Monolith MA 501-I User manual
- Category
- Paper shredders
- Type
- User manual
1. Description of MA 501-I components .............................................................................................3
2. Technical Data ..........................................................................................................................................3
3. Safety instructions ...................................................................................................................................4
4. Safety symbols ..........................................................................................................................................4
5. Proper use ...................................................................................................................................................5
6. Motor protection ......................................................................................................................................6
7. Using the machine ..................................................................................................................................6
8. Machine malfunctions ...........................................................................................................................7
9. Cleaning ......................................................................................................................................................7
10. Storage .........................................................................................................................................................7
11. Disposal .......................................................................................................................................................8
12. Declaration of conformity .....................................................................................................................8
13. Limited Product Warranty .....................................................................................................................8
14. Warranty card ............................................................................................................................................9
Contents
Information on safety instructions
!
2
Items supplied / content of package
1x paper shredder
All safety instructions and other important information are highlighted in grey.
The item has safety features.
However, to avoid damage or injury, read the safety instructions carefully and only use the
shredder as described in this guide.
Keep the guide for future reference.
If you are giving the machine to someone else, please keep this guide with the product.
3
1. Description of MA 501-I components
2. Technical Data
1 Slide switch (REV/OFF/AUTO)
2 READY/ON light
3 Plug
4 extendable rail for xing to the waste container
5 Feed-in slot for paper
6 Paper sensor
3
Model MA 501-I
Dimensions (WxDxH) 302 x 113 x 68.5 mm
Weight approx. 0.93 kg
Working width 220 mm (DIN A4)
Cutting performance per operation up to 6 sheets max. (80 g/m2)
Speed 2.2 m per minute
Cutting type strip cut
Strip width 6 mm cutting width
Supported waste baskets 27.5 to 37.5 cm
Automatic start/stop function yes
REV reverse function yes
Rated operating time 1 minute
Rated nonoperating time 30 minutes
Decibel approx. 70 dB
Voltage AC 220 – 240 V; 50 Hz
Power consumption 190 W / 1.0 A
Protection class II
6
5
41 2
4. Safety symbols
- Only connect the device indoors and to a correctly installed 220-240 V
socket with an earthed contact. This must be near the device and easily accessible to allow
an emergency
disconnection by pulling the power plug. Adapter plugs or extension cords must also be
equipped with safety contacts and be easily accessible to allow emergency disconnection
from the power.
- Protect the device from direct sunlight, extreme heat and moisture. The device‘s location
must also be dry.
- The device must not come into contact with water or other liquids. Risk of short circuit
- During operation do not perform any other work on the device (such as cleaning).
- Do not place the unit near radiators.
- Unplug the power cord before emptying the waste basket. Likewise before a long period of
inactivity or before cleaning the device.
- In the event of damage to the power cord, the plug or the device itself, stop using the
device. Danger of Injury!
- Do not exceed the recommended capacity of the outlet.
- Do not make any modications to the power cord, as it is designed for the specied power
supply.
Protection class II: The device is equipped with a protective insulation and thus has no expo-
sed metal parts that could conduct voltage in the event of failure.
Please note: Disregarding these safety signs can cause serious physical injuries and destroy
your device! If an object (bracelet, tie etc.) does accidentally enter the feed slot, unplug at the
mains immediately!
Do not reach into the inlet slot!
Keep neckties, scarves and loose
clothing away from the area of the
inlet slot!
Not a child‘s toy! Children may
only use the device if under
competent supervision.
Avoid wearing accessoiries
(necklaces, etc.) while using the
device!
!3. Safety instructions
Do not insert any paper clips or
staples in the inlet slot!
Keep long, loose hair away from
the area of the inlet slot.
Do not use any spray cans / aero-
sols in the vicinity of device!
Only insert a maximum of 6 sheets
of paper (80 g/m²) at any one time!
4
Meaning of the warning symbols
Caution! Read the instructions!
5.
Proper use
- Before using the device for the rst time, please read the operating manual carefully.
- This device has been designed for shredding paper. Use it only for this purpose and as
described in the instructions.
- Do not shred formats larger than A4 or continuous paper. Do not feed more sheets than
stated (per shred max. 6 sheets 80 g/m2) into the device.
Caution: The device is designed for short-term operation. After continuous
operation of a maximum of 1 minute, let the device rest for 30 minutes.
- The device is designed only for private use.
- Place the waste basket, to which the device is attached, on a stable, even surface so that
it won‘t tip or fall over. Please use a waste basket with a diameter of 27.5 to 37.5 cm.
- Do not sit on the unit or place objects upon it.
- The product is equipped with appropriate safety devices and markings. Read the safety
instructions carefully and only use the device as described in this manual to avoid
injuries or damage.
- The device may only be operated by adults.
- Children may use this product only under adult supervision.
- Keep the device away from pets.
- Plastic bags can be dangerous. To avoid the risk of suocation, keep the bag out of the
reach of babies and small children.
- Retain the manual for future reference.
- Only pass on this device along with this operating manual.
Not for disposal
with domestic waste!
5
3. Safety instructions
6
6. Motor protection
Caution: The unit is designed for short-term use of a maximum of
one minute. After this, please let the motor cool down for approximately 30 minutes.
In the event of overloading, the motor will shut down automatically. Remove the plug
from the socket and ensure that the slide switch is set to OFF. Let the engine cool for about
30 minutes at room temperature before plugging the power cord back into the socket.
Continue operation.
Please avoid overloading the motor by inserting more paper than indicated, for example.
This can lead to other defects, such as on the inner rollers.
