MK BX-4 Operating instructions

Category
Circular saws
Type
Operating instructions

This manual is also suitable for

MK BX-4 Stand Setup Instruction
Part No. 162771
1
2
3
Instructions:
1. Open stand and set it on a flat & leveled surface.
2. Place saw’s footing within the 4 corner brackets on the stand as shown in figure.
3. Loose Knob (1) and move Hold Down Bracket (2) over the Left Rail (3).
4. Place the hook portion of the Bracket (2) over top the Left Rail and lay it on top
of the rail..
5. Tighten up the Knob (1) to secure saw in place..
Rel. 7/31/2007
Corner Bracket
  • Page 1 1
  • Page 2 2

MK BX-4 Operating instructions

Category
Circular saws
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI