ASROCK FM2A88X PRO3+ Installation guide

Brand: ASROCK

Model: FM2A88X PRO3+

Category: Motherboards

Type: Installation guide

FM2A88X Pro3+FM2A88X Pro3+

Version 1.0

Published August 2014

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

Contents
Introduction  1
1  Package Contents  1
  
3  Motherboard Layout  6
4  I/O Panel  8
Installation  9
1  CPU Installation  10
2  Installation of CPU Fan and Heatsink  11
3  Installation of Memory Modules (DIMM)  12
4  Expansion Slots (PCI and PCI Express Slots)  14
5  Jumpers Setup  15
6  Onboard Headers and Connectors  16
7  CrossFireX
TM
 and Quad CrossFireX
TM
 Operation Guide  21
8  AMD Dual Graphics Operation Guide  24
Software and Utilities Operation  26
1  Installing Drivers  26
2  A-Tuning  27
3  ASRock APP Shop  33
4  Start8  39
UEFI SETUP UTILITY  42
1  Introduction  42
1.1 UEFI Menu Bar  42

4.1.2 Navigation Keys  43
4.2  Main Screen  43
4.3  OC Tweaker Screen  44
4.4  Advanced Screen  47
 
 
 
 
  
 
 
4.5  Tool  56
4.6  Hardware Health Event Monitoring Screen  59
4.7  Boot Screen  60
4.8  Security Screen  62
4.9  Exit Screen  63

English

FM2A88X Pro3+

1. Introduction

Thank you for purchasing ASRock FM2A88X Pro3+ motherboard, a reliable moth-

erboard produced under ASRock’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRock’s commitment to

quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the motherboard

and step-by-step installation guides. Chapter 3 contains the operation guide of the



       

be updated, the content of this manual will be subject to change without

 -

sion will be available on ASRock website without further notice. You may

        

well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit



www.asrock.com/support/index.asp

1.1 Package Contents

ASRock FM2A88X Pro3+ Motherboard (ATX Form Factor)

ASRock FM2A88X Pro3+ Quick Installation Guide

ASRock FM2A88X Pro3+ Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

English



Platform

 ATX Form Factor

 All Solid Capacitor design

 High Density Glass Fabric PCB

CPU

 Supports Socket FM2+ 95W / FM2 100W processors

 4 + 2 Power Phase design

Chipset

 AMD A88X (Bolton-D4)

Memory

 Dual Channel DDR3 Memory Technology

 4 x DDR3 DIMM Slots

 Supports DDR3 2400+(OC)/2133/1866/1600/1333/1066

non-ECC, un-buffered memory (see CAUTION 1)

 Max. capacity of system memory: 64GB (see CAUTION

 Supports Intel



 

to AMP 2400

Expan-

sion

Slot

 1 x PCI Express 3.0 x16 Slot (PCIE4 @ x16 mode)

* PCIE 3.0 is only supported with FM2+ CPU. With FM2

CPU, it only supports PCIE 2.0.

 1 x PCI Express 2.0 x16 Slot (PCIE5 @ x4 mode)

 3 x PCI Express 2.0 x1 Slots

 2 x PCI Slots

 Supports AMD Quad CrossFireX

, CrossFireX

and

Dual Graphics

Graphics

 Integrated AMD Radeon

R7/R5 Series Graphics in

A-series APU

 DirectX 11.1, Pixel Shader 5.0 with FM2+ CPU. DirectX

11, Pixel Shader 5.0 with FM2 CPU.

 Max. shared memory 2GB

 

independent display controllers

 

2560x1600 @ 60Hz

English

FM2A88X Pro3+

 Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

 

2.0: New video post

processing capability for automatic jitter reduction on

home/online video

 

 Supports Full HD 1080p Blu-ray (BD) playback with



Audio

 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

 Supports Surge Protection (ASRock Full Spike Protec-

tion)

LAN

 PCIE x1 Gigabit LAN 10/100/1000 Mb/s

 Realtek RT L8111GR

 Supports Wake-On-WAN (see CAUTION 3)

 Supports Wake-On-LAN

 Supports Lightning/ESD Protection (ASRock Full Spike

Protection)

 Supports LAN Cable Detection

 

 Supports PXE

Rear

Panel I/O

 1 x PS/2 Mouse Port

 1 x PS/2 Keyboard Port

 1 x D-Sub Port

 

 4 x USB 2.0 Ports (Supports ESD Protection (ASRock

Full Spike Protection))

 2 x USB 3.0 Ports (AMD A88X (Bolton-D4))

(Supports ESD Protection (ASRock Full Spike

Protection))

 1 x RJ-45 LAN Port with LED (ACT/LINK LED and

SPEED LED)

 HD Audio Jacks: Line in / Front Speaker / Microphone

Storage

 8 x SATA3 6.0 Gb/s Connectors, support RAID (RAID

0, RAID 1, RAID 5 and RAID 10), NCQ, AHCI and Hot

Plug

English

Connec-

tor

 1 x COM Port Header

 1 x Power LED Header

 2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)

 3 x Chassis Fan Connectors (1 x 4-pin, 2 x 3-pin)

