LOOQS Mee Frame User manual

Brand: LOOQS

Model: Mee Frame

Category: Digital photo frames

Type: User manual

User Guide MeeFrame 2

Safety Instructions and Precautions

Please read the safety instructions and precautions below carefully before

using MeeFrame.

Installation Safety Precautions

Use grounded socket/outlet.

Use rated voltage as indicated in the manual.

Place MeeFrame where there is good ventilation condition.

Do not place MeeFrame where it could be exposed to high temperature

or direct sun light.

Install where there is no electromagnetic interference.

Do not put wet or heavy objects on MeeFrame.

Do not install or leave MeeFrame, power cable, or LAN cables in pass

through areas.

Do not install MeeFrame where there is moisture (eg. bathroom, rain, or

splashes of water).

Do not place MeeFrame near any magnetic objects.

Keep MeeFrame out of reach from infants or children.

Only use good quality standard cables.

Install on a level and stable surface.

Do not install where the product may fall.

Power Precautions

Do not use multiple power plugs on a single socket and make sure that

the plugs are inserted fully so they may not move.

Do not touch power plug with wet hands.

Make sure power cable is not forcefully bent, pulled, or pressed by heavy

objects.

Unplug the power cable and store it separately when not in use for a

prolonged period of time

Unplug the power cable and disconnect the power during lightening

and thunder strikes.

Do not use damaged power cable, plug, or worn out socket.

User Guide MeeFrame 3

Handling Precautions

Do not insert foreign object through product vents and holes.

Keep product packaging materials out of reach of children.

Do not place containers of liquids such as water, juice, or coffee on the

product.

Disconnect power plug before cleaning, and do not splash with water

directly, or wipe with benzene, thinner, or alcohol

If you detect smoke or any abnormal smell from the product,

immediately disconnect and remove the power cable from the product

and contact our customer service center.

Do not block the product’s vents.

Keep product packaging materials out of reach from infants and

children.

Be careful in handling product packaging materials, there are sharp

corners.

Power off the product and disconnect power cable before moving the

product, and do not move the product during use.

Do not drop product and do not apply any impact to the product.

Do not disassemble, repair, or modify the product.

Do not use within a vehicle.

User Guide MeeFrame 4

FCC Notice – Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

User Guide MeeFrame 5

Product Specifications

Product Name: LOOQS MeeFrame – MF-801W

Display: 8” Touchpanel LCD Screen

800 x 600 Pixels

Internal Storage: 1 GB Flash Memory

Connectivity: 1 x Slot SD/MMC-Card Slot

1 x USB2.0 Port Typ A for connecting external drive

1 x USB2.0 Mini-B Port for connecting PC

1x DC Input

1x Mini-Stereo Line-out

Network Interface: 802.11b/g WLAN (supports WPA/WPA2/WEP Security)

Photo Support: JPEG / BMP / GIF / PNG

Audio Support: MP3 / WMA / PCM

Dimensions: 229 mm x 189 mm x 30 mm (WxHxD)

Weight: 0.7 kg

Power: Power Input: AC 100 V~240 V, 50/60 Hz, 0.3 A

Power Output: DC 12 V, 1.2 A

Certifications: CE, FCC, RoHS

User Guide MeeFrame 6

Table of Contents

SAFETY INSTRUCTIONS AND PRECAUTIONS.......................................................................2

FCC NOTICE – CLASS B........................................................................................................4

PRODUCT SPECIFICATIONS.................................................................................................5

1. GETTING STARTED.......................................................................................................8

CONTENT OF MEEFRAME PACKAGE........................................................................................ 8

EXAMINING MEEFRAME ......................................................................................................... 9

SETTING UP THE STAND.......................................................................................................... 10

PREPARING THE REMOTE CONTROL ....................................................................................... 10

POWERING ON MEEFRAME .................................................................................................. 10

USING THE TOUCH-PANEL LCD SCREEN................................................................................. 11

SELECTING YOUR LANGUAGE................................................................................................ 12

CONNECTING TO YOUR WIRELESS NETWORK .......................................................................... 13

INSERTING MEDIA................................................................................................................. 15

2. VIEWING YOUR PHOTOS..........................................................................................17

INTERNAL MEMORY .............................................................................................................. 17

USB STORAGE DEVICE......................................................................................................... 18

SD CARD ........................................................................................................................... 18

MEEBOX............................................................................................................................. 18

