2. ROOMS TO GO
  3. 15511264

ROOMS TO GO 15511264, 15511252 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the SWSU 1123 Rocker Recliner. This document provides step-by-step instructions for assembling the recliner, including attaching the arm pillows, backrest, and seat using the provided hardware. I am ready to answer any questions you might have about the assembly process or the parts included.
  • How many people are recommended for assembly?
    What hardware is included?
    What are the main parts to be assembled?
Assembly Instructions
No Descrition Hardware Q'TY
M8 x 32mm Diameter
Thread Clamding Star knob 4 Pcs
Stud M8 X 90MM
SWSU
A
B
4 Pcs
Manufactured for Rooms To Go
C
D
E
F
Left Arm Pillow
Right Arm Pillow
Backrest
1 Pc
1 Pc
1 Pc
1 Pc
Seat
Page 1
1123 ROCKER RECLINER SKU#15511240
SKU#11511234
SKU#15511238
SKU#15511252
SKU#15511264
Assembly Instructions
Step 1: Step 2:
Step 3:
***Caution: Please read all instructions carefully before starting the assembly process. These parts are
cumbersome and heavy. Therefore, two people are recommended in order to prevent personal injury and
insure the parts are not damaged during the assembly.
SWSU
Manufactured for Rooms To Go
Page 2
CD
*Take out the part C from bottom.
Place the arm pillow Right into the arm rest.
ii
i
A
B
iii
Take out
from bottom
C
B
B
B
B
Step 4:
*Install the backrest E by positioning the female metal
receiver bracket over the male metal posts.
Pull Open
E
F
Tighten up part A with part B.
*Tie up part A into the arm pillow.
1123 ROCKER RECLINER SKU#15511240
SKU#11511234
SKU#15511238
SKU#15511252
SKU#15511264
/