Voxx PE1M2LEDZ User manual

Brand: Voxx

Model: PE1M2LEDZ

Category: Remote starters

Type: User manual

This manual is also suitable for

PE2LEDZ

Owner’s Guide

For Models:

PE2LEDZ

PE1M2ECDZ

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

APSRS

RF Upgrade Kit

2 APSRS LEDZ Owners revA

Table of Contents

Using Your Remote Control .................................................................... 3

Locking the Vehicle Doors .................................................................3

Arming the Security System .............................................................. 3

Unlocking the Vehicle Doors .............................................................3

Disarming the Security System ......................................................... 3

Two Stage Door Unlock (optional) .....................................................3

Activating Trunk Release (optional) ...................................................3

Activating AUX Output (optional) .......................................................3

Using the Personal Protection Alarm .................................................4

User Selectable Notication Chirps ................................................... 4

User Selectable LED ......................................................................... 4

Programmed Transmitter Notication ................................................4

Valet Mode ........................................................................................5

Manually Overriding the Security System ......................................... 5

Using Your Remote Vehicle Starter ....................................................... 6

Remote Starting Your Vehicle ............................................................ 6

Remote Start Shutdown .................................................................... 6

Entering Your Vehicle while it is Running via Remote Start .............. 6

Preheating or Precooling the Vehicle’s Interior ................................. 6

Remote Start Safety Features ........................................................... 6

Remote Start Ready Mode ................................................................ 7

Enter & Exiting the Vehicle - Remote Start Ready Mode .................. 7

Cancelling Remote Start Ready Mode .............................................. 8

Using the “Quick-Stop” Feature ......................................................... 8

Turbo Timer Mode (optional) ............................................................. 9

Operating the 2 / 4 Hour Start Up Timer Mode .................................. 9

Status LED, Light Flashes and Siren/Horn Indications ..................... 10

Replacing Remote Control Batteries ................................................... 12

Warranty Information ............................................................................ 13

Arming the Security System (Optional)

To arm the system, exit the vehicle, close all doors, then press the button. The

parking lights will ash 1 time indicating the system is armed, has locked the doors (if

equipped and connected) and activated the starter disable feature. The LED status

indicator will blink steadily, once per second.

NOTE: Ths feature requires additional programming and installation. Contact your

dealer for more information

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more

than 3 seconds.

Using Your Remote Control

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button one time will unlock

only the driver’s door. Press again within three seconds to unlock the remaining

doors.

Disarming the Security System

To disarm the system press the button. The parking lights will ash 1 time, indicating

the system is disarmed and has unlocked the doors (if equipped and connected).

NOTE: Ths feature requires additional programming and installation. Contact your

dealer for more information.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the button for 3

seconds will open the vehicle’s trunk or hatch.

Door Lock

To lock the vehicle doors press and release the button.

NOTE: The system is equipped with a feature called Silent Choice. If enabled, the

system requires a second press of the button to activate an audible arming response

from the vehicle.

Door Unlock

To unlock the vehicle doors press and release the button.

NOTE: The system is equipped with a feature called Silent Choice. If enabled, the

system requires a second press of the button to activate an audible arming response

from the vehicle.

4 APSRS LEDZ Owners revA

Programmed Transmitter Notication

As a security precaution each time the vehicle’s ignition is turn on the status LED

light with ash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

User Selectable Notication Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

User Selectable LED

This feature will control whether the LED is ON or OFF when the system is Armed/

Locked and can be toggled ON or OFF without entering the programming feature

banks.

1. Turn the ignition ON, OFF, ON, OFF.

2. Press and hold the valet/programming button for 5 seconds. The system

LED will respond with 1 ash for ON or 2 ashes for OFF.

Activating the AUX Ch. 4-7 Output (Optional)

AUX channel output is an optional feature and programming is required at the time of

installation. Please consult your dealer for more information.

Using the Personal Protection Alarm (Panic)

Press and hold the or button for 3 seconds to activate the personal protection

alarm. During panic mode, the normal function of the transmitter buttons will be

suspended. The transmitter’s and buttons can be used to lock and unlock the door

(if the option is installed). To stop the alarm, press and hold the or button on the

transmitter again for 3 seconds. The system will automatically stop after 30 seconds.

Valet Mode (Optional)

When valet mode is activated the status LED will light solid, and all security and

remote start functions will be disabled. To enter or exit valet mode simply follow the

steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Manually Overriding the Security System

Your system can be disarmed without the use of the transmitter. This is necessary to

operate your vehicle if the transmitter is lost or its battery fails. To by-pass the alarm

system;

1. Open the vehicle door. The alarm will sound.

2. Turn the ignition key to the ON position.

3. Within 10 seconds, press and release the valet push button switch.

The alarm system will stop sounding and enter the (by-passed) mode. You can now

start and operate the vehicle normally.