7. Using the machine
- Remove the unit from the packaging carefully.
- If necessary, pull out the xing rails 4 and place the machine on the round waste
basket chosen by you (suitable for diameters from 27.5 to 37.5 cm).
- Make sure that the paper shredder sits properly on the waste basket.
- Now connect insert the device‘s plug 3 into a power socket.
- Set the slide switch 1 to AUTO. The READY/ON light 2 will shine green and the device
is ready.
- Feed the paper through the slot 5 into the cutting mechanism.
Make sure that you insert the paper straight and centred. Prior to insertion remove all
metal parts (staples, paper clips etc.) from the paper. In the middle of the feed-in slot
is a sensor 6, that is activated as soon as you introduce paper. Therefore please always
feed in smaller paper sizes in the middle. If the slide switch is set to AUTO, the unit will
turn o automatically as soon as the paper is processed.
- When you no longer need the device, set the slide switch to OFF. The READY/ON light
is on. Be sure to empty the waste basket regularly.
6
!
Importer: monolith GmbH • Maxstraße 16 • D-45127 Essen
www.monolith-support.com ©2016 • Made in China
7
8. Machine malfunctions
If you were unable to eliminate the error yourself, please contact your dealer or call service
hotline.
Clearing a paper jam:
If the cutting mechanism is fed too much paper, a paper jam occurs. Proceed as follows:
- Move the slide switch into the REV position. The cutting mechanism runs backwards
and the excess paper slides back out.
- Reduce the amount of paper and switch back to AUTO.
- If the paper jam was not xed, unplug the device and then remove the paper remnants
manually from the cutting mechanism.
The device does not automatically switch o:
If the slide switch is set to REV (e.g. in the event of a paper jam), it is possible that there are
paper remnants under the paper sensor. In this case, do not switch back to AUTO, as the
device cannot switch o by itself.
In most cases, the paper remnants can be removed by insertion of a further sheet of paper
into the feed-in slot. If the device still does not stop by itself, proceed as follows:
- Unplug the device and turn it around.
- Carefully remove the pieces of paper from the feed-in slot with tweezers or similar.
Please be careful not to damage the cutters.
9.
Cleaning
- Unplug the device before cleaning.
- Clean the unit with a soft, slightly damp cloth.
- Do not attempt to repair the device yourself. Have repairs performed by qualied
personnel. No liability is accepted for personal injury caused by improper use.
- The device is maintenance-free and the cutting mechanism need not be treated with
special oil.
10.
Storage
Store the unit cleaned and in its original packaging when not in use. Keep the device dry
and away from any heat source.
7
!
13. Limited Product Warranty
WHAT THIS WARRANTY COVERS:
This limited warranty covers the original purchase of new product used for normal com-
mercial, personal or household use. monolith GmbH warrants its products will be free from
defects in materials and workmanship (normal wear and tear excepted), for two (2) years
from the date of purchase.
WHAT THIS WARRANTY DOES NOT COVER:
This warranty does not apply to damage caused by re, accident, negligence, misuse, im-
proper, cleaning or other circumstances not directly attributable to manufacturing defects.
LIMITATION OF DAMAGES:
monolith provides this limited warranty in lieu of all other warranties either express or
implied. Expressly excluded are all warranties of tness for a particular purpose or
merchantability. monolith‘s sole obligation and user‘s exclusive remedy under this
warranty shall be limited to the replacement at monolith‘s sole discretion and cost of
products or components. In no event shall monolith, its aliates, subsidiaries or parent
companies be responsible for consequential, special or incidental damages arising out of
a claim of defective product even if monolith has been advised of the possibility of such
damages.
11. Disposal
The product packaging is made of recyclable materials.
Dispose of in an environmentally friendly manner. Do not dispose of the unit at
the end of its service life in normal household waste. According to legal requi-
rements, it must be disposed of properly. Thus valuable substances contained
in the device are recycled, protecting the environment. Please inquire about at
your local authority regarding suitable options. Before disposal, ensure the device is unusa-
ble. Disconnect the device from the mains supply and remove the power cord.
8
The EU declaration of conformity can be requested from the address at the
following address:
monolith GmbH, Maxstraße 16, 45127 Essen, Germany
12. Declaration of conformity
Customer Service:
service hotline: 00 800 79 333 900 (free), mon-fri 8:00-17:00 h
service fax number: 00 49 6151 1019 0 7911
Serviceadresse: Antalis UK Ltd, Tara Street Hilltop Industrial Estate Bardon,
Coalville Leicestershire LE67 1TW
e-mail: [email protected]
www.monolith-support.com
Warranty Card – Paper Shredder
Paper Shredder MA 501-I
Please complete this warranty card and enclose it with the machine,
together with your proof of purchase!
Customer data:
Surname, rst name:
Street, number:
Postcode, town: Country:
Telephone number with international daillung code:
E-mail:
Description of fault:
Daten of purchase:
Date/signature:
Note:
When claiming on the warranty, the warranty card and the proof of purchase must be included
with the machine as well as a detailed description of the fault wherever possible. Warranty
cards sent separately afterwards will not be accepted.
2 year
GUARANTEE
Customer Service:
service hotline: 00 800 79 333 900 (free), mon-fri 8:00-17:00 h
service fax number: 00 49 6151 1019 0 7911
Serviceadresse: Antalis UK Ltd, Tara Street Hilltop Industrial Estate Bardon,
Coalville Leicestershire LE67 1TW
e-mail: [email protected]
www.monolith-support.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Monolith MA 501-I User manual
- Category
- Paper shredders
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI