Eurotech SekuFACE Owner's manual

Eurotech
Brand
Eurotech
Model
SekuFACE
Type
Owner's manual
SekuFACE
Facial Recognition System
INSTALLATION MANUAL
Rev 1.0 – 31 January 2012 – Seku-FACE_InstMan_En_1.0
© 2012 Eurotech
Trademarks
All trademarks both marked and unmarked appearing in this document are the property of their respective
owners.
Revision history
Revision
Description
Date
1.0
First release
31 January 2012
Table of contents SekuFACE Installation Manual
3
Table of contents
Trademarks .................................................................................................................................................................. 2
Revision history ........................................................................................................................................................... 2
Table of contents .......................................................................................................................................................... 3
Important user information .......................................................................................................................................... 5
Safety notices and warnings ........................................................................................................................................ 5
Installation in Cupboards and Safes ...................................................................................................................... 5
Do Not Operate in an Explosive Atmosphere ........................................................................................................ 5
Alerts that can be found throughout this manual ......................................................................................................... 5
Use an Appropriate Power Supply ......................................................................................................................... 6
Antistatic Precautions ............................................................................................................................................. 6
Life support policy ........................................................................................................................................................ 6
Warranty ...................................................................................................................................................................... 6
CE notice ..................................................................................................................................................................... 6
WEEE .......................................................................................................................................................................... 7
RoHS ........................................................................................................................................................................... 7
Technical assistance ................................................................................................................................................... 8
Transportation ........................................................................................................................................................ 8
Product overview .......................................................................................................................................................... 9
General Architecture .................................................................................................................................................. 10
Compact Architecture ................................................................................................................................................ 13
Specifications .............................................................................................................................................................. 15
Vision System: ........................................................................................................................................................... 15
Interfaces ................................................................................................................................................................... 15
Computing Power and Storage ................................................................................................................................. 15
Communications ........................................................................................................................................................ 16
Physical Characteristics ............................................................................................................................................ 16
Quick start .................................................................................................................................................................... 17
Assembly of OEM components in a totem structure (Optional) ............................................................................ 18
Positioning ................................................................................................................................................................. 18
Cabling ....................................................................................................................................................................... 20
Assembly of the Camera Module .............................................................................................................................. 20
Network setup.............................................................................................................................................................. 21
Totem setup ................................................................................................................................................................. 22
Enter and Exit the Totem's Setup Mode .................................................................................................................... 22
Camera Setup ............................................................................................................................................................ 23
Common web interface ............................................................................................................................................... 27
Users ......................................................................................................................................................................... 28
Firmware .................................................................................................................................................................... 29
Device ........................................................................................................................................................................ 29
Watchdog ................................................................................................................................................................... 30
Totem web interface ................................................................................................................................................... 31
Device Settings .......................................................................................................................................................... 31
Shutter Min/Max, Target Avg and Alpha T ........................................................................................................... 31
Threshold Registered ........................................................................................................................................... 32
Table of contents SekuFACE Installation Manual
4
Seku-FACE_InstMan_En_1.0
Server Name and Port ......................................................................................................................................... 32
Gate Options .............................................................................................................................................................. 32
One Time Enroll ......................................................................................................................................................... 32
Flowchart of the Totem's Operation .......................................................................................................................... 34
Server Web Interface .................................................................................................................................................. 37
Transits ...................................................................................................................................................................... 38
Registered users........................................................................................................................................................ 41
Settings ...................................................................................................................................................................... 42
Backup the System ..................................................................................................................................................... 43
Notes ............................................................................................................................................................................ 45
Important user information SekuFACE Installation Manual
5
Important user information
In order to lower the risk of personal injury, electric shock, fire or damage to equipment, users must observe the
following precautions, as well as good technical judgment, whenever this product is being installed or used.
All reasonable efforts have been made to ensure the accuracy of this document; however, Eurotech S.p.A.
assumes no liability resulting from any error/omission in this document, or from the use of the information
contained herein.
Eurotech reserves the right to revise this document and to change its contents at any time without obligation to
notify any person of such revision or changes.
Safety notices and warnings
The following general safety precautions must be observed during all phases of operation, service, and repair of
the equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of the equipment. Eurotech S.p.A. assumes
no liability for the customer’s failure to comply with these requirements.
The safety precautions listed below represent warnings of certain dangers of which Eurotech is aware of. You, as
the user of the product, should follow these warnings and all other safety precautions necessary for the safe
operation of the equipment in your operating environment.
Installation in Cupboards and Safes
In the event that the product is placed within a cupboard or safe, together with other heat generating equipment,
ensure appropriate ventilation.
Do Not Operate in an Explosive Atmosphere
Do not operate the equipment in the presence of flammable gases or fumes. Operation of any electrical
equipment in such an environment constitutes a definite safety hazard.
Alerts that can be found throughout this manual
The following alerts indicate potentially dangerous situations:
Symbol
Meaning
DANGER!
Information highlighting potential electrical shock hazards:
Personal injury or death could occur.
Damage to the system, connected peripheral devices, or software could occur.
Appropriate safety precautions should always be used; these should meet the requirements set out
for the environment that the equipment will be deployed in.
Warning:
Information regarding potential hazards:
Personal injury or death could occur. Also damage to the system, connected peripheral
devices, or software could occur if the warnings are not carefully followed.