 1 x Power Fan Connector (3-pin)

 1 x 24 pin ATX Power Connector

 

 1 x PCIe Power Connector

 1 x Front Panel Audio Connector

 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)

(Supports ESD Protection (ASRock Full Spike Protec-

tion))

 1 x USB 3.0 Header by AMD A88X (Bolton-D4) (Sup-

ports 2 USB 3.0 ports) (Supports ESD Protection (AS-

Rock Full Spike Protection))

BIOS

Feature

 64Mb AMI UEFI Legal BIOS with GUI support

 Supports “Plug and Play”

 ACPI 1.1 Compliant wake up events

 Supports jumperfree

 SMBIOS 2.3.1 support

 

Hardware

Monitor

 CPU temperature sensing

 Chassis temperature sensing

 CPU Fan Tachometer

 Chassis Fan Tachometer

 CPU/Chassis Quiet Fan

 CPU/Chassis Fan multi-speed control

 

 Microsoft

Windows

8.1 32-bit / 8.1 64-bit / 8 32-bit / 8

64-bit / 7 32-bit / 7 64-bit

-

tions

 FCC, CE, WHQL

 ErP/EuP ready (ErP/EuP ready power supply is

required)

English

FM2A88X Pro3+

WARNING

Please realize that there is a certain risk involved with overclocking,

including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may

affect your system’s stability, or even cause damage to the components

and devices of your system. It should be done at your own risk and

expense. We are not responsible for possible damage caused by

overclocking.

* For detailed product information, please visit our website: http://www.asrock.com

CAUTION!

1. Whether 2400/2133/1866/1600MHz memory speed is support-

ed depends on the CPU you adopt. If you want to adopt DDR3

2400/2133/1866/1600 memory module on this motherboard,

please refer to the memory support list on our website for the

compatible memory modules.

ASRock website http://www.asrock.com

2. Due to the operating system limitation, the actual memory size

may be less than 4GB for the reservation for system usage

under Windows

8.1 / 8 / 7. For Windows

64-bit OS with 64-

bit CPU, there is no such limitation. You can use ASRock XFast

RAM to utilize the memory that Windows

cannot use.

3. Wake-On-WAN allows you to wake up this system from remote

mobile devices, such as smart phones, tables, or other PCs.

It needs third-party softwares and applications to utilize this

feature.

English

1.3 Motherboard Layout

SOCKET FM2b

Supe r

I/O

CMOS

BATTERY

PCIE1

LAN

AUDIO

CODEC

CPU_FAN1

CPU_FAN2

64Mb

BIOS

FM2A88X Pro3+

PCIE4

PCIE2

PCI1

PCI2

CLRCMOS1

HDLED RESET

PLED PWRBTN

PANEL1

SPEAKER1

PLED1

HD_AUDIO1

COM1

USB6_7

USB8_9

Top:

LINE I N

Cent er :

FRON T

Bott om :

MIC IN

RoHS

PS2

Mouse

PS2

Keyboard

USB 3.0

T: USB2

B: USB3

RJ-45 LAN

USB 2.0

T: USB4

B: USB5

CHA_FAN1

PCIE3

PCI Express 3.0

USB 2.0

T: USB0

B: USB1

ATX 12V1

DDR3_A1 (64 bit, 240-pin module)

DDR3_A2 (64 bit, 240-pin module)

DDR3_B1 (64 bit, 240-pin module)

DDR3_B2 (64 bit, 240-pin module)

ATXPWR1

CHA_FAN2

CHA_FAN3

PWR_FAN1

SATA_ 1_ 2

SATA_ 3_ 4

SATA_ 5_ 6

1314151617181920

PCIE5

AMD

A88X

(Bolton-D4)

Chipset

SATA_ 7_ 8

USB3_2_3

PCIE_PWR1

VGA1

DVI1

English

FM2A88X Pro3+

No. Description

1 

2 CPU Fan Connector (CPU_FAN1)

3 CPU Fan Connector (CPU_FAN2)

4 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)

5 2 x 240-pin DDR3 DIMM Slots (DDR3_A2, DDR3_B2)

6 ATX Power Connector (ATXPWR1)

7 USB 3.0 Header (USB3_2_3)

8 Chassis Fan Connector (CHA_FAN2)

9 SATA3 Connectors (SATA _7_ 8)

10 SATA3 Connectors (SATA _ 5 _ 6)

11 SATA3 Connectors (SATA _ 3 _ 4)

12 SATA3 Connectors (SATA _1_ 2)

13 System Panel Header (PANEL1)

14 Clear CMOS Jumper (CLRCMOS1)

15 Chassis Fan Connector (CHA_FAN3)

16 Power LED Header (PLED1)

17 Chassis Speaker Header (SPEAKER1)

18 USB 2.0 Header (USB8_9)

19 USB 2.0 Header (USB6_7)

20 COM Port Header (COM1)

21 Front Panel Audio Header (HD_AUDIO1)

22 Power Fan Connector (PWR_FAN1)

23 Chassis Fan Connector (CHA_FAN1)

24 PCIe Power Connector (PCIE_PWR1)

English

1.4 I/O Panel

No. Description No. Description

1 PS/2 Mouse Port (Green) 7 USB 3.0 Ports (USB23)

2 LAN RJ-45 Port* 8 

3 Line In (Light Blue) 9 

4 Front Speaker (Lime) 10 USB 2.0 Ports (USB01)

5 Microphone (Pink) 11 PS/2 Keyboard Port (Purple)

6 USB 2.0 Ports (USB45)

* There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED

indications.

