All Things Cedar PS48U User manual

Brand
All Things Cedar
Model
PS48U
Type
User manual

All Things Cedar PS48U is a porch swing kit that includes all the necessary hardware and materials for assembly. The swing is made of durable cedar wood and features a comfortable contoured seat and back. It can be easily assembled in six steps using common tools. Once assembled, the swing can be hung from a roof beam or A-frame using the included chains and eyebolts. The swing is designed to provide a gentle incline, which can be adjusted by raising or lowering the front of the swing. The swing is perfect for relaxing on a porch or patio and can also be used as a decorative accent.

All Things Cedar PS48U is a porch swing kit that includes all the necessary hardware and materials for assembly. The swing is made of durable cedar wood and features a comfortable contoured seat and back. It can be easily assembled in six steps using common tools. Once assembled, the swing can be hung from a roof beam or A-frame using the included chains and eyebolts. The swing is designed to provide a gentle incline, which can be adjusted by raising or lowering the front of the swing. The swing is perfect for relaxing on a porch or patio and can also be used as a decorative accent.

Porch Swing
(PS48U Unassembled Kit)
Tools Needed: #2 Philips or Robertson screwdriver, wood glue and a ½ wrench.
STEP 1. Build Frame
• Attach the Front Rail (E) to the 3 Seat Supports (D) using 1
¾ inch screws.
STEP 2. Attach Seat Slats
• Beginning from front of seat use the 3/8 inch spacer to lay out 6 seat
slats across the seat supports and attach using 1¾ inch screws.
STEP 3. Attach Posts
• Attach the 3 Back Posts (C) to the seat supports using lag screws
and washers.
Package Contents:
(A) Arms…2
(B) Arm Supports...2
(C) Back Posts…3
(D) Seat Supports…3
(E) Scalloped Front Rail…1
(F) Seat Slats…12
(G) Narrow Top Slat…1
Hardware
• 2 ½" screw...8
• 1 ¾” screw...45
• Carriage bolt…2
• Lag Screw…3
• Eye bolt…4
• Washer...9
• Hex Nut...6
• Quick Link...6
• Chain… (4 pcs)
• 3/8” Spacer… 2
STEP 4. Attach Back Slats
• Tip the swing so that it is resting on the 3 Back Posts and attach the
narrow top slat (G) along the top of the swing.
• Using the 3/8” spacer evenly space and attach the remaining 6 slats
to the back posts starting from top slat down.
STEP 5. Attach Arms
• Mount Arm Supports to side of the Swing using Carriage
Bolts.
• Set front of arm over arm support and align rear arm with pre-
drilled holes in back post - make arm flush with back post and
attach arm using 2-1/2 inch screws.
• Make inside of arm flush with arm support and attach arm to
arm support using 2-1/2 inch screws.
( glue is optional here)
STEP 6. Hardware Placement
NOTE: If you hanging distance is higher than 8 ft. you may require additional chain.
• Use washers and hex nuts to install Eye-Bolts to the pre-drilled holes
located on each side of the swing.
• Use a quick link to attach 2 pieces of chain to each side of your roof
beam or A-Frame. ( space 50 inches apart)
• Insert the free ends of the chain through the guide holes on the arm
and attach to each eyebolt using quick-links.
(note: a hammer may be required to tap quick-link onto eyebolt)
• To create a gentle incline raise the front of the swing by a link or two.
• Your swing is ready for use.
♥ Thank you for choosing All Things Cedar ♥
  • Page 1 1
  • Page 2 2

All Things Cedar PS48U User manual

Brand
All Things Cedar
Model
PS48U
Type
User manual

All Things Cedar PS48U is a porch swing kit that includes all the necessary hardware and materials for assembly. The swing is made of durable cedar wood and features a comfortable contoured seat and back. It can be easily assembled in six steps using common tools. Once assembled, the swing can be hung from a roof beam or A-frame using the included chains and eyebolts. The swing is designed to provide a gentle incline, which can be adjusted by raising or lowering the front of the swing. The swing is perfect for relaxing on a porch or patio and can also be used as a decorative accent.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents