Asus TUF GAMING B760M-BTF WIFI User manual

Brand: Asus

Model: TUF GAMING B760M-BTF WIFI

Category: Motherboards

Type: User manual

Below you will find brief information for motherboard TUF GAMING B760M-BTF WIFI. This motherboard supports 13th and 12th Gen Intel Core processors, DDR5 memory, and has multiple M.2 slots for storage. It features a 2.5Gb Ethernet port and Wi-Fi 6 connectivity. The board also includes multiple USB ports, including USB 3.2 Gen 2x2. It offers extensive cooling options with multiple fan headers, and includes ASUS TUF PROTECTION features.

Motherboard

TUF GAMING

B760M-BTF WIFI

E22298

First Edition

August 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

iii

Contents

Safety information ...................................................................................................... iv

About this guide .......................................................................................................... v

Package contents ....................................................................................................... vi

TUF GAMING B760M-BTF WIFI specifications summary ....................................... vi

Chapter 1: Product Introduction

1.1 Before you proceed ...................................................................................... 1-1

1.2 Motherboard overview ................................................................................. 1-2

1.3 Central Processing Unit (CPU) .................................................................... 1-9

1.4 System memory .......................................................................................... 1-11

1.5 M.2 installation ............................................................................................ 1-13

1.6 Wi-Fi antenna installation .......................................................................... 1-16

Chapter 2: BIOS and RAID Support

2.1 Knowing BIOS ............................................................................................... 2-1

2.2 BIOS Setup program .................................................................................... 2-2

2.3 ASUS EZ Flash 3 ........................................................................................... 2-3

2.4 ASUS CrashFree BIOS 3 .............................................................................. 2-4

2.5 RAID configurations ..................................................................................... 2-5

Appendix

Notices ..................................................................................................................... A-1

Warranty ................................................................................................................... A-8

ASUS contact information .................................................................................... A-10

Service and Support ............................................................................................. A-10

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all power

cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding components, carefully read all the manuals

that came with the package.

• Before using the product, ensure all cables are correctly connected and the power cables

are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualified service

technician or your retailer.

• Your motherboard should only be used in environments with ambient temperatures

between 10°C and 35°C.

Button/Coin Batteries Safety Information

WARNING

KEEP OUT OF REACH OF CHILDREN

Swallowing can lead to chemical burns,

perforation of soft tissue, and death.

Severe burns can occur within 2 hours

of ingestion. Seek medical attention

immediately.

About this guide

This user guide contains the information you need when installing and configuring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it

supports. It includes descriptions of the switches, jumpers, and connectors on the

motherboard.

• Chapter 2: BIOS and RAID Support

This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility

and support on RAID.

Where to find more information

Refer to the following sources for additional information and for product and software

updates.

1. ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware

and software products.

2. Optional documentation

Your product package may include optional documentation, such as warranty flyers,

that may have been added by your dealer. These documents are not part of the

standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this user guide.

CAUTION: Information to prevent damage to the components and injuries to

yourself when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

TUF GAMING B760M-BTF WIFI specifications summary

CPU

Intel® Socket LGA1700 for 13th Gen Intel® Core™ & 12th Gen Intel® Core™,

Pentium® Gold and Celeron® Processors*

Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max

Technology 3.0**

* Refer to www.asus.com for CPU support list.

** Intel® Turbo Boost Max Technology 3.0 support depends on the CPU types.

Chipset Intel® B760 Chipset

Memory

4 x DIMM slots, Max. 192GB, DDR5 Non-ECC, Un-buffered Memory*

Dual Channel Memory Architecture

Supports Intel® Extreme Memory Profile (XMP)

OptiMem II

* Supported memory types, data rate (speed), and number of DRAM modules vary

depending on the CPU and memory configuration, for more information please

refer to CPU/Memory Support list under the Support tab of product information

site or visit https://www.asus.com/support/.

Non-ECC, un-buffered DDR5 memory supports On-Die ECC function.

Graphics

1 x DisplayPort**

1 x HDMI™ port***

* Graphics specifications may vary between CPU types. Please refer to

www.intel.com for any updates.

** Supports max. 4K@60Hz as specified in DisplayPort 1.4.

*** Supports 4K@60Hz as specified in HDMI™ 2.1.

Expansion Slots

Intel® 13th & 12th Gen Processors

1 x PCIe 5.0 x16 slot

Intel® B760 Chipset

1 x PCIe 4.0 x16 slot (supports x4 mode)

1 x PCIe 4.0 x1 slot

Note: To ensure compatibility of the device installed, please refer to

https://www.asus.com/support/ for the list of supported peripherals.

(continued on the next page)

Package contents

Check your motherboard package for the following items.

Motherboard 1 x TUF GAMING B760M-BTF WIFI motherboard

Cables 2 x SATA 6Gb/s cables

Miscellaneous

1 x ASUS Wi-Fi moving antenna

1 x M.2 Rubber package

1 x Screw package for M.2 SSD

1 x TUF Gaming sticker

Documentation 1 x User guide

1 x TUF Certification card

If any of the above items is damaged or missing, contact your retailer.

vii

TUF GAMING B760M-BTF WIFI specifications summary

Storage

Total supports 3 x M.2 slots and 4 x SATA 6Gb/s ports*

Intel® 13th & 12th Gen Processors

M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

Intel® B760 Chipset

M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

M.2_3 slot (Key M), type 2280 only (supports PCIe 4.0 x4 mode)**

4 x SATA 6Gb/s ports

* Intel® Rapid Storage Technology supports SATA RAID 0/1/5/10.

** The M.2_3 slot shares bandwidth with the PCIEX16(G4) slot. When you install a

device into the M.2_3 slot, the PCIEX16(G4) slot will be disabled.

Ethernet 1 x Realtek 2.5Gb Ethernet

Wireless &

Bluetooth®

Wi-Fi 6

2x2 Wi-Fi 6 (802.11 a/b/g/n/ac/ax)

Supports 2.4/5GHz frequency band

Bluetooth® v5.2*

* The Bluetooth version may vary, please refer to the Wi-Fi module manufacturer’s

website for the latest specifications.

USB

Rear USB (Total 10 ports)

1 x USB 3.2 Gen 2x2 (20G) port (1 x USB Type-C®)

2 x USB 3.2 Gen 2 (10G) ports (1 x Type-A + 1 x USB Type-C®)

3 x USB 3.2 Gen 1 (5G) ports (2 x Type-A + 1 x USB Type-C®)

4 x USB 2.0 ports (4 x Type-A)

Front USB (Total 7 ports)

1 x USB 3.2 Gen 2 (10G) connector (supports USB Type-C®)

1 x USB 3.2 Gen 1 (5G) header supports 2 additional USB 3.2 Gen 1 ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

* U32G1_E1, U32G1_E2, U32G1_E3, and U32G1_E4 share the bandwidth.

** USB_E5, USB_E6, USB_E7, and USB_E8 share the bandwidth.

Audio

Realtek 7.1 Surround Sound High Definition Audio CODEC*

- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking

- Supports up to 24-Bit/192 kHz playback

Audio Features

- Audio Shielding

- Dedicated audio PCB layers

* A chassis with an HD audio module in the front panel is required to support 7.1

Surround Sound audio output.

Back Panel I/O

Ports

1 x USB 3.2 Gen 2x2 (20G) port (1 x USB Type-C®)

2 x USB 3.2 Gen 2 (10G) ports (1 x Type-A + 1 x USB Type-C®)

3 x USB 3.2 Gen 1 (5G) ports (2 x Type-A + 1 x USB Type-C®)

4 x USB 2.0 ports (4 x Type-A)

1 x DisplayPort

1 x HDMI™ port

1 x Wi-Fi Module

1 x Realtek 2.5Gb Ethernet port

3 x Audio jacks

1 x Clear CMOS button

(continued on the next page)

viii

TUF GAMING B760M-BTF WIFI specifications summary

Internal I/O

Connectors

Fan and Cooling related

1 x 4-pin CPU Fan header

1 x 4-pin CPU OPT Fan header

1 x 4-pin AIO Pump header

3 x 4-pin Chassis Fan headers

Power related

1 x 24-pin Main Power connector

1 x 8-pin +12V Power connector

1 x 4-pin +12V Power connector

Storage related

3 x M.2 slots (Key M)