Activity / Link LED Speed LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

1 2 4

567891011

English

FM2A88X Pro3+

2. Installation

This is an ATX form factor motherboard. Before you install the motherboard, study



Pre-installation Precautions

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static elec-



like. Also remember to use a grounded wrist strap or touch a safety

grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the mother-

board to the chassis, please do not over-tighten the screws! Doing

so may damage the motherboard.

English

2.1 CPU Installation

Step 1. Unlock the socket by lifting the lever up

to a 90

angle.

Step 2. Position the CPU directly above the

socket such that the CPU corner with

the golden triangle matches the socket

corner with a small triangle.

Step 3. Carefully insert the CPU into the

 



orientation. DO NOT force the CPU

into the socket to avoid bending of

the pins.

Step 4. When the CPU is in place, press it

   

down the socket lever to secure the

CPU. The lever clicks on the side tab

to indicate that it is locked.

English

FM2A88X Pro3+

2.2 Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a

larger heatsink and cooling fan to dissipate heat. You also need to spray

thermal grease between the CPU and the heatsink to improve heat dis-

sipation. Make sure that the CPU and the heatsink are securely fastened

and in good contact with each other. Then connect the CPU fan to the

CPU FAN connector (CPU_FAN1 and CPU_FAN2, see Page 6, No. 2

and No. 3). For proper installation, please kindly refer to the instruction

manuals of the CPU fan and the heatsink.

English

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM

slots, and supports Dual Channel Memory Technology.



-



incorrect orientation.

Priority DDR3_ A1 DDR3_A2 DDR3_B1 DDR3_B2

1 Populated Populated

2 Populated Populated

3 Populated Populated Populated Populated













-



slots.

English

FM2A88X Pro3+

English

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 5 PCI Express slots on this motherboard.

PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE Slots:

PCIE1 / PCIE2 / PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express cards

with x1 lane width cards

PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width

graphics cards

PCIE5 (PCIe 2.0 x16 slot) is used for PCI Express x4 lane width cards



-







-





PCIE4 PCIE5

Single Graphics Card x16 N/A

Two Graphics Cards in

CrossFireX

Mode

x16 x4

English

FM2A88X Pro3+

2.5 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on pins, the jumper is “Open”. The

illustration shows a 3-pin jumper whose

pin1 and pin2 are “Short” when jumper cap

is placed on these 2 pins.

Jumper Setting Description

Clear CMOS Jumper

(CLRCMOS1)

(see p.6, No. 14)

Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the

system parameters to default setup, please turn off the computer and unplug

the power cord from the power supply. After waiting for 15 seconds, use a

jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However,

please do not clear the CMOS right after you update the BIOS. If you need

             

-



GUID and MAC address will be cleared only if the CMOS battery is removed.

Clear CMOSDefault

English

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

USB 2.0 Headers Besides four default USB 2.0

(9-pin USB6_7)

ports on the I/O panel, there

(see p.6 No. 19)

are two USB 2.0 headers on

(9-pin USB8_9)

this motherboard. Each USB 2.0

(see p.6 No. 18)

header can support two USB

2.0 ports.

Serial ATA3 Connectors These eight Serial ATA3

(SATA_1_2: see p.6, No. 12)

(SATA3) connectors support

(SATA_3_4: see p.6, No. 11)

SATA data cables for internal

(SATA_5_6: see p.6, No. 10)

storage devices. The current

(SATA_7_8: see p.6, No. 9)

SATA3 interface allows up to

6.0 Gb/s data transfer rate.

DUMMY

GND

P+

P-

USB_PWR

P+

P-

USB_PWR

SATA_5_6 SATA_7_8SATA_3_4SATA_1_2

USB 3.0 Header Besides two default USB 3.0

(19-pin USB3_2_3)

ports on the I/O panel, there is

(see p.6 No. 7)

one USB 3.0 header on this

motherboard. This USB 3.0

header can support two USB 3.0

ports.

IntA_PB_D+

Dummy

IntA_PB_D-

GND

IntA_PB_SSTX+

GND

IntA_PB_SSTX-

IntA_PB_SSRX+

IntA_PB_SSRX-

Vbus

IntA_PA_SSRX-

IntA_P

A_SSRX+

GND

IntA_PA_SSTX-

IntA_PA_SSTX+

GND

IntA_PA_D-

IntA_PA_D+

Page is loading ...

ASROCK FM2A88X PRO3+ Installation guide

Brand: ASROCK

Model: FM2A88X PRO3+

Category: Motherboards

Type: Installation guide

Download PDF

report

ASROCK FM2A88X PRO3+ Installation guide

ASROCK FM2A88X PRO3+ Installation guide

Related papers

Other documents