Intel BLKDG41WV Datasheet

March 2010

Order Number: E89654-001

The Intel

®

Desktop Board DG41WV may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current

characterized errata are documented in the Intel Desktop Board DG41WV Specification Update.

Intel® Desktop Board

DG41WV

Technical Product Specification

Revision History

Revision Revision History Date

-001 Intel

®

Desktop Board DG41WV Technical Product Specification March 2010

This product specification applies to only the standard Intel

®

Desktop Board DG41WV with BIOS

identifier WVG4110H.86A.

Changes to this specification will be published in the Intel Desktop Board DG41WV Specification

Update before being incorporated into a revision of this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL

®

PRODUCTS. NO LICENSE,

EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS

GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR

SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR

IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT

OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN

WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN

WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR

DEATH MAY OCCUR.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other

intellectual property rights that relate to the presented subject matter. The furnishing of documents and

other materials and information does not provide any license, express or implied, by estoppel or otherwise,

to any such patents, trademarks, copyrights, or other intellectual property rights.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved”

or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for

conflicts or incompatibilities arising from future changes to them.

Intel

®

desktop boards may contain design defects or errors known as errata, which may cause the product

to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your

product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel

literature, may be obtained from:

Intel Corporation

P.O. Box 5937

Denver, CO 80217-9808

or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777,

Germany 44-0-1793-421-333, other Countries 708-296-9333.

Intel and the Intel logo are registered trademarks of Intel Corporation or its subsidiaries in the United States

and other countries.

* Other names and brands may be claimed as the property of others.

iii

Preface

This Technical Product Specification (TPS) specifies the board layout, components,

connectors, and power and environmental requirements for Intel

®

Desktop Board

DG41WV. It describes the standard product and available manufacturing options.

Intended Audience

The TPS is intended to provide detailed, technical information about the Intel Desktop

Board DG41WV and its components to the vendors, system integrators, and other

engineers and technicians who need this level of information. It is specifically not

intended for general audiences.

What This Document Contains

Chapter Description

1 A description of the hardware used on the board

2 Technical reference for the board

3 Regulatory compliance and battery disposal information

Typographical Conventions

This section contains information about the conventions used in this specification. Not

all of these symbols and abbreviations appear in all specifications of this type.

Notes, Cautions, and Warnings



NOTE

Notes call attention to important information.

#

INTEGRATOR’S NOTES

Integrator’s notes are used to call attention to information that may be useful to

system integrators.

CAUTION

Cautions are included to help you avoid damaging hardware or losing data.

Intel Desktop Board DG41WV Technical Product Specification

iv

Other Common Notation

# Used after a signal name to identify an active-low signal (such as USBP0#)

GB Gigabyte (1,073,741,824 bytes)

GB/s Gigabytes per second

Gbit Gigabit (1, 073,741,824 bits)

KB Kilobyte (1024 bytes)

Kbit Kilobit (1024 bits)

kbits/s 1000 bits per second

MB Megabyte (1,048,576 bytes)

MB/s Megabytes per second

Mbit Megabit (1,048,576 bits)

Mbit/s Megabits per second

xxh An address or data value ending with a lowercase h indicates a hexadecimal value.

x.x V Volts. Voltages are DC unless otherwise specified.

* This symbol is used to indicate third-party brands and names that are the property of their

respective owners.

