LG VR5943L Owner's manual

Brand: LG

Model: VR5943L

Category: Robotic vacuum cleaners

Type: Owner's manual

The LG VR5943L is a robotic vacuum cleaner designed to make cleaning your home easier. With its advanced camera sensor, it can navigate around your home, avoiding obstacles and cleaning even hard-to-reach areas. It also features a powerful suction system that can pick up dirt, dust, and pet hair from all types of flooring. Additionally, the LG VR5943L has a variety of cleaning modes to choose from, so you can customize the cleaning to your specific needs.

Model

Language

Page

)H*W(eziSlairetaM

Designer

Confirm

Color(cover/body)

Part No

Date

etaD.oN

Chage Record

Change content

ECO No.

Weight 80g

2012.3.26

VR5942L

English

MFL67086051 Description

1/1

190×260(mm)

Ma Yongli

Owners Manual

OWNER’S MANUAL

CLEANING ROBOT

VR59**L

VR59**L*

Before using, please carefully read the Safety Precautions pages to

allow for safe operation of the product. After reading the operation

manual, please keep it in an easily accessible location.

www.lg.com

FEATURES

Images of the ﬂoor are obtained from the sensors of the lower camera, and

through this, the location of Roboking will be conﬁrmed, therefore, elaborate

cleaning can be accomplished for every part of the room.

As the height of the Roboking is low (90mm), even the underside of a framed

bed or furniture can be cleaned.

The Roboking also has voice conﬁrmation and instruction that can be easily

understood by the user.

The

Roboking

can clean all parts of the area by cleaning in zigzag mode and

then in spatial expansion mode.

As the noise levels are at a quiet 60dB, cleaning can be performed at night.

*Less than 60dB

Camera sensor

Please, check

the dust bin

CONTENTS

Safety Precautions

Included with Product

Parts Descriptions

Button Functions

Display Status Information

Before You Start

Overview

BEFORE USING

HOW TO USE

How to Install the Home Station

How to Turn the Power Supply On and Off.

How to Start and Stop Cleaning

How to Charge the Battery

Cleaning Modes

Auxiliary Cleaning Modes

6~7

8~9

16~17

1~4

26~28

ADDITIONAL INFORMATION

REFERENCE

Troubleshooting

Before You Call for Service

Product Speciﬁcations

CARE AND MAINTENANCE

Cleaning the Dust Bin

Cleaning the Dust Bin Filter

Cleaning the Brush

Cleaning the Sensor/Charging Terminal

Cleaning the Side Brush

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and correctly

to prevent any unexpected risk or damage.

Basic safety precautions

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in prop-

erty damage and/or serious bodily harm or death.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

WARNING

CAUTION

This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowl-

edge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do

not play with the appliance.

If the supply cord is damaged, it must be replaced by

LG Electronics Service Agent in order to avoid a hazard.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children shall

not play with the appliance. Cleaning and user mainte-

nance shall not be made by children without supervi-

sion.

For your safety, do not remove the battery

from the Roboking. If you need to replace the

battery or the Roboking, take it to the nearest

authorized LG Electronics service center or

dealer for assistance.

Make sure the power cord of the home sta-

tion is not crushed under a heavy object or

damaged by contact with sharp objects.

Never use the Roboking with a bat-

tery and/or home station from any

other product than the Roboking.

Failure to follow this warning can cause ﬁre or

product failure. If the power cord is broken,

replace it at an LG Electronics customer care

center.

Do not use the Roboking when

candles or fragile objects are placed

on the ﬂoor.

Doing so can cause ﬁre or product failure.

Failure to follow this warning can cause ﬁre

or product failure.

Doing so can cause ﬁre or product failure.

Do not place the home station and

the Roboking near a heating device.

Always use a dedicated outlet.

Doing so can cause product deformation,

ﬁre, or product failure.

If multiple appliances are connected to an

outlet simultaneously, they can generate

enough heat to cause a ﬁre.

Do not force the power plug to bend.

Do not use the power plug when it

has been damaged or loosened.

When pulling out the power plug, always

pull it out by grabbing the plug, not the

cord. When pulling out the power plug, do

not to touch the prongs with your ﬁngers.

Doing so can cause ﬁre or product failure.

Doing so can cause an electric

shock.

SAFETY PRECAUTIONS

Do not touch the power plug with

wet hands.

Do not use the Roboking while a

child or object is on it. Do not use the

Roboking while an object is hanging

from it.

Doing so can cause electric shock.

Doing so can cause injury or product dam-

age.

* 1) Place the cords from other appliances out of the area to be cleaned.