4 x SATA 6Gb/s ports

USB

1 x USB 3.2 Gen 2 connector (supports USB Type-C®)

1 x USB 3.2 Gen 1 header supports 2 additional USB 3.2 Gen 1 ports

2 x USB 2.0 headers support 4 additional USB 2.0 ports

Miscellaneous

3 x Addressable Gen 2 headers

1 x Aura RGB header

1 x COM Port header

1 x Front Panel Audio header (AAFP)

1 x 10-1 pin System Panel header

1 x Thunderbolt™ (USB4®) header

Special Features

ASUS TUF PROTECTION

- DIGI+ VRM (- Digital power design with DrMOS)

- ESD Guards

- TUF LANGuard

- Overvoltage Protection

- SafeSlot Core+

- Stainless-Steel Back I/O

ASUS Q-Design

- M.2 Q-Latch

- Q-DIMM

- Q-LED (CPU [red], DRAM [yellow], VGA [white], Boot Device [yellow

green])

- Q-Slot

ASUS Thermal Solution

- M.2 heatsinks

- VRM heatsink design

ASUS EZ DIY

- Clear CMOS button

- CPU Socket lever protector

- ProCool

- Pre-mounted I/O shield

- SafeDIMM

(continued on the next page)

TUF GAMING B760M-BTF WIFI specifications summary

Special Features

Aura Sync

- Aura RGB header

- Addressable Gen 2 headers

Software Features

ASUS Exclusive Software

Armoury Crate

- Aura Creator

- Aura Sync

- Fan Xpert 2+

- Power Saving

- Two-Way AI Noise Cancelation

AI Suite 3

- DIGI+ VRM

- PC Cleaner

TUF GAMING CPU-Z

DTS Audio Processing

MyASUS

Norton 360 for Gamers (60 Days Free Trial)

WinRAR

UEFI BIOS

ASUS EZ DIY

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 3

- ASUS UEFI BIOS EZ Mode

BIOS 128 Mb Flash ROM, UEFI AMI BIOS

Manageability WOL by PME, PXE

Operating System Windows® 11, Windows® 10 64-bit

Form Factor mATX Form Factor

9.6 inch x 9.6 inch (24.4 cm x 24.4 cm)

• Specifications are subject to change without notice. Please refer to the ASUS website

for the latest specifications.

• MyASUS offers a variety of support features such as helping to troubleshoot issues,

optimizing product performance, integrating ASUS software, and recovery drive

creation. Please scan the QR Code for installation guide and FAQ.

• For more information on downloading and installing drivers and utilities for your

motherboard, please scan the QR code below:

1-1

TUF GAMING B760M-BTF WIFI

Product Introduction

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, or components.

• The pin definitions in this chapter are for reference only. The pin names depend on the

location of the header/jumper/connector.

• For more information on installing your motherboard, please scan the QR code below:

Chapter 1: Product Introduction

1-2 Chapter 1: Product Introduction

1.2 Motherboard overview

Unplug the power cord before installing or removing the motherboard. Failure to do so can

cause you physical injury and damage motherboard components.

AAFP

COM_DEBUG_2

DDR5 DIMM_A1 (64bit, 288-pin module)

DDR5 DIMM_A2 (64bit, 288-pin module)

DDR5 DIMM_B1 (64bit, 288-pin module)

1st

DDR5 DIMM_B2 (64bit, 288-pin module)

DIGI+

VRM

AIO_PUMP CPU_OPT CPU_FAN

ATX_12V_1ATX_12V_2

CHA_FAN3 CHA_FAN2

CHA_FAN1

SATA6G_4

COM_DEBUG_1

F_PANEL

SATA6G_3

SATA6G_1

SATA6G_2

128Mb

BIOS

ATX_PWR

U32G2_C3

U32G1_E12

BATTERY

LAN_U32G2_E5

HDMI_DP

USB_E5678

U32G2X2_C1

U32G1_C9

U32G1_E4

U32G1_E3

Super

I/O

PCIEX1(G4)

22602280 2242

2280

2260 22802242

PCIEX16(G4)

PCIEX16(G5)

USB_78 USB_56

24.4cm(9.6in)