6 APSRS LEDZ Owners revA

Using Your Remote Starter

Remote Starting Your Vehicle

To activate the remote start function, press and release the button 2 times within

2 seconds. The system will sound, the parking lights will ash 1 time and the system

will check the vehicle to ensure it is safe to start. If all safety parameters are correct,

the vehicle will start. The vehicle’s parking lights will turn on (or ash depending on

system settings) as a visual indication that the vehicle has started and is running.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try

3 more times to start the vehicle (a total of 4 attempts). The system will pause 5

seconds between each start attempt.

Remote Start Shutdown

Press and release the button 2 times to turn the vehicle o.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN

position.

4. Press the brake pedal. The remote vehicle starter will disengage and

the vehicle will operate normally.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and

operation. After the system starts the vehicle, the heater or air conditioner will

activate and heat or cool the vehicle’s interior to your setting.

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote

vehicle starter from activating if any of the following occur:

1. The vehicle’s hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON

position.

3. The engine is over-revved (tach checking only).

4. Valet Mode is active. Refer to the Valet Mode section of this manual on

page 5.

5. Remote Start Ready Mode is not set. Manual transmission vehicle’s only.

To Enter & Exit the Vehicle while (Manual Transmission) Remote Start Ready

Mode is already active without cancelling Remote Start Ready Mode.

If ready mode has already been activated and you need to enter the vehicle, possibly

to retrieve an item, and will exit the vehicle without driving it, you can keep ready

mode active by following the steps below.

1. With Ready Mode already previously set, activate the remote start.

2. While under control of the remote start open vehicle door to retrieve

items.

3. Exit the vehicle and close all doors.

4. Press the button, the unit waits 3 seconds and then shuts down,

the system will verify all doors have been closed then will emit the 2

short/1 long tone and light ash pattern indicating Manual Transmission

Ready Mode is active.

Note: If the 2 short/1 long tone is not heard then Ready Mode has not been

set.

Remote Start Ready Mode - Manual Transmission Vehicles Only

To activate the remote start function, the system must rst be in Remote Start Ready

Mode. Follow the steps below to enter remote start ready mode.

1. While the engine is running by the ignition key;

a. Place the transmission in neutral.

b. Set the parking brake

2. With your foot o the brake pedal, press and release the button to

activate the remote start. The remote will beep 4 times and the parkinglights

will turn on to conrm the system has remote started.

3. Remove the keys from the ignition, the vehicle will remain running.

4. Exit the vehicle and close all vehicle doors.

5. Within 1 minute of step 1, press the button to lock the vehicle’s doors.

The vehicle will shutdown and sound 2 short chirps then 1 long chirp to conrm

ready mode is set.

Remote Start Ready Mode must be enabled if your vehicle is equipped with a

manual transmission.

8 APSRS LEDZ Owners revA

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle

secure and your keys with you.

To engage Quick Stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot o the brake pedal, press and release the button 2

times within 2 seconds. The LED will ash 3 times to conrm quick

stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired.

To engage Quick Stop - Manual Transmission Vehicles:

1. With the vehicle running, foot o the brake, parking brake set ON.

2. Press and release the button to activate remote start.

3. Exit the vehicle close all doors (Door Open/All Doors Close)

4. Press and release the button.

5. Within 3 seconds press the button:

The unit enters Quick Stop Mode and will remain running

until remote start time-out and then shut down. (Remote Start Ready

Mode is NOT active)

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only

The system will exit remote start ready mode if any of the following occur:

Open any door

Open the hood or trunk (if connected)

Press the brake

Release the parking brake

Turn the ignition ON

Operating the 2 / 4 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.

This feature is especially useful in cold climates where the only means to keep the

engine and engine uids warm is to periodically start the engine. The default setting

is 4 hours.

WARNING!

Be certain that the vehicle is outdoors before using this or any remote starting

device. A running engine produces dangerous carbon monoxide fumes which can be

harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is

garaged.

To begin the 2 / 4 hour start up timer mode:

1. Turn the vehicle’s ignition ON then OFF.

2. Press the button 4 times, the system will;

a. When set for 2 Hour (default) - chirp 2 times and ash the

parking lights 2 times.

b. When set for 4 Hour - chirp 4 time and ash the parking

lights 4 times.

To exit the 2 / 4 hour start up timer mode:

1. Turn the vehicle’s Ignition ON.

2. Press the vehicle’s brake pedal while the engine is running.

Turbo Timer (Optional)

This option will keep the engine running to allow the vehicle’s turbo to properly cool

down before shutting the engine o.

To engage the Turbo Timer feature:

1. With the vehicle running via the ignition key and your foot o of the

brake pedal.

2. Engage the vehicle’s parking brake.

3. The vehicle’s parking lights will turn on to verify the Turbo Timer

feature has been activated.

4. Turn the ignition key OFF, the vehicle will continue to run until the pre-

programmed time has elapsed (1, 3, or 5 minutes)

To disengage the turbo timer feature, press the vehicle’s brake pedal.

