5019 301 05482
Whirlpool is a registered trademark of Whirlpool USA.
Programme
Care
Labels
Type of wash / Notes
Max
Load
Kg
Detergents and additives Special options Temperature
Selector
°C
Programme
Selector
Bleach Softener Main
Wash
Pre-
wash
Half
Load
Rinse
Hold
Spin Speed
Reduction
800
500
Cotton
with prewash
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear,
shirts etc.).
5.0
❉❉
Yes Yes
❉❉ ❉
Max. 95°
1
Synthetics
with prewash
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends
with cotton.
2.5 —
❉
Yes Yes
❉❉
❉
Max. 60°
2
Delicates
with prewash
Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5 —
❉
Yes Yes —
❉
❉
Max. 40°
3
Cotton
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
5.0
❉❉
Yes —
❉❉ ❉
Max. 95°
4
Cotton
short
Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
5.0
❉❉
Yes —
❉❉ ❉
Max. 60°
5
Synthetics
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
2.5 —
❉
Yes —
❉❉
❉
Max. 60°
6
Synthetics
short
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
2.5 —
❉
Yes —
❉❉
❉
Max. 60°
7
Delicates
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5 —
❉
Yes — —
❉
❉
Max. 40°
8
Wool
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0 —
❉
Yes — —
❉
❉
Max. 40°
9
Silk
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
1.0 —
❉
Yes — —
❉
—
1)
Max. 30°
10
Rinse + spin —
With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle.
5.0 —
❉
——
❉❉ ❉
—
A
Spin —
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
5.0 — — — — — —
❉
—
B
Gentle spin —
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
1.5 — — — — — —
❉
—
C
Drain —
Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate and wool programme
and for premature removal of the laundry.
—————— — — —
D
A. “On/Off” Button
B. “On/Off” Indication
❉
: optional / Yes: dosing required
1)For improved garment care spin speed is null in this
programme.
During the selected washing programme the
programme selector knob moves by steps clockwise
through the phases
prewash
,
main wash
,
rinse and
spin
. Each step takes from some seconds to several
minutes.
BA
AWM 5083
GB
3gb05482.fm Page 1 Sunday, May 18, 2003 12:33 PM
Black process 45.0° 100.0 LPI
5019 301 05482
Whirlpool is a registered trademark of Whirlpool USA.
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Open the tap.
2. Set the
programme selector
to the desired
programme.
3. Set the
temperature selector
to the desired
temperature.
4.
Special options
can be selected.
5. Check that the door is well closed and turn on the
washing machine by pressing the
“ON/OFF”
button. The indicator lights up, indicating that
the washing machine is on.
“Half Load” button
• Reduces water consumption, above all during rinsing.
• Suitable for lightly-soiled laundry and small loads
(max 3 kg).
Note:
Reduce the detergent quantity.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme.
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)
Cotton 95 5.0 49 1.70 1:50
Cotton 60 5.0 44 0.95 2:00
Cotton 40 5.0 44 0.55 1:50
Synthetics 60 2.5 55 0.80 1:25
Synthetics 40 2.5 50 0.60 0:50
Delicates 40 1.5 50 0.50 0:45
Wool 40 1.0 50 0.50 0:40
Silk 30 1.0 37 0.40 0:40
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE
PROGRAMME
SELECT ANY DESIDERED OPTION
“Spin Speed Reduction” button
• Reduces the predetermined automatic
maximum spin speed.
In some programmes the maximum final spin
speed is limited to go easy on your laundry
items. Selection of a higher spin speed is not
possible.
To reselect a programme when a cycle has already
begun:
1. Switch off the appliance by pressing the “
ON/
OFF
” button.
2. Select the new programme.
3. Start the programme by pressing the “
ON/OFF
”
button.
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
•
WATER LEVEL
It may not be visible as the cycle is optimised
for a minimum water consumption without
compromising washing results.
•
SPIN SPEED CONTROL
Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine damage
and excessive vibrations and consequent
noise produced by the machine due to load
unbalance: by selecting high spin speeds the
noise level increases.
•
MOTOR NOISE
The running noises of the new, electronically-
controlled motor are not the same as the ones
you are used to from your old appliance. Don’t
be surprised - modern technology has a
modern sound.
•
CLEANING THE FILTER
To ensure an impeccable function of the
pump, check the filter regular and clean it if
necessary.
PROGRAMME CHANGE
PROGRAMME END
NOTES AND INDICATIONS FOR USE
3gb05482.fm Page 2 Sunday, May 18, 2003 12:33 PM
Black process 45.0° 100.0 LPI
/