2. Blue Ox
  3. BX88322

Blue Ox BX88322 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Blue Ox BX88322 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
BX88322
EZ Light Wiring Harness
Installation Instructions
405-0548 Rev A Page 1 of 2 10/5/15
1. Remove the vehicles tail light housings on both the
driver and passenger side by removing the fasteners
holding them into place. Pull the tail light housings
away from the vehicle, being careful not to break the
alignment tabs or housing.
2. Find and clean an area on driver side behind the tail
light for the converter box. Mount the converter box
using the double stick tape provided.
3. Disconnect the wiring harness from both tail lights. Plug
the wiring kit end with the yellow wire into the mating
plugs on the driver side taillight connector and the vehicle wiring harness connector.
4. Route the wiring kit end with the green wire to the passenger side.
5. Plug the wiring kit end with the green wire into the mating plugs on the passenger side taillight
connector and the vehicle wiring harness connector.
6. Secure all loose wiring to vehicle with zip ties.
7. Route4-wayatharnesstowardsthefrontofthevehiclesecuringwithzipties.
8. Reinstall the tail light housings to the vehicle, positioning the wire harness between the housing
and the vehicle body. Secure the remainder of the wiring harness in a secure area with zip ties.
9. Installthe4-atharnessintothe4-wayatbracketorcutofftheharnessplugandsplicethe
wires into the preferered style of trailer plug socket.
10. Mountthe4-wayatbracketorsocketinaconvenientlocationatthefrontofthevehicle.
11. Locateasuitablegroundingpointneartheconnector.Cleandirt,paintandanyrustproong
material from the area. Drill a 3/32” hole and secure the white wire with ring terminal using the
screwprovided.Donotdrillintoanyexposedsurfacesorthevehicleoororbed.
12. Applyasmallamountofdielectricgreasetothe4-wayatterminalstopreventcorrosion.
13. Connect to the RV electrical system and test all functions with the engine running to ensure
proper operation.
BX88322
EZ Light Wiring Harness
Installation Instructions
405-0548 Rev A Page 2 of 2 10/5/15
CUSTOMER SERVICE COMMITMENT
Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime
with our products. Our team is here to assist you with any questions you may have regarding the
performance of your product. Simply call (402) 385-3051 and you can speak with our customer care
team.
Additionally, please visit our website to see which rallies our Destination America team will be
attending. For a nominal fee, our service technician will service your towing system to ensure it’s in
proper working condition. Also, as a commitment to our customers, should you visit our factory, you
can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.
Again,thankyouforbeingourcustomerandforthecondenceyouhaveshownintheperformance
of our products. It is because of customers like you we enjoy the success we have today.
© 2015 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.com
/