Iron Logic Z-2 RF-1996 User manual

  • Hello! I have reviewed the user manual for the IronLogic Z-2 RF-1996 RFID reader. This document provides information on how to use the reader to interact with RFID tokens and Z-series locks. I've noted key features like its capability to work with EM-Marine and Atmel T5557 tokens, its USB-powered operation, and its ability to access lock memory. If you have any questions about setting up the device, its specifications, or general usage, feel free to ask!
  • What token types are supported?
    Can the device be used standalone?
    What is the maximum token reading distance?
    How do I connect to locks?
    What is included in package?
1.OVERVIEW
. FEATURES
. CONNECTION
2
3
Z-2RF-1996,referredtofurtheras “Adapter”,isusedfor:
1) AcquiringtheserialnumbersfromEM-Marineand Atmel T5557(Temic)contactlesstokens
(tokens,keyfobsetc.)andtransferringthemintoPCsviaUSBinterface.
2) Writinginformationintoprotectedmemoryblocksof Atmel T5557(Temic)cards.
AccessingmemoryofZ-serieslockswithaccesscontrolfunction(
,Z-9,Z-Eurolocketc.)includingwritingandreadinginformationabouttokens(cards)
serialnumbers,downloadingevents,settingclocksandparametersandupdatingthelocks
firmware.
Automaticdetectionoftokenstandards.
CanbeusedinservicingZ-serieslockswithaccesscontrolfunction(seewww.ironlogic. for
details).
Forlockservicing, “Lock'sCommander” and “Lock'sManager” softwarearerecommended
(seewww.ironlogic. ).
PoweringandmanagementisdoneviaUSB,thereforestandaloneoperationisnotpossible.
Userscanupgradethefirmware.
Connectthe toanavailableUSBportonthePC,viasuppliedUSB A/Bcable.
Installthedriversfromasupplieddisk.
allZ-serieslocksand
Eurolock
me
me
reader
DesktopRFIDreader
Z-2RF-1996 www.ironlogic.me
Z-2RF-1996
DesktopRFIDreader/writer/communicator125KHz
forIronLogicRFIDlocksmaintenance
UserManual
page1
110
80 25
4. OPERATION.
5.SPECIFICATIONS
6.PACKAGECONTENTS
After the drivers are installed, a new virtual COM port will be detected on the PC, through which the
information will be exchanged with that PC.
When working properly, 's LED shines red, indicating that it is powered on.
When a token is brought into 's working zone, the LED will shortly change colour to green and
a buzzer will sound.
While the token stays within working zone, the red LED is on.
The information exchange session between a token and is controlled by software. Either
only token serial number is read, or data are read or written from/to Temic token memory.
To work with locks, an additional antenna is used, which is located on the bottom side of the
and marked by a sticker. With this antenna, brought up to the lock, the will connect to the lock
controller.
After connection is established, the software may: download the events, write the card codes, set
up the controller operation modes and update its firmware.
The operation is described in details in the documentation for the corresponding software.
Workingfrequency: .........................................................................................125kHz.
Abilitytowriteinto T5557tokenmemory: ........................................................Present.
Supportedtokentypes: ........................................................EM-Marine, Atmel T5557.
Max.tokenreadingdistance: ...............................................................................4cm.
Lockconnectiondistance: ..............................................................................1…2cm.
PCinterface: .........................................................................................................USB.
tocomputerdistance: ....................................................................max.1.8m.
Cardreadingindication: ...............................................buzzersound,bicolouredLED.
Power: .......................................................................................poweredbyUSBport.
Casingmaterial: .............................................................................ABScoatedplastic.
Dimensions,mm: ....................................................................................110x80x25.
Weight: ........................................................................................................max180g.
-Z-2RF-1996 .......1
-Windowsdriversdisk .............................1
-USB A/Bcable .......................................1
reader
reader
reader
reader
reader
reader
Reader
DesktopRFIDreader
page2
Z-2RF-1996 www.ironlogic.me
7. OPERATIONAL CONDITIONS
8LIMITEDWARRANTY.
Recommendedairtemperature:5…40°C.
Humidity: ≤ 80%at25°C.
Ifoperationalconditionsaredifferingfromdescribedabove,devicespecificationscandeviate
fromspecifiedvalues.
Thecontrolleristobeoperatedinabsenceof:precipitation,directsunlight,sand,dust,water
condensation.
Thisdeviceiscoveredbyalimitedwarrantyfor24monthsfromthedateofsale.
The warranty becomes void if:
- This Manual is not followed;
- Device has physical damage;
- Device has visible traces of exposure to moisture and aggressive chemicals;
- Device circuits have visible traces of being tampered with by unauthorised parties.
Under active warranty, the Manufacturer will repair the device or replace any broken parts, FREE of
charge, if the fault is caused by manufacturing defect.
9. IRONLOGIC CONTACTS
Headquarters:
Developmentandproduction:
AuthorizedrepresentativeintheEuropeanUnion:
RFEnabledIDLimited
34ElyPlace,London,EC1N6TD,UK
AVSLLC
7,Bobruiskayastreet,Saint-Petersburg,195009,RussianFederation
Phone:+78122411853;+78125421185
www.ironlogic.ru
SIA IRONLOGIC
79A,Slokasiela,LV-1007,Riga,Latvia
Phone:+37166181894;+37124422922
www.ironlogic.me
page3
Z-2RF-1996 www.ironlogic.me
The symbol of crossed-throught waste bin on wheels means that the product
must be disposed of at f separate collection point. This also applies to the product
and all accessories marked with this symbol. Products labeled as such must not
be disposed of with normal household waste, but should be taken to a collection
point for recycling electrical and electronic equipment. Recycling helps to reduce
the consumption of raw materials, thus protecting the environment.
/