v

Contents

1 Product Description

1.1 Overview.......................................................................................... 7

1.1.1 Feature Summary .................................................................. 7

1.1.2 Memory Considerations ........................................................... 8

1.1.3 Board Layout ......................................................................... 9

1.2 Online Support/Information .............................................................. 11

2 Technical Reference

2.1 Connectors, Headers, and Jumpers .................................................... 13

2.1.1 Component-side Headers and Connectors ................................ 13

2.1.2 Jumpers.............................................................................. 17

2.1.3 Back Panel Connectors .......................................................... 19

2.2 Mechanical Considerations ................................................................ 20

2.2.1 Form Factor......................................................................... 20

2.3 Electrical Considerations................................................................... 21

2.3.1 Power Supply Considerations ................................................. 21

2.4 Thermal Considerations.................................................................... 21

2.5 Reliability ....................................................................................... 22

2.6 ACPI Wake-up Devices and Events..................................................... 22

3 Regulatory Compliance and Battery Disposal Information

3.1 Regulatory Compliance..................................................................... 23

3.1.1 Safety Standards.................................................................. 23

3.1.2 European Union Declaration of Conformity Statement................ 24

3.1.3 Product Ecology Statements................................................... 25

3.1.4 EMC Regulations .................................................................. 27

3.1.5 Regulatory Compliance Marks (Board Level) ............................. 30

3.2 Battery Disposal Information............................................................. 31

Figures

1. Major Board Components.................................................................... 9

2. Component-side Connectors and Headers ........................................... 13

3. Jumpers......................................................................................... 17

4. Back Panel Connectors ..................................................................... 19

5. Board Dimensions ........................................................................... 20

Intel Desktop Board DG41WV Technical Product Specification

vi

Tables

1. Feature Summary.............................................................................. 7

2. Board Components Shown in Figure 1 ................................................ 10

3. Connectors and Headers Shown in Figure 2......................................... 14

4. Serial ATA Connectors...................................................................... 14

5. Serial Port B Connector .................................................................... 15

6. Chassis Fan Header ......................................................................... 15

7. Processor Fan Header ...................................................................... 15

8. Front Panel Audio Header ................................................................. 15

9. S/PDIF Out Header .......................................................................... 15

10. Front Panel Header .......................................................................... 16

11. Front Panel USB1/USB2 Header......................................................... 16

12. Processor Core Power Connector........................................................ 16

13. Main Power Connector...................................................................... 16

14. Intruder Alert Header....................................................................... 16

15. Jumpers Shown in Figure 3............................................................... 17

16. Clear CMOS Jumper Settings............................................................. 18

17. Keyboard Power Jumper Settings....................................................... 18

18. Recommended Power Supply Current Values ....................................... 21

19. Thermal Considerations for Components ............................................. 22

20. Wake-up Devices and Events ............................................................ 22

21. Safety Standards............................................................................. 23

22. EMC Regulations ............................................................................. 27

23. Regulatory Compliance Marks............................................................ 30

7

1 Product Description

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the major features of the Intel Desktop Board DG41WV.

Table 1. Feature Summary

Form Factor MicroATX (9.60 inches by 7.80 inches [243.84 millimeters by 198.12 millimeters])

Processor Support for the following:

• Intel

®

Core™2 Quad processor in an LGA775 socket

• Intel

®

Core™2 Duo processor in an LGA775 socket

• Intel

®

Pentium

®

Dual-Core processor in an LGA775 socket

• Intel

®

Celeron

®

processor Sequence 400 in an LGA775 socket

Memory

• Two 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets

• Support for DDR3 1066 MHz or DDR3 800 MHz DIMMs

• Support for up to 4 GB total system memory

Chipset

Intel

®

G41 Express Chipset, consisting of:

• Intel

®

82G41 Graphics and Memory Controller Hub (GMCH)

• Intel

®

82801GB I/O Controller Hub (ICH7)

Video Intel

®

Graphics Media Accelerator X4500 (Intel

®

GMA X4500) onboard graphics

subsystem with VGA output

Audio Six (5.1)-channel audio subsystem using the Realtek* ALC662 audio codec,

including:

• Back panel audio jacks

• Front panel audio header

• S/PDIF out header

Legacy I/O

Control

Legacy I/O controller (Winbond* W83627DHG-A) for serial, parallel, flexible

diskette drive, and PS/2* ports

Peripheral

Interfaces

• Eight USB 2.0 ports (four back panel connectors and two front panel headers

each providing two USB ports)

• Four Serial ATA (SATA) interfaces

• One flexible diskette drive interface

• PS/2 keyboard and mouse ports

• One parallel port back panel connector

• One on-board serial port connector and one back panel serial port connector

LAN Support 10/100/1000 Mbits/s LAN subsystem using a Realtek RTL8111C Gigabit Ethernet

Controller

BIOS

Intel

®

BIOS in a 16 Mb SPI device

continued

Intel Desktop Board DG41WV Technical Product Specification

8

Table 1. Feature Summary (continued)