Intel®

B760

M.2_3(SOCKET3)

M.2_2(SOCKET3)

M.2_3(SOCKET3)

PCIE SATA

4.0 X4 X

M.2_1(SOCKET3)

PCIE SATA

4.0 X4 X

M.2_2(SOCKET3)

PCIE SATA

4.0 X4 X

ADD GEN 2_2

ADD GEN 2_3

ADD GEN 2_1

RGB_HEADER TB(USB4)_HEADER

COM

LGA1700

AUDIO

M.2(WIFI)

U32G2_EC6

CLRTC

CPU

DRAM

VGA

BOOT

Audio

Codec

Ethernet

24.4cm(9.6in)

11 4

6 2

715 4 10

4 5

11 16 13 14

AAFP

COM_DEBUG_2

DDR5 DIMM_A1 (64bit, 288-pin module)

DDR5 DIMM_A2 (64bit, 288-pin module)

DDR5 DIMM_B1 (64bit, 288-pin module)

1st

DDR5 DIMM_B2 (64bit, 288-pin module)

DIGI+

VRM

AIO_PUMP CPU_OPT CPU_FAN

ATX_12V_1ATX_12V_2

CHA_FAN3 CHA_FAN2

CHA_FAN1

SATA6G_4

COM_DEBUG_1

F_PANEL

SATA6G_3

SATA6G_1

SATA6G_2

128Mb

BIOS

ATX_PWR

U32G2_C3

U32G1_E12

BATTERY

LAN_U32G2_E5

HDMI_DP

USB_E5678

U32G2X2_C1

U32G1_C9

U32G1_E4

U32G1_E3

Super

I/O

PCIEX1(G4)

22602280 2242

2280

2260 22802242

PCIEX16(G4)

PCIEX16(G5)

USB_78 USB_56

24.4cm(9.6in)

Intel®

B760

M.2_3(SOCKET3)

M.2_2(SOCKET3)

M.2_3(SOCKET3)

PCIE SATA

4.0 X4 X

M.2_1(SOCKET3)

PCIE SATA

4.0 X4 X

M.2_2(SOCKET3)

PCIE SATA

4.0 X4 X

ADD GEN 2_2

ADD GEN 2_3

ADD GEN 2_1

RGB_HEADER TB(USB4)_HEADER

COM

LGA1700

AUDIO

M.2(WIFI)

U32G2_EC6

CLRTC

CPU

DRAM

VGA

BOOT

Audio

Codec

Ethernet

24.4cm(9.6in)

11 4

6 2

715 4 10

4 5

1211 16 13 14

1-3

1.2.1 Layout contents

1. CPU socket

The motherboard comes with a LGA1700 socket designed for 13th Gen Intel® Core™ & 12th

Gen Intel® Core™, Pentium® Gold and Celeron® Processors.

For more details, refer to Central Processing Unit (CPU).

2. DDR5 DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5

(Double Data Rate 5) memory modules.

For more details, refer to System memory.

3. Expansion slots

This motherboard supports two PCIe x16 graphics cards and one PCIe 4.0 x1 network cards,

SCSI cards or other cards that comply with the PCI Express specification.

4. Fan headers

The Fan headers allow you to connect fans to cool the system.

Header Max.

Current Max. Power Default Speed Shared

Control

CPU_FAN 1A 12W Q-Fan Controlled A

CPU_OPT 1A 12W Q-Fan Controlled A

CHA_FAN1 1A 12W Q-Fan Controlled -

CHA_FAN2 1A 12W Q-Fan Controlled -

CHA_FAN3 1A 12W Q-Fan Controlled -

AIO_PUMP 1A 12W Full-Speed -

5. Power connectors

These Power connectors allow you to connect your motherboard to a power supply. The

power supply plugs are designed to fit in only one orientation. Find the proper orientation and

push down firmly until the power supply plugs are fully inserted.

Ensure to connect the 8-pin power plug or connect both the 8-pin and 4-pin power plugs.

• We recommend that you use a PSU with a higher power output when configuring a

system with more power-consuming devices. The system may become unstable or

may not boot up if the power is inadequate.

• If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power

or above to ensure the system stability.

