2. ML Accessories
  3. TRKDE1S

ML Accessories TRKDE1S User manual

  • Hello! I have analyzed the provided Installation & Maintenance Manual for track connectors, specifically models TRKCxx, TRKFCxx, TRKRAxx, TRKTxx, and TRKXxx I see it describes how to install them. It also points out that track connectors can be used as power feeds and rewired if needed. I'm here to answer any questions you might have about this guide.
  • What is the purpose of the polarity groove?
    Can the track connectors be rewired?
    What are the supported models?
Polarity groove
Earth conductor
Remove one earth tab
Fig. 1
• The track connectors TRKCxx / TRKFCxx / TRKRAxx / TRKTxx / TRKXxx also have the two earth tabs
and can be used as power feeds and rewired if required
SPOTLIGHT INSTALLATION
• Align the arrows on the spotlight track adaptor with the polarity groove on the track, push into the
track and rotate anti-clockwise (see Fig. 2). The polarity groove is a shallow groove on the surface
on one side the of the track
Fig. 2
• Insert a suitable GU10 lamp or G9 lamp for the TRKSP6xx
• Switch on and check for correct operation
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
Polarity groove
/