2) Do not operate the vacuum in a room where an infant or child is sleeping.

3) Do not operate the vacuum in an area where there are lit candles or fragile objects on the ﬂoor to be cleaned.

4) Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or

bump into.

5) Do not allow children to sit on the vacuum.

6) Do not use the vacuum on a wet surface.

SAFETY PRECAUTIONS

Do not operate the Roboking in a room

where a child is sleeping.

Doing so can cause injury or product dam-

age.

Do not insert any part of the body, such as

a hand or foot, below the brush or wheels

of the Roboking while in use.

Doing so can cause injury or product damage.

Do not spray or suck in inﬂammable

materials, surfactants, or drinking wa-

ter in the vicinity of the Roboking.

Doing so can cause ﬁre or product failure.

Inﬂammable materials: gasoline, thinner, etc.

Surfactant: detergent, articles for bath, etc.

Turn the power supply off immediately if

any abnormal sound, odor, or smoke is

generated from the Roboking.

Failure to do so can cause ﬁre or product

failure.

Do not operate the Roboking on nar-

row and high furniture such as a ward-

robe, refrigerator, desk, table, etc.

Doing so can cause injury or product failure.

Do not let children play with the

Roboking.

Doing so can cause injury or product dam-

age.

Do not expose the Roboking to

cold temperatures (less than 23°F

or -5°C) for a long period of time.

Use the Roboking indoors only.

Doing so can cause product failure.

Using it outdoors can cause prod-

uct failure.

The dust collected in the dust bin

can trigger allergies and may contain

harmful insects.

Frequently empty the dust bin and

maintain its cleanliness.

Do not drop the Roboking or sub-

ject it to strong impacts.

Doing so can cause injury or product failure.

WARNING

CAUTION

Cleaning will not proceed smoothly

on carpets with tassels or carpets

thicker than 10 mm.

The Roboking may bump into fur-

niture such as chair legs, table legs,

thin and long furniture, etc. while

operating.

It may be more convenient to

arrange them before using the

product.

For a quicker and cleaner performance,

place the chairs on top of the table.

SAFETY PRECAUTIONS

In rare cases, the Roboking’s

brush can damage the carpet. If

this happens, immediately stop the

cleaning operation.

When a carpet has long tassels, the

tassels can be damaged.

Do not allow the Roboking to

sweep up liquids, blades, thumb

tacks, kindling, etc.

These items can cause product

failure.

Do not let the main frame and

charging terminal of the home

station come into contact with

metallic objects.

Doing so can cause product failure.

Do not put sharp objects into

the opening of the Roboking’s

supersonic sensor.

Doing so can cause product failure.

Do not put water, detergent, etc.

into the Roboking.

Doing so can cause product failure.

Do not put any water or detergent

on the Roboking. If liquids get

inside of the Roboking, turn off the

power supply and contact an LG

Electronics sales agent or customer

care center.

Do not use the Roboking when the

dust bin is completely ﬁlled up.

Doing so can cause product failure.

If the ﬂoor is wet or has wet spots,

wipe them up before using the

Roboking. Do not use the HOM-

BOT on a wet surface.

Failure to do so can cause product

failure.

Check the following items before use:

expensive ceramics and valuables from the ﬂoor.

During cleaning, the Roboking may enter another room and continue cleaning.

Remove cables, strips, towels, socks, etc. from the ﬂoor so they will not get caught by the brush.

(0.315 in). It may be more convenient to remove or rearrange the position of these rugs or

carpets before using the product.

Please note, this product is not intended for use in any workshop, commercial ofﬁce, garage or outdoor

environment. It is for internal normal Domestic internal home use only.

Tip

CAUTION

When the robot cleaner is operating,

it may hit Chair,desk and table legs

or other narrow pieces of furniture.

For quicker and better cleaning,

place the dining chairs on top of

the dining table.

INCLUDED WITH PRODUCT

Figures can be different from actual objects.

Dry cell for remote controller

(2 units of AAA size)

launam noitarepOediug kciuQ

Remote controller Home station

Roboking

www.lg.com

P/No.: MHK63425321

QUICK GUIDE

CLEANING ROBOT

VR5940L

This guide brieﬂy describes how to use the Cleaning Robot.

For more detail, please referto the user manual

ENGLISH

DEUTSCH

OWNER’S MANUAL

CLEANING ROBOT

VR5940L

Before using, please carefully read the Safety Precautions pages to

allow for safe operation of the product. After reading the operation

manual, please keep it in an easily accessible location.