Instantly Available

PC Technology

• Support for PCI* Local Bus Specification, Revision 2.3

• Support for PCI Express* Revision 1.1

• Suspend to RAM support

• Wake on PCI, serial port, front panel, PS/2 devices, PCI Express, LAN, and USB

ports

Expansion

Capabilities

• One PCI Express x16 bus add-in card connector

• One PCI Express x1 add-in card connector

• Two Conventional PCI bus connectors

Hardware Monitor

Subsystem

• Voltage sense to detect out of range power supply voltages

• Thermal sense to detect out of range thermal values

• Two fan headers

• Two fan sense inputs used to monitor fan activity

1.1.2 Memory Considerations

CAUTION

Using 4-GB DIMMs may cause system instability and subsequent data loss. It is

recommended to install only DIMMs with a capacity of 2 GB and less in the board’s

memory sockets.

Technical Reference

9

1.1.3 Board Layout

Figure 1 shows the location of the major components of Intel Desktop DG41WV.

Figure 1. Major Board Components

Intel Desktop Board DG41WV Technical Product Specification

10

Table 2 lists the components identified in Figure 1.

Table 2. Board Components Shown in Figure 1

Item/callout

from Figure 1

Descri

ption

A Conventional PCI bus add-in card connector

B Conventional PCI bus add-in card connector

C PCI Express x16 connector

D Chassis fan header

E PCI Express x1 connector

F Back panel connectors

G Keyboard power jumper block

H Processor core power connector (2 X 2)

I Piezoelectric speaker

J Intel 82G41 GMCH

K LGA775 processor socket

L Processor fan header

M DIMM 0 Channel A socket

N DIMM 0 Channel B socket

O Serial port B connector

P Floppy disk drive connector

Q Main Power connector (2 X 12)

R Battery

S Intel 82801GB I/O Controller Hub (ICH7)

T Serial ATA connectors

U Clear CMOS jumper block

V Intruder alert header

W Front panel header

X Front panel USB header

Y Front panel USB header

Z S/PDIF header

AA Front panel audio header

Technical Reference

11

1.2 Online Support/Information

To find information about… Visit this World Wide Web site:

Intel Desktop Board DG41WV http://www.intel.com/products/motherboard/DG41WV/index.htm

Desktop Board Support http://www.intel.com/support/motherboards/desktop

Available configurations for the Intel

Desktop Board DG41WV

http://www.intel.com/products/motherboard/DG41WV/index.htm

Supported processors http://processormatch.intel.com

Chipset information http://www.intel.com/products/desktop/chipsets/index.htm

BIOS and driver updates http://downloadcenter.intel.com

Tested Memory http://support.intel.com/support/motherboards/desktop/sb/CS-

025414.htm

Intel Desktop Board DG41WV Technical Product Specification

12

Technical Reference

13

2 Technical Reference

2.1 Connectors, Headers, and Jumpers

This section describes the board’s connectors, headers, and jumpers.

2.1.1 Component-side Headers and Connectors

Figure 2 shows the location of the component-side headers and connectors.

Figure 2. Component-side Connectors and Headers

Intel Desktop Board DG41WV Technical Product Specification

14

Table 3 lists the connectors and headers identified in Figure 2.

Table 3. Connectors and Headers Shown in Figure 2

Item/callout

in Figure 2

Descri

ption

A Chassis fan header

B Processor core power connector (2 X 2)

C Processor fan header

D Serial port B connector

E Main power connector (2 X 12)

F Serial ATA connectors

G Intruder alert header

H Front panel header

I Front panel USB header

J Front panel USB header

K S/PDIF header

L Front panel audio header

Table 4 though Table 14 list the signal names for the component-side connectors and

headers.

