), insert the bare

ends of the wire into the

connector (do not tin the

wire) and screw down the hold-down screw with a

small ﬂ at blade screwdriver.

4. The mounting hardware consists of two tile rails

and a ‘C’ plate (these are supplied with the

TCS32C-T-WH and TCS52C-T-WH). Insert the tile

rails through the hole in the ceiling tile and align

them parallel to each other on either side of the

hole, and with the ends positioned over the ceiling

T grid. Insert the ‘C’ plate through the hole and

snap the tabs onto the tile rails as shown.

Position directly over the hole in the ceiling tile and

secure with the ﬁ xing screws supplied. Note that

the provision of multiple ﬁ xing holes in the tile

rails allows the speaker to be positioned away

from the centre of the tile if desired.

5. Plug the connector into the socket in the

loudspeaker’s terminal cup. The connector

is polarised to avoid the possibility of

mis-connection. The terminal cover also acts

as the strain relief. Rotate the cover and tighten

the retaining screw.

6. Connect the safety tab to a separate support point.

Consult construction codes in your region.

7. Insert the speaker into the ceiling and secure the

ﬁ xing arms. Offer the loudspeaker into the ceiling

until the back of the front bafﬂ e rim touches

the ceiling tile. Turn the attachment screws to

tighten the ﬁ xing arms. Note that the ﬁ rst

turn

rotates the arm outwards and subsequent

turns tighten the tab down onto the ceiling tile.

DO NOT OVERTIGHTEN.

8. Adjust the voltage tap selector for desired level.

The selector is located on the front bafﬂ e,

and should be adjusted before ﬁ tting the grille.

In some installations it may be preferable to leave

grilles off until ﬁ nal adjustment of the tap selectors

has been completed for all loudspeakers.

9. Apply the logo badge to the grille in the desired

location if required, and ﬁ t the loudspeaker grille

by pressing the grille ﬁ rmly into place until it

is ﬂ ush with the rim. Remove the logo badge

from the grille if desired or if the speaker is to

be painted.

3.75

7.5

TCS52C-T-WH TCS32C-T-WH

3. There are two possible connection strategies, depending on the desired circuit result when a single unit is

disconnected for trouble shooting or servicing:

Parallel Input Terminals. This allows the circuit to remain intact whenever a speaker is disconnected.

Connect the outgoing pair of wires to the same terminals as the incoming pair of wires.

Loop-through Terminals. All loudspeakers after this unit will be disconnected, helping to isolate

problems to a section of the distributed line while leaving the wires connected to the connector.

Power Amplifier

+ -

Speaker 1 Speaker 2 Speaker 3

Inp

Link

- -

Input

Link

+ --

Input

Link

+ --

Input

Link

Power Amplifier

- -

Inp

Link

+ -

Speaker 1 Speaker 2 Speaker 3

- -

Input

Link

+ --

Input

Link

+ --

Input

Link

TCS52C-T-WH/TCS32C-T-WH Quick Start Guide

Technical Speciﬁ cations

Painting before Installation

The loudspeaker’s white ﬁ nish matches most décor

schemes and does not need further ﬁ nishing.

However where interior design requires an

alternative colour this can be easily accomplished.

The loudspeaker can either be painted before

installation, or where the rim needs to be ﬁ nished at

the same time as the ceiling the rim can be painted

after locating in the ceiling. The speaker will accept

almost any type of emulsion or oil-based paint.

Two coats are recommended.

Clean the rim and grille with a light solvent such

as white spirit. Do not use gasoline, kerosene,

acetone, MEK, paint thinner, harsh detergents or

other chemicals, all of which may damage the

loudspeaker. After cleaning, apply two coats of

paint, using a roller or brush, or by spraying.

Painting the Speaker with the Ceiling

Using the paint shield provided, paint the speaker

and remove the shield. To paint the grille,

ﬁ rst remove the logo and grille cloth backing.

It is advisable to spray the grille to avoid the mesh

becoming clogged with paint from a roller or brush,

which may impair the sound quality. Replace the

grille cloth and the logo.