MEECHANNEL..................................................................................................................... 19

FLICKR ................................................................................................................................ 20

PICASA............................................................................................................................... 21

3. BEYOND PHOTOS.....................................................................................................23

WEATHER............................................................................................................................ 23

MUSIC ................................................................................................................................ 23

INTERNET RADIO .................................................................................................................. 24

NEWS & INFO...................................................................................................................... 25

CLOCK............................................................................................................................... 26

4. UTILITIES .....................................................................................................................27

MEMORY ............................................................................................................................ 27

FILE MANAGER.................................................................................................................... 27

User Guide MeeFrame 7

5. SETUP .........................................................................................................................28

GENERAL ............................................................................................................................ 28

SLIDESHOW ......................................................................................................................... 28

NETWORK ........................................................................................................................... 28

WEATHER............................................................................................................................ 29

TIME ................................................................................................................................... 29

TOUCH ............................................................................................................................... 29

PRODUCT REGISTRATION...................................................................................................30

WARRANTY..........................................................................................................................31

COPYRIGHT.........................................................................................................................33

LICENSING ..........................................................................................................................33

User Guide MeeFrame 8

1. Getting Started

Content of MeeFrame package

Examine the content of your MeeFrame package to make sure each of the

items shown below is included.

MeeFrame Back Stand Power Adapter

Stylus Remote Control Bezels

USB Cable User Manual CD Quick Start Guide

User Guide MeeFrame 9

Examining MeeFrame

Front

1. Touch panel LCD Screen

2. Exchangeable bezel

3. Remote control sensor

Back

1. Stylus

2. Speakers

3. Wall-mounting holes

4. Media card slot cover

5. Stand

6. SD/MMC card slot

7. USB Type A slot

Underside

1. DC In

2. Mini Stereo port

3. USB Mini-B port

4. Power switch

User Guide MeeFrame 10

Setting up the stand

Screw in the stand into the slot on the backside of MeeFrame.

Preparing the remote control

Remove the plastic film to begin using the remote control.

Powering on MeeFrame

Connect the AC adaptor to the power port on MeeFrame and plug the

adaptor into an electrical outlet. Then set the power switch on the underside

of MeeFrame to the On position.

User Guide MeeFrame 11

Using the touch-panel LCD screen

MeeFrame is equipped with a touch-panel LCD screen. Once you power on

MeeFrame, you will see a graphical user interface that responds to tapping

and sliding directly on the screen. You can use your finger or the stylus found

in the slot at the topside of MeeFrame.

From anywhere in the graphical user interface of MeeFrame, you can tap on

the LOOQS logo on the upper left corner to return to the Main Menu screen.

Tap on the Return button to return to the previous screen of the user

interface.

Note: Using your finger on the touch-panel LCD screen will leave finger prints

on the display surface. Before cleaning the LCD screen, power off

MeeFrame.

User Guide MeeFrame 12

Selecting your language

The MeeFrame user interface can be set to one of eight languages (English,

Dutch, French, Italian, Spanish, German, Greek, and Portuguese).

1. Tap Setup→General. (General Setup screen appears.)

2. Tap the language dropdown menu, and select the language of your

choice.

3. Tap the Apply button.

User Guide MeeFrame 13

Connecting to your wireless network

MeeFrame is a wireless digital photo frame. In order to enjoy all of the

features of MeeFrame, you need to connect MeeFrame to a wireless network

that allows MeeFrame to access the Internet.

Before you connect MeeFrame to the wireless network, determine whether

your network is set up to assign IP addresses automatically by a DHCP server

or to require a manual entry of static network information. If the former, follow

the steps for the DHCP network. Otherwise, follow the steps for the Static

network.

DHCP Network

1. Tap Setup→Network. (Network Setup screen appears.)

2. At the Network Setup screen, tap the Connect button.

3. Tap DHCP. (The access point selection screen appears.)

4. Select the wireless access point of your choice and tap the Connect

button.

5. Enter the security key and tap the Connect button if required by your

wireless access point.

6. Verify the network information. (Once connected, you will see a

Network Setup screen populated with network information.)

Static Network

1. Tap Setup→Network. (Network Setup screen appears.)

2. At the Network Setup screen, tap the Connect button.

3. Tap Static. (The network information screen appears.)

4. Enter the network information using the onscreen keyboard and tap the

Apply button. (The access point selection screen appears.)

User Guide MeeFrame 14

5. Select the wireless access point of your choice and tap the Connect

button.

6. Enter the security key and tap the Connect button if required by your

wireless access point.

7. Verify the network information. (Once connected, you will see a

Network Setup screen populated with network information.)

Note: If you wish to disconnect and re-connect to the same or another

network, tap Setup→Network and then click the Disconnect button at the

Network Setup screen. This allows you to start over with the network setup.

Note: If your wireless network is set up to hide the SSID, tap the Add Network

button at the access point selection screen and enter the information about

your network before proceeding to the next step.

Note: Once the network is set up, MeeFrame will attempt to connect to the

same network the next time it powers up.

User Guide MeeFrame 15

Inserting media

You can also display photos or play music from external media plugged into

MeeFrame or the internal memory.

You can connect a USB storage device (USB memory stick or a USB hard

drive) by plugging it into the USB Type A port behind the media slot cover.

You can also insert an SD Card into the slot behind the media slot cover.

User Guide MeeFrame 16

In order to store music or photos in the internal memory of MeeFrame,

connect MeeFrame to your PC by using the USB cable supplied with your

MeeFrame as shown in the illustration. Once connected, MeeFrame will

display the screen shown here and you will be able to access the internal

memory of MeeFrame just like any USB storage device. We recommend

storing your photos under the PHOTO folder and music under the MUSIC

folder. You can also create subfolders and organize your media content

within them. When you have finished copying or organizing your media files in

MeeFrame’s internal memory, disconnect the USB cable, and MeeFrame will

return to its normal operating state.

User Guide MeeFrame 17

2. Viewing Your Photos

Internal memory

In order to view the photos stored in MeeFrame’s internal memory, tap

Photos→Internal Memory. Navigate to the folder where you have stored the

photos you wish to view. The thumbnail of the content will be displayed. You

can tap on a single photo you wish to view or tap the Start Slideshow button

to view all of the photos in the folder as a slideshow.

Note: The photos can be viewed in two modes— slideshow or static. In the

Slideshow mode, you can tap on the photo to stop the slideshow and enter

the static mode. In the static mode, you can advance to the next photo, go

back to the previous photo, restart the slideshow, or exit from the photo

viewer.

Note: The transition effect in the slideshow can be adjusted in the Slideshow

Setup screen.

Note: The slideshows can be controlled using the remote control.

User Guide MeeFrame 18

USB Storage Device

In order to view the photos on a USB storage device, connect the media

device to the USB Type A port behind MeeFrame’s media slot cover. Once

the USB storage device is ready, you will see the USB icon light up at the

bottom of the MeeFrame user interface. Tap Photos→USB drive. Navigate to

the folder where you have stored the photos you wish to view. The thumbnail

of the content will be displayed. You can tap on a single photo you wish to

view or tap the Start Slideshow button to view all of the photos in the folder

as a slideshow.

SD/MMC Card

In order to view the photos on a SD or MMC Card, insert the card in the

SD/MMC Card slot behind MeeFrame’s media slot cover. Once the SD/MMC

Card is ready, you will see the SD Card icon light up at the bottom of the

MeeFrame user interface. Tap Photos→SD Card. Navigate to the folder where

you have stored the photos you wish to view. The thumbnail of the content

will be displayed. You can tap on a single photo you wish to view or tap the

Start Slideshow button to view all of the photos in the folder as a slideshow.

MeeBox

If you have your MeeFrame connected to the same network as your

MeeBox, you can view the photos stored in your MeeBox. Tap

Photos→MeeBox. Navigate to the folder where you have stored the photos

you wish to view. The thumbnail of the content will be displayed. Depending

on your network speed and the size of the photo files, it may take a few

minutes in order for the thumbnails to appear. You can tap on a single photo

you wish to view or tap the Start Slideshow button to view all of the photos in

the folder as a slideshow.

Note: In order to view the photos stored in your MeeBox, MeeBox’s UPnP

media server must be enabled.

User Guide MeeFrame 19

MeeChannel

MeeChannel.com is an online media sharing service where you can upload

photos, create albums, and share with others. Each MeeChannel account

can be associated with one or more MeeFrames. In order to view the photos

streamed from your MeeChannel account on MeeFrame, tap

Photos→MeeChannel. If your MeeFrame is not associated with a

MeeChannel account, you will see a message instructing you to register the

MeeFrame with your MeeChannel account. You can register your MeeFrame

according to the steps below:

1. Using an Internet browser, go to www.MeeChannel.com.

2. Log in to your MeeChannel account. (If you do not have a MeeChannel

account, first create an account at the main page.)