6. M.2 slots (Key M)

The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.

FAN PWM

FAN IN

FAN PWR

GND

FAN PWM

FAN IN

FAN PWR

GND

FAN PWR

FAN IN

FAN PWM

TUF GAMING B760M-BTF WIFI

1-4

• Intel® 13th & 12th Gen Processors

M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

• Intel® B760 Chipset

M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)

M.2_3 slot (Key M), type 2280 only (supports PCIe 4.0 x4 mode)

The M.2_3 slot shares bandwidth with the PCIEX16(G4) slot. When you install a

device into the M.2_3 slot, the PCIEX16(G4) slot will be disabled.

The M.2 SSD module is purchased separately.

7. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and

hard disk drives via SATA cables.

8. USB 3.2 Gen 2 Type-C® Front Panel connector

The USB 3.2 Gen 2 Type-C® connector allows you to connect a USB

3.2 Gen 2 Type-C® module for an additional USB 3.2 Gen 2 Type-C®

port on the front panel. The USB 3.2 Gen 2 Type-C® connector provides

data transfer speeds of up to 10 Gb/s.

The USB 3.2 Gen 2 Type-C® module is purchased separately.

9. USB 3.2 Gen 1 header

The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1

module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1

header provides data transfer speeds of up to 5 Gb/s.

The USB 3.2 Gen 1 module is purchased separately.

10. USB 2.0 headers

The USB 2.0 headers allow you to connect USB modules for

additional USB 2.0 ports. The USB 2.0 headers provide data

transfer speeds of up to 480 Mb/s.

DO NOT connect a 1394 cable to the USB connectors. Doing

so will damage the motherboard!

The USB 2.0 module is purchased separately.

11. Addressable Gen 2 headers

The Addressable Gen 2 headers allow you to connect individually addressable

RGB WS2812B LED strips or WS2812B based LED strips.

The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/

Ground), with a maximum power rating of 3A (5V), and the addressable headers on this

board can handle a combined maximum of 500 LEDs.

VBUS

TX1+

TX1-

GND

RX1+

RX1-

VBUS

CC1

CC2

D+

D-

GND

RX2-

RX2+

GND

TX2-

TX2+

VBUS

GND

IntA_P1_D+

IntA_P1_D-

GND

IntA_P1_SSTX+

IntA_P1_SSTX-

GND

IntA_P1_SSRX+

IntA_P1_SSRX-

USB3+5V

PIN 1

IntA_P2_D+

IntA_P2_D-

GND

IntA_P2_SSTX+

IntA_P2_SSTX-

GND

IntA_P2_SSRX+

IntA_P2_SSRX-

USB3+5V

ADD_GEN 2

+5V

Data

Ground

PIN 1

USB+5V

USB_P7-

USB_P7+

GND

USB+5V

USB_P8-

USB_P8+

GND

PIN 1

USB_78

USB+5V

USB_P5-

USB_P5+

GND

USB+5V

USB_P6-

USB_P6+

GND

PIN 1

USB_56

Chapter 1: Product Introduction

1-5

Before you install or remove any component, ensure that the power supply is switched off

or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the addressable RGB LED strip is

connected in the correct orientation, and the 5V connector is aligned with the 5V

header on the motherboard.

• The addressable RGB LED strip will only light up when the system is powered on.

• The addressable RGB LED strip is purchased separately.

12. Aura RGB header

The Aura RGB header allows you to connect RGB LED strips.

The Aura RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a

maximum power rating of 3A (12V).

Before you install or remove any component, ensure that the ATX power supply is switched

off or the power cord is detached from the power supply. Failure to do so may cause severe

damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip are connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

• The LED strip will only light up when the system is powered on.

• The LED strip is purchased separately.

13. COM Port header

The COM (Serial) Port header allows you to connect a COM port module.

Connect the COM port module cable to this header, then install the module to a

slot opening on the system chassis.

The COM port module is purchased separately.

14. Front Panel Audio header

The Front Panel Audio header is for a chassis-mounted front panel audio

I/O module that supports HD Audio. Connect one end of the front panel

audio I/O module cable to this header.

We recommend that you connect a high-definition front panel audio

module to this header to avail of the motherboard’s high-definition

audio capability.