10 APSRS LEDZ Owners revA

Status LED, Light Flashes, and Siren/Horn Indications

Status LED Flash Indications

LED Flashes Function

OFF Unlocked / Disarmed

Slow Flash Locked / Armed

ON (Solid) Valet Mode

1 Flash / Disarmed Zone 1 Trigger, Shock Sensor

2 Flashes / Disarmed Zone 2 Trigger, Trunk / Hood

3 Flashes / Disarmed Zone 3 Trigger, Door

Siren/Horn Chirp Indications

Chirps Function

1 Lock / Arm

2 Unlock / Disarm

3 Door Ajar Upon Locking /Arming

4 Disarm / Triggered

Parking Light Flash Indications

Flashes Function

1 Lock / Arm

2 Unlock / Disarm

3 Disarm / Triggered

ON (Solid or Slow Flash) Remote Started

Remote Start Shutdown Diagnostics

Parking Light Flashes Shutdown Zone

1 Flash Runtime Expiried

2 Flashes Remote Shutdown

3 Flashes Brake ON

4 Flashes Manual Tramission Ready Mode

5 Flashes Hood Open

6 Flashes Low Tach Signal

7 Flashes Tach / Crank Average not learned

8 Flashes High Tach Signal

 2WayRemoteControlNotications

FUNCTION BEEPS / LED FLASHES

Lock 1 Beep / Flash

Unlock 2 Beeps / Flashes

Trunk Release 2 Beeps / Flashes

Remote Start Activation RS Activation Melody

Conrm Remote Start 4 Beeps / Flashes

Remote Start Running 1 Flash per 5 seconds for duration run time

Remote Start Shutdown RS Shutdown Melody

Car Find / Panic 2 Beeps / All LEDs Flash per 3 seconds -

Repeats 9 times

12 APSRS LEDZ Owners revA

Replacing Remote Control Batteries

5 Button Remote Control - Model 185SP

The CR2032 battery inside each remote control should last approximately 1 year under

normal use. When the batteries become weak you will notice the remote control range

(the distance from the vehicle the remote control will work) deteriorate and the small LED

on the remote control will dim. To replace the remote control batteries:

1. Using a coin, disassemble the halves of the remote

control.

2. Remove the old battery, observing the +/- symbols on the

batteries and replace with a new battery.

3. Reassemble the halves of the remote control

4. Test operation of the remote control.

5 Button Remote Control - Model 185TWSP / 18TWLOR

The CR2450 battery inside each remote control should last approximately 1 year under

normal use. When the batteries become weak you will notice the remote control range

(the distance from the vehicle the remote control will work) deteriorate and the small LED

on the remote control will dim. To replace the remote control batteries:

1. Using a coin, disassemble the halves of the remote

control.

2. Remove the old battery, observing the +/- symbols on the

batteries and replace with a new battery.

3. Reassemble the halves of the remote control

4. Test operation of the remote control.

LIMITED LIFETIME WARRANTY

Applies to Prestige Series Control Modules, Sirens, Sensors, and Relays.

Voxx Electronics Corporation (the Company) warrants to the original purchaser of this

product that should this product or any part thereof, (other than transmitters) under nor-

mal use and conditions, be proven defective in material or workmanship during the life-

time of the vehicle, in which it was originally installed from the date of original purchase

such defect(s) will be repaired or replaced with new or reconditioned product, (at the

Company’s option) without charge for parts or repair labor. A transmitter is warranted for

12 months from the date of original purchase.

To obtain repair or replacement within the terms of this Warranty, the product is to

be delivered with proof of warranty coverage (e.g. dated bill of sale), specication of

defect(s), transportation prepaid, to an approved warranty station. This Warranty is not

transferable.

This Warranty does not cover damage to the vehicle’s electrical system or costs

incurred for removal or reinstallation of the product. This Warranty does not cover bat-

teries, broken LCD or OLED display screens, nor apply to any product or part thereof

which, in the opinion of the Company, has suered or been damaged through alteration,

improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or

defacement of the factory serial number/bar code label(s).

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WAR-

RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL

BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. IN NO CASE

SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or rep-

resentative is authorized to assume for the Company any liability other than expressed

herein in connection with the sale of this product.

The company does not warrant that this product cannot be compromised or circum-

vented. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO

EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID

BY PURCHASER FOR THE PRODUCT WITHOUT COST OF INSTALLATION.

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above limitations or

exclusions may not apply to you. This Warranty gives you specic legal rights and you

may also have other rights which vary from state to state.

Voxx Electronics Corporation, 180 Marcus Blvd., Hauppauge, New York 11788 / 1-800-645-4994

14 APSRS LEDZ Owners revA

Voxx Electronics Corporation.

Customer Service 1-800-225-6074

WWW.VOXXELECTRONICS.COM

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of

Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that

may cause undesired operation.

Warning!

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

PATENTED: www.voxxintl.com/company/patents

Voxx PE1M2LEDZ User manual

Brand: Voxx

Model: PE1M2LEDZ

Category: Remote starters

Type: User manual

This manual is also suitable for

PE2LEDZ

Download PDF

report

Voxx PE1M2LEDZ User manual

This manual is also suitable for

Voxx PE1M2LEDZ User manual

Related papers

Other documents