Table 4. Serial ATA Connectors

Pin Signal Name

1 Ground

2 TXP

3 TXN

4 Ground

5 RXN

6 RXP

7 Ground

Technical Reference

15

Table 5. Serial Port B Connector

Pin Signal Name Pin Signal Name

1 DDCD2# 2 RRXD2

3 TTXD2 4 DDTR2#

5 Ground 6 DDSR2#

7 RRTS2# 8 CCTS2#

9 RRI2# 10 Key (no pin)

Table 6. Chassis Fan Header

Pin Signal Name

1 Sense

2 +12 V

3 Ground

Table 7. Processor Fan Header

Pin Signal Name

1 Ground

2 +12 V

3 CFAN_D

4 CPUFAN_PWM_C

Table 8. Front Panel Audio Header

Pin Signal Name Pin Signal Name

1 MIC2_L 2 AGND

3 MIC2_R 4 F_AUDIO_DET#

5 LIN2_R 6 MIC_JD

7 AGND 8 KEY (no pin)

9 LIN2_L 10 LIN_JD

Table 9. S/PDIF Out Header

Pin Signal Name

1 +5V

2 Key (no pin)

3 SPDIFO

4 Ground

Intel Desktop Board DG41WV Technical Product Specification

16

Table 10. Front Panel Header

Pin Signal Name Pin Signal Name

1 HDLED+ 2 FP_LED+

3 HDLED- 4 FP_LED-

5 Ground 6 FP_PWRBTN#

7 FP_SYS_RST# 8 Ground

9 FPA_DET# 10 Key (no pin)

Table 11. Front Panel USB1/USB2 Header

Pin Signal Name Pin Signal Name

1 +5V_Dual 2 +5V_Dual

3 D1- 4 D2-

5 D1+ 6 D2+

7 Ground 8 Ground

9 Key (no pin) 10 No connect

Table 12. Processor Core Power Connector

Pin Signal Name Pin Signal Name

1 Ground 2 Ground

3 +12 V 4 +12 V

Table 13. Main Power Connector

Pin Signal Name Pin Signal Name

1 +3.3 V 13 +3.3 V

2 +3.3 V 14 -12 V

3 Ground 15 Ground

4 +5 V 16 PS-ON# (power supply remote on/off)

5 Ground 17 Ground

6 +5 V 18 Ground

7 Ground 19 Ground

8 PWRGD (Power Good) 20 No connect

9 +5 V (Standby) 21 +5 V

10 +12 V 22 +5 V

11 +12 V 23 +5 V

12 +3.3 V 24 Ground

Table 14. Intruder Alert Header

Pin Signal Name

1 Intruder#

2 Ground

Technical Reference

17

2.1.2 Jumpers

Figure 3 shows the location of the board’s jumper blocks.

Figure 3. Jumpers

Table 15 lists the jumper blocks identified in Figure 3.

Table 15. Jumpers Shown in Figure 3

Item/callout

in Figure 3

Descri

ption

A Keyboard power jumper block

B Clear CMOS jumper block

Intel Desktop Board DG41WV Technical Product Specification

18

Table 16 and Table 17 list the settings for the jumper blocks.

Table 16. Clear CMOS Jumper Settings

Function/Mode Jumper Setting Description

Normal 1-2 The BIOS uses current configuration information and

passwords for booting.

Clear CMOS 2-3 Clears the time, date, and BIOS password.

Note: You can clear these settings by turning off the system

power and moving the jumper to pins 2 and 3. After 10

seconds, move the jumper back to pins 1 and 2 and power on

the system.

Do not leave the jumper on pins 2 and 3 while the system is

powered on or the desktop board may be damaged.

Table 17. Keyboard Power Jumper Settings

Function/Mode Jumper Setting Configuration

Disable 1-2 Disables the keyboard wake-up feature

Enable 2-3 Enables the keyboard wake-up feature (default)

Technical Reference

19

2.1.3 Back Panel Connectors

Figure 4 shows the locations of the back panel connectors.

Item Description

A PS/2 mouse

B PS/2 keyboard

C Serial A

D Parallel

E VGA

F USB 2.0 (2)

G LAN

H USB 2.0 (2)

I Line in

J Line out

K Mic

Figure 4. Back Panel Connectors

Intel Desktop Board DG41WV Technical Product Specification

20

2.2 Mechanical Considerations

2.2.1 Form Factor

The board is designed to fit into a microATX-form-factor chassis. Figure 5 illustrates

the mechanical form factor of the board. Dimensions are given in inches [millimeters].

The outer dimensions are 9.60 inches by 7.80 inches [243.84 millimeters by

198.12 millimeters]. The locations of the I/O connectors and mounting holes are in

compliance with the ATX specification.

Figure 5. Board Dimensions

Page is loading ...

Intel BLKDG41WV Datasheet

This manual is also suitable for

Intel BLKDG41WV Datasheet

Related papers

Other documents