ponico PONI-P100-IVA Installation guide

IP Intelligent Video Analysis Camera

（PONI-S100-IVA, PONI-P100-IVA）

Installation Manual

（English）

Ver. 1.0 (110905)

PONICO KOREA CORPORATION

PONICO CANADA ENTERPRISE CORPORATION

Manual Guide

This manual is for the Installation and operation of PONI-S100-IVA and

PONI-P100-IVA, intelligent IP camera. PONICO Intelligent Video

Analysis (IVA) is a camera with built-in IVA algorism function. This

product has been developed with its technological excellency and its

quality and reliability are guaranteed. Please read this manual before

using our product and please be noted for the cautions and regulations

while using this product.

Regulations

· Copyright for this product manual is reserved for PONICO.

· This manual cannot be replicated without permission of PONICO

· We are not responsible for the product damages caused by not following the instru

ctions indicated in the manual, and use of power sources other than indicated.

· For repair and/or extending functions of the product, please contact the sales age

ncy for technical assistance from professional engineers.

· For any other inquiries or questions about the product, please contact the sales a

gency.

Notice:

This product is classified as a class A for Commercial use and Certified for, KCC from N

ational Radio Research Agency, and International Standard Certificate of CE and FCC. F

or uses other than commercial use, please contact the sales agency.

Registrations for KCC and CE, FCC application is in progress.

１．Product Functions and Its Applications

１－１＜PONI-S100-IVA＞

IP Camera Functions:

1) Remote live video monitoring (H.264)

2) Both directional voice communications

3) Network GPIO control

4) Network S/W Up-grade

VA (Video Analysis) Functions:

1) Line Crossing: Detection of imaginary line crossing.

2) Area passing: Detection of passing restricted area.

3) Appear/Disappear: Detection of idle object, removed object. Detection of

unauthorized parking and invasion. Detection of illegal throw-away.

4) Mask Setup: Image stabilization by ignoring redundant movement and

emphasizing core movement.

5) CAM Sabotage: Detection of mischief, blocking view, intentional change of angle

against the camera.

6) Viewer & NVR Viewer (Recording): Remote monitoring and recording up to 9

locations at the same time. At the time of playback and recording, there is a

function to search only designated event and recording only the event is available

from a full recorded images.

Applications

· Shopping center, Mall, Hotel, School,

· Security of building and its peripheral, Residence, Office,

· Museum, Art gallery, Parking lot, Airport,

· Traffic control, Pedestrian crossing, Construction site,

· Railway station, Subway station, Platform,

· Prison, Boarder, Hazardous material control,

· Other security control areas.

１－２＜PONI-P100-IVA＞

IP Camera Function:

1) Remote live video monitoring (H.264)

2) Both directional voice communications

3) Network GPIO control

4) Network S/W Up-grade

VA (Video Analysis) Functions:

1) Line Crossing: Detection of objects closing imaginary line and count number of

objects closing IN and OUT of the line.

2) Area passing: Detection of objects passing through restricted area and count

number of objects passing IN and OUT of the area.

3) Mask Setup: Image stabilization by ignoring redundant movement and

emphasizing core movement.

4) CAM Sabotage: Detection of mischief, blocking view, intentional change of angle

against the camera.

5) Viewer & NVR Viewer (Recording): Remote monitoring and recording up to 9

locations at the same time. At the time of playback and recording, there is a

function to search only designated event and recording only the event is available

from a full recorded images.

Applications

Managerial Control

As number of people being counted, it is possible to analyze sales amount or quant

ity by actual customers' number.

Seasonal differential will be predicted by use of actual data on shops or on date.

Detailed sales trend by time zone will be analyzed and it will be helpful to define

shop operating time.

Increase or decrease of sales by shops will be found on real time basis, so that

customers' preference will be taken into consideration.

Marketing

By counting exact number of customers, it is possible to perform optimal

promotion.

Various promotional campaigns can be scheduled based on real customers' number.

Marketing cost calculation by head-count is feasible.

Marketing analysis by day, week, month based on actual customers' number will be

possible.

Tenant Control

It can define most prospective and attractive area by actual data of head-counting.

It can improve pedestrian flow, more smooth movement of customer.

Tenant owner can add value by showing actual customers' number and flow.

Facility Control and maintenance

It is possible to calculate maintenance cost per one person who visited shop.

It is possible to layout optimal number and places of security person and cleaning

person working based on number of actual visited customers.

It is possible to use such counted data for future investment or building expansion.

It is possible to prevent invasion of customers to dangerous area by use of

counted data.

２．Product Descriptions

２－１ Product Configuration and Package Contents

２－１－1. Followings are contained in the package:

A) （PONI-S100-IVA, PONI-P100-IVA） Camera

B） Power adapter＋AC Code（100~240VAC 50-60Hz / 12VDC, 2A ）

C) CD Contents: 1.NVR Install Soft ware

2.IP Finder Install Soft ware。

3. IP Camera＆VA Setup Manual

4.NVR Manual。5.PONI-S100 & P100-IVA Installation Manual

（C D）

・IP Finder Scan Image ・NVR Manual Image

２－２ Camera External and Internal Structures

２－２－１ Internal Structures and Functional Guides.

A) Internal Structure of Camera

＊ LAN Cable： Can be connected to １０Mｂｐｓ/100Mbps Ethernet, please use standard

RJ-４５ Connecter.（LED light blinks to yellow when RJ-４５ Connecter is correctly

connected.

＊ＰＯＷＥＲ Connecter：Power is supplied by the adapter contained.

（１２V/２A）

＊ BNC Connecter ：Analog video is outputted from the camera. Live images can be seen

by connecting to a monitor.

LAN Cable Connecter

（１０Mｂｐｓ/100Mbps Ethernet ）

DC POWER Connecter

BNC Connecter

（Analog Video Output）

Inside of Camera

B) Function Guide

＊ GPIO Connecter：MIC Input （MIC＋－）、Speaker input （SPEAKER＋－）、

Alarm output１/５V 100mm(GPIO９１, GND）、 Alarm output２/５V 100mm(GPIO80, GND）

＊ Factory Reset：Reset to factory setting, reset by pressing the button approximately 3

seconds while power is on to factory setting.

＊ ZOOM Control：Control and set magnification of the camera by the adjustment bar.

＊ FOCUS Control： Control and set focus of the camera by the adjustment bar.

Factory Reset Button

GPIO Connecter

Focus

Zoom

Lens Control

２－３ GPIO Connection Guide

２－３－１ Alarm Input and Output Guide

A) Output.

The only power (voltage/current) that can be connected directly to devices such as

alarm or/and warning light is DC 5V 100mmA. If using devices requiring higher voltage

and/or current, please purchase and use separate Reley switch. Alarm Output１/５V

100mm(GPIO９１, GND）,Alarm Output２/５V 100mm(GPIO９１, GND）。

３．Product Installation:

3－1 Camera Installation.

３－１－１ Installation Guide.

A) Install the camera as shown below. Please make sure the place is strong enough for

installing a camera.

a）Ceiling b）Wall

B) As Image Shown Bellow, Adjust PAN/TILT/HORIZONTAL of the Camera.

Ｃ）LAN Cable Connection

１＞ To decide IP address of the camera, prepare a desktop or a laptop.

＊ＯＳ：Windows 2000． Windows ＸＰ． Windows Ｖｉｓｔａ。

＊The initial ＩＰ address of the camera is １９２．１６８．１．１００ . Set the IP address of a

desktop or laptop as next: １９２．１６８．１．５ＳｅｂｎｅｔＭａｓｋ: ２５５．２５５．２５５．０

２＞ Connect the Network LAN cable of the camera.（Connecting ＰＣ directly to the

camera, use ＣＲＯＳＳＯＶＥＲ cable. Connecting through ＨＵＢ<Roｕｔｅｒ>, use ＤＩＲＥＣＴ

cable）

Horizontal

Rotation: 360°

PAN: 360°

TILT: 90°

FOCUS

ZOOM

（ＣＲＯＳＳＯＶＥＲ Cable）（ＤＩＲＥＣＴ Cable）

３＞ Connect PＯＷＥＲ adaptor.