COM

PIN 1

DCD

TXD

GND

RTS

RXD

DTR

DSR

CTS

AAFP

AGND

SENSE1_RETUR

SENSE2_RETUR

PORT1 L

PORT1 R

PORT2 R

SENSE_SEND

PORT2 L

HD-audio-compliant

pin definition

TUF GAMING B760M-BTF WIFI

1-6

15. System Panel header

The System Panel header supports several chassis-mounted functions.

• System Power LED header (+PWR_LED-)

The 2-pin header allows you to connect the System Power LED.

The System Power LED lights up when the system is connected to

a power source, or when you turn on the system power, and blinks

when the system is in sleep mode.

• Storage Device Activity LED header (+HDD_LED-)

The 2-pin header allows you to connect the Storage Device Activity

LED. The Storage Device Activity LED lights up or blinks when data

is read from or written to the storage device or storage device add-on card.

• Power Button/Soft-off Button header (PWR_BTN)

The 2 pin header allows you to connect the system power button. Press the power

button to power up the system, or put the system into sleep or soft-off mode

(depending on the operating system settings).

• Reset button header (RESET)

The 2-pin header allows you to connect the chassis-mounted reset button. Press the

reset button to reboot the system.

16. Thunderbolt™ (USB4®) header

The Thunderbolt™ (USB4®) header allows you to connect an

add-on card that supports Intel®’s Thunderbolt™ Technology or

USB4® function.

• The add-on card is purchased separately.

• Please visit the official website of your purchased add-

on card for more details on compatibility.

The add-on card can only be used when installed to the

PCIEX16(G4) slot. Ensure to install your add-on card to the

PCIEX16(G4) slot.

17. Q-LEDs

The Q-LEDs check key components (CPU, DRAM, VGA, and booting devices) during the

motherboard booting process. If an error is found, the critical component’s LED stays lit up

until the problem is solved.

The Q-LEDs provide the most probable cause of an error code as a starting point for

troubleshooting. The actual cause may vary from case to case.

PIN 1

PWR_BTN

PWR_LED+

PWR_LED-

PWR

GND

HDD_LED+

HDD_LED-

Ground

HWRST#

(NC)

F_PANEL

+PWR_LED-

+HDD_LED- RESET

PIN 1

FORCE_PWR

TB_CIO_PLUG_EVENT

SLP_S3#

SLP_S5#

GND

RTD3_SW

I2C_SCL

I2C_SDA

I2C_IRQ#

RTD3_POWER_EN

PERST_N

WAKE#

TB_HEADER

Chapter 1: Product Introduction

1-7

1.2.2 Rear panel connectors

8 10 11 13 14

54 6 71 2 3

912

1. DisplayPort. This port is for a DisplayPort-compatible device.

2. USB 2.0 ports. These Universal Serial Bus (USB) ports are for USB 2.0 devices.

3. USB 3.2 Gen 1 (up to 5Gbps) ports. These Universal Serial Bus 3.2 (USB 3.2) ports

are for USB 3.2 Gen 1 devices.

4. USB 3.2 Gen 2 (up to 10Gbps) port (teal blue, Type A). This Universal Serial Bus

3.2 (USB 3.2) port is for USB 3.2 Gen 2 devices.

5. 2.5Gb Ethernet port. This port allows 2.5Gbps Ethernet connection to a Local Area

Network (LAN) through a network hub. Refer to the table below for the Ethernet port

LED indications.

Realtek 2.5Gb Ethernet port LED indications

Speed LED

Status Description

OFF No link

GREEN 2.5 Gbps connection

ORANGE 1 Gbps / 100 Mbps /

10 Mbps connection

Activity Link LED

Status Description

OFF No link

GREEN Linked

BLINKING Data activity

ACT/LINK

LED

SPEED

LED

Ethernet port

6. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio

sources.

7. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel,

5.1-channel, and 7.1-channel configurations, the function of this port becomes Front

Speaker Out.

8. HDMI™ port. This port is for a High-Definition Multimedia Interface (HDMI™)

connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other

protected content.