Other important information

1. Register online. Please register your

new MUSIC Group equipment right after

you purchase it by visiting turbosound. com.

Registering your purchase using our

simple online form helps us to process your

repair claims more quickly and efﬁ ciently.

Also, read the terms and conditions of our

warranty, if applicable.

2. Malfunction. Should your MUSIC Group

Authorized Reseller not be located in your

vicinity, you may contact the MUSIC Group

Authorized Fulﬁ ller for your country listed

under “Support” at turbosound. com.

Should your country not be listed, please

check if your problem can be dealt with by

our “Online Support” which may also be

found under “Support” at turbosound. com.

Alternatively, please submit an online warranty

claim at turbosound. com BEFORE returning

the product.

3. Power Connections. Before plugging

the unit into a power socket, please make

sure you are using the correct mains voltage

for your particular model. Faulty fuses must

be replaced with fuses of the same type and

rating without exception.

Important information

TCS32C-T-WH TCS52C-T-WH

System

Frequency response

120 Hz – 20 kHz ±3 dB

100 Hz – 20 kHz -10 dB

90 Hz – 20 kHz ±3 dB

75 Hz – 20 kHz -10 dB

Nominal dispersion

150° conical @ -6 dB point 110° conical @ -6 dB point

Power handling (IEC)

Passive 30 W continuous, 120 W peak 60 W continuous, 240 W peak

100 V line 30, 15, 7.5 W continuous 60, 30, 15 W continuous

70 V line 30, 15, 7.5, 3.75 W continuous 60, 30, 15, 7.5 W continuous

Sensitivity

87 dB (1 W @ 1 m) 92 dB (1 W @ 1 m)

Maximum SPL

Passive 102 dB continuous, 108 dB peak 110 dB continuous, 116 dB peak

100 V line 108, 105, 102 dB peak 116, 113, 110 dB peak

70 V line 108, 105, 102, 99 dB peak 116, 113, 110, 107 dB peak

Impedance

16 Ω 16 Ω

Crossover type

Passive Passive

Components

1 x 3.5" (89 mm) LF driver

1 x 1" (25 mm) HF driver

1 x 5" (127 mm) LF driver

1 x 1" (25 mm) HF driver

Enclosure

Connectors

1 x Phoenix 1 x Phoenix

Wiring

Input 1+ / 1-, link 2+ / 2- Input 1+ / 1-, link 2+ / 2-

Dimensions (dia, depth)

235 x 83 mm (9.3 x 3.3") 268 x 188 mm (10.6 x 7.4")

Hole cut-out dia.

215 mm (8.5") 240 mm (9.4")

Minimum mount depth

110 mm (4.3") 210 mm (8.3")

Net weight

2.4 kg (5.3 lbs) 3.4 kg (7.5 lbs)

Construction

UL-V0 ABS, steel ﬁ re can UL-V0 ABS, steel ﬁ re can

Finish

White, paintable White, paintable

Grille

Powder-coated perforated steel Powder-coated perforated steel

Attachment

Rotating screw clamps Rotating screw clamps

Accessories

C-Ring and tile bridge – included C-Ring and tile bridge – included

Page is loading ...

Turbosound TCS52C-T-WH Quick start guide

Brand: Turbosound

Model: TCS52C-T-WH

Category: Loudspeakers

Type: Quick start guide

This manual is also suitable for

TCS32C-T-WH

Download PDF

report

in other languages

français: Turbosound TCS52C-T-WH Guide de démarrage rapide
español: Turbosound TCS52C-T-WH Guía de inicio rápido
Deutsch: Turbosound TCS52C-T-WH Schnellstartanleitung
português: Turbosound TCS52C-T-WH Guia rápido
日本語: Turbosound TCS52C-T-WH クイックスタートガイド

Turbosound TCS52C-T-WH Quick start guide

This manual is also suitable for

Turbosound TCS52C-T-WH Quick start guide

in other languages

Related papers

Other documents