3. Using the same browser window, go to www.MeeChannel.com/register .

4. At the MeeFrame registration page, register a MeeFrame using the serial

number.

Once a MeeFrame is registered, you will see the MeeChannel screen when

you tap Photos→MeeChannel. At the MeeChannel screen, you can select

one of the following: My Photos, Shared Photos, or Public Photos.

Under My Photos, you can choose to view All Photos or select a particular

album. When you select All Photos or an album, the thumbnails of the

photos will appear. Select and tap any photo to begin the slideshow from

that photo. There is no static viewing mode for MeeChannel.

Under Shared Photos, selecting one of the friends will display your friend’s

photos.

To display the public photos available on MeeChannel.com, tap Public

Photos at the MeeChannel screen.

You can send a photo message from a MeeChannel account to another

MeeChannel account. Each MeeChannel account is also associated with an

email address so that photos can be sent to a MeeChannel account using

email. When a new photo arrives at a MeeChannel account, all the

User Guide MeeFrame 20

MeeFrames registered with this account that are connected to the Internet

will display a New Message icon at the bottom of the user interface.

Flickr

You can stream and view photos from multiple Flickr accounts. In order to do

so, you must first add Flickr account information to MeeFrame. You can add

up to five Flickr accounts. Each account can be added for public access or

private access. The public access mode only allows MeeFrame to display the

Flickr photos that are designated for public viewing. The private access

mode allows MeeFrame to display all photos in the Flickr account.

To add Flickr accounts in the public access mode, follow the steps below:

1. Tap Photos→Flickr. (Flickr screen appears.)

2. Select one of the empty account icons and tap the Add User button .

3. Select Public access as the access type.

4. Enter the Flickr ID or the email address associated with the Flickr

account.

5. Tap the Add button.

To add Flickr accounts in the private access mode, follow the steps below:

1. Tap Photos→Flickr. (Flickr screen appears.)

2. Select one of the empty account icons and tap the Add User button .

3. Select Private access as the access type.

4. From your PC connected to the Internet, enter the URL shown at the

bottom of the MeeFrame screen and obtain the 9-digit authorization code.

5. Enter the authorization code in the ID field.

6. Tap the Add button.

User Guide MeeFrame 21

Once you have added the Flickr user accounts, you will see the account’s

profile photos in the Flickr screen. To view the photos in a Flickr account that

has been added to MeeFrame, tap Photos→Flickr and select the profile

photo associated with the account. You can select to view the photos from

this user by tapping Photos, or tap on Contacts to view the photos that

belong to this user’s contacts. Under Photos, you can choose to view All

Photos or select a particular album. When you select All Photos or an album,

the thumbnails of the photos will appear. Select and tap any photo to begin

the slideshow from that photo. There is no static viewing mode for Flickr.

During the slideshow, tap on the screen to stop the slideshow and return to

the thumbnail screen.

Picasa

You can stream and view photos from multiple Picasa accounts. In order to

do so, you must first add Picasa account information to MeeFrame. You can

add up to five Picasa accounts. Each account can be added for public

access or private access. The public access mode only allows MeeFrame to

display the Picasa photos that are designated for public viewing. The private

access mode allows MeeFrame to display all photos in the Picasa account.

To add Picasa accounts in the public access mode, follow the steps below:

1. Tap Photos→Picasa. (Picasa screen appears.)

2. Select one of the empty account icons and tap the Add User button .

3. Select Public access as the access type.

4. Enter the Picasa ID or the email address associated with the Picasa

account.

5. Tap the Add button.

User Guide MeeFrame 22

To add Picasa accounts in the private access mode, follow the steps below:

1. Tap Photos→Picasa. (Picasa screen appears.)

2. Select one of the empty account icons and tap the Add User button .

3. Select Private access as the access type.

4. Enter the Picasa ID or the email address associated with the Picasa

account.

5. Enter the password associated with the account.

6. Tap the Add button.

Once you have added the Picasa user accounts, you will see the account’s

profile photos in the Picasa screen. To view the photos in a Picasa account

that has been added to MeeFrame, tap Photos→Picasa and select the

profile photo associated with the account. You can select to view the photos

from this user by tapping Photos, or tap on Contacts to view the photos that

belong to this user’s contacts. Under Photos, you can choose to view All

Photos or select a particular album. When you select All Photos or an album,

the thumbnails of the photos will appear. Select and tap any photo to begin

the slideshow from that photo. There is no static viewing mode for Picasa.