４＞ Connect Sensor, Audio Mike, Cable of Speaker, only when necessary.

３－２ Setting IP Address of a Camera.

３－２－１ Changing IP Address of a Camera and Setting DHCP Address.

Ａ） The initial IP address of the Camera is １９２．１６８．１．１００. To change the IP address,

install the provided IP Finder Software to a PC. Then press SCAN on the right of the following

screen, all the IP address of Cameras presently connected to Sebnet will be shown. (Figure 1)

(Figure 1)

Ｂ）Clicking IP address of the camera, CONNECT and RESET Buttons will appear.

By pressing CONNECT button, will be connected to Web Viewer (browser) of the camera.

(Figure 2)

By pressing REST button, a window will appear. (Figure 3)

(Figure 2)

Ｃ）By selecting DHCP, IP address will be automatically assigned from a router. Or, IP

address can also be changed and sat manually by selecting Set Manually, by inputting Net

mask, Gateway, etc. and press OK.

(Figure 3)

４．Connect to Web viewer:

To view the camera through connecting network (internet), there are two

ways; by Web Viewer, or NVR Viewer. This manual only describes viewing

by connecting to Web Viewer. The description for viewing by connecting

to NVR Viewer is in the manual, located in the CD provided with the

product. Please refer to it.

４－1 Log-in.

A) As typing the IP address of the camera (192. 168. 1. 100) in the Address bar of

Internet Explorer window and pressing enter, following screen appears.

B) Inputting ID and Password, press Enter. Following screes appears. From factory setting,

Initial ID: admin, Password: 11111111.

Changing ID and Password, Camera Setup, etc. are described in the IP Camera & Setup

Manual located in the CD provided with the product. Please refer to it.

４－２ Specification of the Product＆Camera Diagram.

A) Specification of the Product

PONI-S100,P100-IVA Specifications

Image Device Progressive Scan CMOS

Size 1/3 inch

Scanning System

4:3 Progressive

Pixel Clock 27Mhz, NTSC/PAL

Total Pixel Array 762(H)X 504(V)

Pixel Size 6.35um X 7.4um

Effective Image

Area

4622.8um x 3611.2um

Dark Signal 12.0[mV/sec] @ 60°C

Dynamic Range 63.7 [db]

SNR 46.4 [db]

Functions Auto White Balance, Auto Exposure Control

Lens Built-In DC Iris Vari-focal Lens

System Main Processor 32 bit Embedded CPU

System Memory 64MB NAND Flash, 128MB DDR

Video/Audio

Compression D1 (704x480): MJPEG/H264

CIF(352x240) : MJPEG/H264

Dual Stream

Frame Rate Max 30 fps

Bit Rate 28K ~ 6M bps

image Settings Compression level setting, CBR/VBR

Audio Two-way (Full duplex/ ADPCM)

Network Protocol IPv4, TCP, UDP, RTSP, RTCP, HTTP, SMTP, FTP, DHCP,

DNS, ICMP, ARP

Web Browser Microsoft Internet Explorer 6.0 or above

Security Password protection: conﬁgured by the administrator

LAN Interface Ethernet (10/100 Base-T), RJ-45 Connector

Alarm/Event

Digital Output 2 TTL, terminal block

Video Analysis

Procesing

Object Detection &, Tracking,

Object Appear/Disappear

Fence/Area Alarm

Area Mask

B) Camera Diagram

４－３ System Scheme

A) PONI-S100-IVA

Location

B) PONI-P100-IVA

PRODUCTION

PONICO KOREA CORPORATION

ponico PONI-P100-IVA Installation guide

ponico PONI-P100-IVA Installation guide

Other documents