Focusrite Scarlett 2i2 2nd Gen, Scarlett 2i2 Studio, Scarlett 2i4 2nd Gen, Scarlett Solo 2nd Gen, Scarlett Solo Studio Pack 2nd Gen Getting Started

Hello! I am an AI chatbot trained to assist you with the Focusrite Scarlett 2i2 2nd Gen Getting Started. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
What is the first step to use the Scarlett (2nd Gen.) audio interface on a Mac?

Where can I find the Scarlett audio interface settings on a Mac?

What do I need to do before using the Scarlett audio interface on Windows?

How do I select the Scarlett as the default playback and recording device on Windows?

Where can I download the included software for the Scarlett audio interface?

Where can I find the PRODUCT BUNDLE CODE for the Scarlett audio interface?

GET STARTED WITH SCARLETT Solo, 2i2 & 2i4

Thanks for choosing the Scarlett (2

Gen.) as your audio interface.

For an in depth video tutorial, please go to focusrite.com/get-

started or see the quick step guide below...

Mac Users

1. Connect your Scarlett to your Mac using the included USB

cable

2. Go to "System Preferences" then "Sound" and select your

Scarlett Eg. "Scarlett 2i2" as the input and output device

3. You are now ready to use your Scarlett audio interface

(Please Note: You may need to select the Scarlett as your

interface within your music software preferences)

Windows Users

1. Please go to focusrite.com/register

2. Enter your serial number, found on the bottom of your hardware

3. Then, enter your PRODUCT BUNDLE CODE found on the

inside of the product box

4. Download and install the relevant audio drivers

5. Run the installer

6. Connect your Scarlett with the included USB cable

7. Go to "CONTROL PANEL" then "SOUND" and select your

Scarlett Eg. "Scarlett 2i2" as the playback and recording default

device

8. You are now ready to use your Scarlett audio interface

(Please Note: You may need to select the Scarlett as your

interface within your music software preferences)

DOWNLOADING THE INCLUDED SOFTWARE

To download the included software, you will need to register your

Scarlett at focusrite.com/register

You will need the product serial number, found on the bottom of

your hardware

Once you have entered the serial number, you will be asked to

enter your PRODUCT BUNDLE CODE, found printed on the inside

of the product box in the following format:

XXXXXX-XXXXXX-XXXXXX

This info is accurate as of May 2016, however we are constantly

striving to improve the customer experience and as a result this

process is subject to change. If anything appears to have changed

please refer to www.focusrite.com/get-started for the latest info.

Focusrite is a trademark of Focusrite Audio Engineering Limited

registered in the UK and other countries. Scarlett Solo Studio,

Scarlett 2i2 Studio, Scarlett Solo, Scarlett 2i2 and Scarlett 2i4 are

trademarks of Focusrite Audio Engineering Limited registered in