During the slideshow, tap on the screen to stop the slideshow and return to

the thumbnail screen.

User Guide MeeFrame 23

3. Beyond Photos

MeeFrame is designed to do much more than display photos. All of the extra

features are within reach from the Main Menu.

Weather

Tap Weather to view the weather information for today in a pre-selected city

and the forecast for the next two days. The city must be selected at the

Setup screen as described in page 29.

Music

You can listen to music that are stored in the internal memory or external

media. Tap Music from the Main Menu, and select the source. Then navigate

to the music file you want to play. The music will play immediately. Use the

control button below to stop, pause, fast forward, rewind, or go to the

previous or next track. You can also use the

While the music is playing, you can go back to the Main Menu and display

photos. In order to adjust the volume, tap on the speaker icon at the bottom

left of the MeeFrame user interface and use the slide control.

User Guide MeeFrame 24

Note: While the music is playing, you can click the Add Alarm button to

5MB.

Note: Music playback can also be controlled using the remote control.

Internet Radio

When connected to the Internet, MeeFrame can stream music from Internet

radio stations. MeeFrame streams from Shoutcast server-based radio stations.

To use the Internet Radio, tap Internet Radio and select Shoutcast, then one

of the genres. MeeFrame will download the list of stations available in the

selected genre. Tapping on one of the stations will immediately start the

buffering process, and you will soon hear the radio broadcast. Tap the pause

button in order to stop the broadcast.

You can also add a radio station to your Favorites list by tapping the heart

icon while the station is playing. To add a radio station to your Favorites list by

using a URL, tap on the Add Station icon, enter the URL, and tap on the Add

button. You can also remove the stations from your Favorites list by tapping

on the Remove Station icon while the radio station is selected.

User Guide MeeFrame 25

While the Internet Radio is playing, you can go back to the Main Menu and

display photos. In order to adjust the volume, tap on the speaker icon at the

bottom left of the MeeFrame user interface and use the slide control.

News & Info

MeeFrame also can display RSS feed from various sources of news and

information. Tap News & Info and select one of the sources on the left and

select the category on the right. When you see a list of headlines, tapping on

one of the headlines will display the news or information on the lower half of

the screen.

User Guide MeeFrame 26

Clock

You can use MeeFrame as a digital alarm clock. Tap on Clock to view the

time. You can set the time at the Time setup screen as described in page 29.

You can set up to three alarms. Tap on one of the alarm icons to set the

alarm. Each alarm can be configured to go off on specific days. In order to

use the music file that is registered as an alarm sound in the Music screen,

select User in the Sound field. Once you check the Enable field and save the

alarm setting, you will see the alarm icon light up.

User Guide MeeFrame 27

4. Utilities

Memory

Tap on Utilities→Memory and you will the memory management screen. Here

you can view the status of the internal memory and also format the internal

memory.

File Manager

Tap on Utilities→File Manager for rudimentary management of the files in the

internal memory. From this interface you can only delete the files you do not

want on MeeFrame. In order to copy, move, or organize the files in the

internal memory, connect MeeFrame to the PC as described in page 15.

User Guide MeeFrame 28

5. Setup

Tap on the Setup icon at the Main Menu to access configuration screens for

MeeFrame.

General

From this screen, you can verify the firmware version, set the LCD brightness,

select the language, or reset all of the settings to factory default. After

making the selection, tap the Apply button to apply the changes.

Slideshow

From this screen, you can set the interval between photos during the

slideshows, the transition effects to be used, and the sequence of photo

slideshow. After making the selection, tap the Apply button to apply the

changes.

Network

From this screen, you can configure the wireless network for MeeFrame as

described in page 13.

User Guide MeeFrame 29

Weather

From this screen, you can select the country and city whose weather

information will be displayed when you tap the Weather icon in the Main

Menu. You can also select whether you want the temperature information to

be in Celsius or Fahrenheit. After making the selection, tap the Apply button

to apply the changes.

Time

From this screen, you can set the current time and the timer for MeeFrame to

go to sleep or wake up.

Under Date & Time, you can check the Use manual time setting to set the

time yourself, or uncheck the box and select a city to download the current

time and date information from the Internet. You can also check the Daylight

saving time box. Check the box labeled Use Military if you are more familiar

with 24-hour clock. After making the selection, tap the Apply button to apply

the changes.