P/No.: MFL67086024

www.lg.com

ENGLISH

FRANÇAIS DEUTSCH ITALIANO

Brush for cleaning Filter

PARTS DESCRIPTION - ROBOKING

Figures can be different from actual objects.

Plan view

Dust bin cover button

Dust bin cover

State indication lamp

Manipulation Button

Detecting sensor of home station &

receiving sensor of remote controller

Ultrasonic sensor

Ventilation port

Cliff detection sensor

Charging terminal

Brush

Side brush

Wheel

Lower camera sensor

Battery

Power switch

Front view

Rear view

Bottom view

PART DESCRIPTION – HOME STATION / DUST BIN

ᶀ Figures can be different from actual objects.

Home station

Dust bin

Power lamp

Charging terminal

Reset button

Sponge ﬁlter

HEPA ﬁlter

Dust bin handle

Dust bin cover

Suction port cover

Dust bin cover opening button

Power cord ﬁxing groove

BUTTON FUNCTIONS – ROBOKING

START/STOP

Press the START/STOP button to turn the Roboking on/off or start/stop cleaning.

cally start cleaning.

will stop cleaning.

off the Roboking.

If the button is pressed while in the timer mode, the timer setting will be canceled.

Roboking

BUTTON FUNCTIONS – REMOTE CONTROL

Zigzag cleaning and then

spatial expansion

The Roboking will clean while

maneuvering in a zigzag

pattern and then expand the

cleaning area.

must ﬁrst stop the operation of the Roboking.

tion, and the battery cannot be charged.

If the main switch on the underside of the Roboking is in the off position, the Status display will

ﬂash and sound when the unit is manually placed onto the home station, to indicate that the

main switch is off.

Tip

Start

Directional button

Spot

The Roboking will start cleaning

The Roboking will move as

desired by the user: to front,

rear, left, and right sides for

cleaning.

Cleaning will concentrate within a

Charging

Stop

Timer

The Roboking will move to the

home station for charging.

If the Roboking is in operation it

will be stopped. If it has been

set for timer cleaning, the timer

will be canceled.

The timer can be set from 1-12

hours in advance.

Roboking

DISPLAY STATUS INFORMATION

when the unit is turned on again, unit it is changed again.

button on the Roboking.

Battery and timer hour indication

timer setting, the remaining battery

charge will be shown.

reservation time will be shown.

Timer icon

timer cleaning has

been set up.

Battery icon

charge is displayed on the

battery charge remaining

section, and will ﬂash

when charging is required.

Tip

BEFORE YOU START

Check these items before cleaning

Loading the remote control battery

1. Open the battery cover by lifting the rear hook of the remote control.

2. Insert two AAA batteries, checking for +, - nodes while loading.

3. Close the battery cover completely so that the batteries will not fall out.

Especially, remove expensive ceramics and valuables from the ﬂoor.

may enter another room and continue cleaning.

Precautions while using the remote control

remote control. Therefore, use it as far away as possible from such lamps.

Roboking Roboking

Roboking

OVERVIEW

With remote controller, auxiliary function can be used. For

auxiliary functions, manual cleaning, spot, timer function.

Install the home station. (page 13)

Insert the power cord plug into an outlet and locate the

station against a wall. If power is not supplied to the

home station, the Roboking will not charge.

Turn on the power supply of the Roboking. (page 14)

Turn on the power switch located on the bottom of the

Roboking and press the upper START/STOP button

to turn on the power supply.

* If the power supply is not turned on, refer to page 14.

Start cleaning. (page 15)

Press the START/STOP button once again while the

Roboking is turned on. You will hear the sound of

cleaning and cleaning will begin.

Automatic charge. (page 16-17)

The Roboking will self-diagnose and automatically

return to the home station to recharge before the

complete discharge of the battery. It can take up to three

hours to charge the battery.

HOW TO INSTALL THE HOME STATION

1. Position the home station against a wall, to prevent sliding dur-

ing docking, on hard level ﬂooring.

Remove objects within 1.5m. to the right and left side and

within 2m. to the front.

2. Plug the power cord into an outlet.

Wrap the power cord around the ﬁxed hanger on the back side

of the home station or along the wall surface so that the travel

path of the Roboking will not be obstructed.

3. Fix the home station against the wall so that it does not move.

How to Install the Home Station

will not return to the station to charge automatically.

Since the Roboking cleans along the wall, if the charging station is installed on the straight

surface of the wall, you can get a more efﬁcient cleaning.

Do not operate the Home Station if it has a damaged cord or plug, if it is not working properly,

or if it has been damaged or dropped. To avoid any electrical hazard, the cord must be replaced

by LG Electronics, or a qualiﬁed service person.

Fixing groove of power cord

Tip

Roboking

HOW TO TURN THE ROBOKING POWER SUPPLY ON & OFF

To turn the power supply on, turn the Roboking upside down

on a smooth/soft surface and check whether the main power

supply switch is turned on.

If the main power supply switch is turned off, turn on the

switch.

When turning on the power switch, do not press the button

located at the upper section of the Roboking. Operation of

the button can be delayed.

Turn off the power switch if the Roboking will not be used

for a long period of time, in order to protect the battery.

The power switch cover is used for protecting the switch

from the dust. Always keep the cover attached.

When the Roboking is not at the Home Station, and is in

the Stand by mode, press the ‘START/STOP’ button for

more than 1 second. The Roboking will be turned on and

a melody will be sounded.

If the power is turned on while the Roboking is not at

the Home Station, and nothing is done for ten minutes,

the power supply will automatically turn off to reduce

battery consumption.

Press the START/STOP button for two seconds while the

Roboking is turned on. A melody will sound when the

power is turned off.

Turning on the main power supply

Turning on from Stand By power.

Turning off the power supply

- If the power is turned off, turn off the main power switch and

then turn it back on.

- Turn on the power switch and wait for more than 3 seconds.

- Press the ‘START/STOP’ button when the power switch is

turned on.

- If the power is not turned on or if there is no display but only

the “Ting” sound, put the Roboking on the home station.

- If there is no change even when Roboking is attached to the

home station, press the reset switch located on the rear side

of the home station while the Roboking is attached on the

home station.

Tip

HOW TO START AND STOP CLEANING

After the Roboking is turned on, press the START/STOP button to

begin cleaning. A melody will sound and cleaning will begin.

Press the START/STOP button during the cleaning cycle to stop cleaning.

When the ‘START/STOP’ button is pressed while the power supply

of the Roboking is turned off, the power will be turned on. Press the

‘START/STOP’ button one more time to start cleaning.

After the Roboking is turned on, press the START button on the re-

mote control. A melody will sound and cleaning will begin.

Press the STOP button during the cleaning cycle to stop cleaning.

The Roboking cannot be turned on from Stand By, by using the

remote control when the power of the Roboking is off. When the

power is off, press the ‘START/STOP’ button on the upper side

of Roboking to turn the power on and to allow the remote to be

used.

When the START button on the main unit or remote control is pressed, Roboking will start cleaning in

‘Spatial expansion’ mode.

During cleaning, collisions can happen when the sensor cannot detect objects because of their shape.

When this happens, the internal impact detecting sensor will activate and engage a backward motion.

If the Roboking is set to start cleaning at a location away from the home station, put the device on a ﬂat

ﬂoor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a

location where there are no obstacles such as curtains or walls within 30 cm (11.8 in) of the Roboking.

Using the buttons on the Roboking

Using the remote control

For best results:

Roboking.

turned to the home station as the current home position has been accurately read.

Tip

Roboking

HOW TO CHARGE THE BATTERY

If using the Roboking for the ﬁrst time or to charge the battery by interrupting the cleaning, you can

manually charge the battery.

Method 1. Attach the Roboking to the home station by matching

up the two arrows on the Roboking and the home

station. A melody will sound and charging will begin.

When the Roboking is attached to the home station,

and a “TING” sound is generated repeatedly, please

check and ensure that the main On/Off on the underside

of the Roboking is in the ON position.

Method 2. When the HOMING button of the remote control

charging will start automatically when the Roboking has

returned to the Home Station.

If the Roboking is within 10 cm (3.9 in) of the front of the charging terminal while the power supply is

turned on, it will automatically be returned to the home station and charging will begin.

Take the following precautions when using the home station:

If foreign material is caught in the charging terminal, charging may not proceed smoothly.

Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.

To prevent electric shock, do not touch the charging terminal with any metallic objects.

To avoid ﬁre or electric shock, never disassemble or modify the home station.

Do not to place the home station or power plug near to a heating appliance.

Tip

The Roboking returns to the home station at the end of a cleaning cycle

or when its battery is running low.

If the Roboking is unable to dock to the home station on its ﬁrst at-

tempt, it will try again until it docks successfully.

When the Roboking has cleaned all areas that it can clean, it will

return to the home station even when the battery level is not low.

Automatic charging

Manual charging

Page is loading ...

LG VR5943L Owner's manual

Brand: LG

Model: VR5943L

Category: Robotic vacuum cleaners

Type: Owner's manual

Download PDF

report

LG VR5943L Owner's manual

LG VR5943L Owner's manual

Related papers

Other documents