TUF GAMING B760M-BTF WIFI

1-8

9. Clear CMOS button. This button allows you to clear the Real Time Clock (RTC) RAM

in the CMOS, which contains the date, time, system passwords, and system setup

parameters.

To erase the RTC RAM:

1) Turn OFF the computer and unplug the power cord.

2) Press the Clear CMOS button.

3) Plug the power cord and turn ON the computer.

4) Hold down the <Del> key during the boot process and enter BIOS setup to

re-enter data.

* DO NOT press the Clear CMOS button except when clearing the RTC RAM, doing so

will cause system boot failure!

** If the steps above do not help, remove the onboard button cell battery and press the

Clear CMOS button again to clear the CMOS RTC RAM data. After clearing the CMOS,

reinstall the button cell battery.

10. USB 3.2 Gen 2x2 (up to 20Gbps) port (USB Type-C®). This Universal Serial Bus 3.2

(USB 3.2) port is for USB 3.2 Gen 2x2 Type-C® devices.

11. USB 3.2 Gen 1 (up to 5Gbps) port (USB Type-C®). This Universal Serial Bus 3.2

(USB 3.2) port is for USB 3.2 Gen 1 Type-C® devices.

12. USB 3.2 Gen 2 (up to 10Gbps) port (USB Type-C®). This Universal Serial Bus 3.2

(USB 3.2) port is for USB 3.2 Gen 2 Type-C® devices.

13. Wi-Fi 6 ports. These ports connect to the bundled ASUS Wi-Fi moving antenna.

• Ensure that the ASUS Wi-Fi moving antenna is securely installed to the Wi-Fi ports.

• Ensure that the antenna is at least 20 cm away from all persons.

14. Microphone port (pink). This port connects a microphone.

Refer to the audio configuration table below for the function of the audio ports in 2, 4, 5.1, or

7.1-channel configuration.

Audio 2, 4, 5.1 or 7.1-channel configuration

Port 2-channel 4-channel 5.1-channel 7.1-channel

Light Blue

(Rear panel) -Rear Speaker

Out

Rear Speaker

Out

Rear Speaker

Out

Lime

(Rear panel)

Front Speaker

Out

Front Speaker

Out

Front Speaker

Out

Front Speaker

Out

Pink

(Rear panel) - - Center /

Subwoofer

Center /

Subwoofer

Lime

(Front panel) - - - Side Speaker Out

Pink

(Front panel) - - - -

To configure a 7.1-channel audio output:

Use a chassis with HD audio module in the front panel to support a 7.1-channel audio

output.

Chapter 1: Product Introduction

1-9

1.3 Central Processing Unit (CPU)

This motherboard comes with a LGA1700 socket designed for 13th Gen

Intel® Core™ &12th Gen Intel® Core™, Pentium® Gold and Celeron®

Processors.

Unplug all power cables before installing the CPU.

• Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT

install a CPU designed for LGA1155, LGA1156, LGA1151, and LGA1200 sockets on

the LGA1700 socket.

• ASUS will not cover damages resulting from incorrect CPU installation/removal,

incorrect CPU orientation/placement, or other damages resulting from negligence by

the user.

Installing the CPU

LGA1700

Take caution when lifting the load

lever, ensure to hold onto the load

lever when releasing the load

lever. Letting go of the load lever

immediately after releasing it may

cause the load lever to spring

back and cause damage to your

motherboard.

TUF GAMING B760M-BTF WIFI

1-10

Ensure to remove the CPU Socket lever protector on the lever latch before locking the lever

latch under the retention tab. Failure to do so may cause damages to your system when

installing the cooling system.

Chapter 1: Product Introduction

Page is loading ...

Asus TUF GAMING B760M-BTF WIFI User manual

Brand: Asus

Model: TUF GAMING B760M-BTF WIFI

Category: Motherboards

Type: User manual

Download PDF

report

in other languages

italiano: Asus TUF GAMING B760M-BTF WIFI Manuale utente
français: Asus TUF GAMING B760M-BTF WIFI Manuel utilisateur
română: Asus TUF GAMING B760M-BTF WIFI Manual de utilizare

Asus TUF GAMING B760M-BTF WIFI User manual

Asus TUF GAMING B760M-BTF WIFI User manual

in other languages

Related papers

Other documents