In the Timer screen, you can enable the timer and set the wake-up time and

sleep time for MeeFrame. After making the selection, tap the Apply button to

apply the changes.

Touch

Tapping Setup→Touch will immediately start the touch screen calibration

utility. You must use the stylus and tap the cross marks fairly accurately in

order to complete the calibration.

User Guide MeeFrame 30

Product Registration

Thank you for purchasing MeeFrame.

Please visit our Website and register your MeeFrame in order for us to serve

you better. We count on our customers’ feedback and suggestions in

improving our products and services. Your input would be much

appreciated.

How to register your MeeFrame:

1. Visit our corporate website at www.LOOQS.com.

2. Click on the “Product Registration” link.

3. Fill out the product registration form online and submit.

Product registration is a good way to ensure you receive timely news about

updates to MeeFrame and technical support. If desired, registered

customers will receive news about new products from LOOQS.

User Guide MeeFrame 31

Warranty

This LOOQS product is fully warranted during the period promised at the

purchase of your product. This effects from the original purchase date

against defective components and workmanship. In the event that warranty

service is required, you should return the product to the retailer from whom it

was purchased.

CONDITIONS

1. The warranty is only valid if, when warranty service is required, the

warranty card is fully and properly completed and is presented with

the original invoice or sales slip or confirmation, and the serial number

on the product has not been defaced.

2. LOOQS’s obligations are limited to the repair or, at its discretion,

replacement of the product or the defective part.

3. Warranty repairs must be carried out by authorized LOOQS Dealers or

authorized LOOQS service centers. No re-imbursement will be made

for repairs carried out by non LOOQS dealers and, any such repair

work and damage to the products caused by such repair work will not

be covered by this warranty.

4. In case the product will be used in a country other than the country it

was designed and developed for, this might result in the need for

change in the technical- and / or safety regulations effective for that

other country. Such changes are not considered material and

workmanship errors of the device and are therefore not covered by

this warranty. Any costs coming from these changes as well as any

other caused damages cannot be charged.

5. This warranty covers none of the following:

a. Periodic checkups, maintenance and repair or replacement of

parts due to normal wear and tear.

b. Cost relating to transport, removal or installation of the product.

c. Misuse, including the failure to use this product for its normal

purpose or incorrect installation.

User Guide MeeFrame 32

d. Damage caused by lightning, water, fire, acts of God, War,

Public disturbances, incorrect mains voltage, incorrect

ventilation or any other cause beyond the control of LOOQS .

6. This warranty is valid for any person who legally acquired possession of

the product during the warranty period.

The consumers statutory rights in any applicable national legislation whether

against the retailer arising from the purchase contract or otherwise are not

affected by this warranty. Unless there is national legislation to the contrary,

the rights under this warranty are consumers sole rights and LOOQS, its

partners and distributors shall not be liable for indirect or consequential loss or

any damage to any other equipment or material.

User Guide MeeFrame 33

copied, stored in a search system, applied or transmitted in whole or in part in

any form or method (electronically, mechanically, copy through photocopier,

disk copy, or other methods) without an expressed permission from RRC BV in

a form of a document. LOOQS and MeeFrame are trademarks or registered

trademarks of RRC BV. Microsoft Windows 98, Windows ME, Windows 2000,

Windows XP, Windows Vista are registered trademarks of Microsoft

Corporation. Other product names are trademarks or registered trademarks

of their owners. One gigabyte, or GB, equals one billion bytes when referring

to hard drive capacity. Accessible capacity may vary. RRC BV reserves the

right to change product specifications without notice.

Licensing

Supply of this product does not convey a license nor imply any right to

distribute content created with this product in revenue-generating broadcast

systems (terrestrial, satellite, cable and/or other distribution channels),

streaming applications (via Internet, intranets and/or other networks), other

content distribution systems (pay-audio or audio-on-demand applications

and the like) or on physical media (compact discs, digital versatile discs,

semiconductor chips, hard drives, memory cards and the like). An

independent license for such use is required.

User Guide MeeFrame 34

LOOQS Mee Frame User manual

Brand: LOOQS

Model: Mee Frame

Category: Digital photo frames

Type: User manual

Download PDF

report

LOOQS Mee Frame User manual

LOOQS Mee Frame User manual

Other documents