Appropriate safety precautions should always be used, these should meet the requirements set out
for the environment that the equipment will be deployed in.
Information and/or Notes:
These will highlight important features or instructions that should be observed.
Important user information SekuFACE Installation Manual
6
Seku-FACE_InstMan_En_1.0
Use an Appropriate Power Supply
Only start the product with a power supply that conforms to the voltage requirements as displayed on the
voltage label attached to the system. In case of uncertainty about the required power supply, please contact
your local Eurotech Technical Support Team (see page Errore. Il segnalibro non è definito.) or your local
electricity authority.
Only use power supplies that are compliant with SELV regulation.
Always use certified power cables. The power cable must meet the products’ voltage and current
requirements.
Position cables with care. Avoid positioning cables in places where they may be trampled on or compressed
by objects placed on it. Take particular care of the plug, power-point and outlet of power cable.
Avoid over-loading power-points
Antistatic Precautions
To avoid ESD (Electro Static Discharge) damage, always use appropriate antistatic precautions when handing
any electronic equipment.
Life support policy
Eurotech products are not authorized for use as critical components in life support devices or systems without the
express written approval of Eurotech S.p.A.
Warranty
For Warranty terms and conditions users should contact their local Eurotech Sales Office.
See the third and back cover for full contact details.
CE notice
This product has the CE labelling in accordance with the 1999/5/EC regulations.
Eurotech shall not be liable for use of its products with equipment (i.e. power supplies,
personal computers, etc.) that are not CE marked.
This product has the CE labelling in accordance with the 1999/5/EC regulations.
Important user information SekuFACE Installation Manual
7
WEEE
The information below is issued in compliance with the regulations set out in the 2002/96/EC directive,
subsequently superseded by 2003/108/EC. It refers electrical and electronic equipment and the waste
management of such products.
When disposing of a device, including all of its components, subassemblies and materials that are an integral part
of the product, you should consider the WEEE directive.
The symbol to the right has been attached to the equipment or, if this has not been
possible, on the packaging, instruction literature and/or the guarantee sheet. By using this
symbol, it states that the device has been marketed after August 13th 2005, and implies
that you must separate all of its components when possible, and dispose of them in
accordance with local waste disposal legislations:
Because of the substances present in the equipment, improper use or disposal of the refuse can cause
damage to human health and to the environment
With reference to WEEE, it is compulsory not dispose of the equipment with normal urban refuse,
arrangements should be instigated for separate collection and disposal
Contact your local waste collection body for more detailed recycling information
In case of illicit disposal, sanctions will be levied on transgressors
RoHS
This device, including all it components, subassemblies and the consumable materials that are an integral part of
the product, has been manufactured in compliance with the European directive 2002/95/EC known as the RoHS
directive (Restrictions on the use of certain Hazardous Substances). This directive targets the reduction of certain
hazardous substances previously used in electrical and electronic equipment (EEE).
Important user information SekuFACE Installation Manual
8
Seku-FACE_InstMan_En_1.0
Technical assistance
For any technical questions, or if you cannot isolate a problem with your device, or for any enquiry about repair
and returns policies, feel free to contact your local Eurotech Technical Support Team.
See the third and back cover for full contact details.
Transportation
When transporting any module or system, for any reason, it should be packed using anti-static material and
placed in a sturdy box with enough packing material to adequately cushion it.
Warning:
The products warranty will be void if any product returned to Eurotech and is damaged due to
inappropriate packaging
Product overview SekuFACE Installation Manual
9
Product overview
SekuFACE is the ETH Security facial recognition system. A facial recognition system is a computer application
for automatically identifying or verifying a person from a digital image.
The identification process is done by comparing the facial features extracted from an image with the biometrics
previously stored in a facial database.
In Fig 1. the SekuFACE facial recognition system is shown.
Figure 1. SekuFACE
SekuFACE is a collaborative access control system:
It should be noted that SekuFACE is a collaborative access control system. This means that people should
do their best in order to be recognized by the system.
Product overview SekuFACE Installation Manual
10
Seku-FACE_InstMan_En_1.0
General Architecture
As shown in Figure 2 the general architecture of the system is composed by a series of gate devices connected
through a network to a central server. A gate device or totem is the aggregation of a panel pc, a digital camera
and an infrared illuminator. Its function is to control the access to a security building by comparing the facial
features of people in front of the totem with a database of registered users. Every totem must be placed on a
entry (totem in) or exit (totem out) passage and by querying a central server can grant or deny the access to the
building. The central server maintains a database of registered users and it is responsible to compare the faces
coming from the gates with the ones saved in its database.
Figure 2. General architecture of the system
On each gate device that makes up the network runs a software that expose two interfaces. The first, called
totem's user interface, is the user interface that is visible to all the people that need to be authenticated by the
system. Its interface is shown on the monitor of every panel pc and its purpose is to guide the user through the
steps of the recognition process. A screen shot of that UI is visible in Figure 3.
Totem
In
panel
pc
web interface
Server
Face
DB
web interface
Totem
Out
panel
pc
web interface
Totem
Out
panel
pc
web interface
Web
Browser
Infrared
Illuminator
Camera
Product overview SekuFACE Installation Manual
11
Figure 3. Totem's User Interface
The second interface, called totem's web interface, is designed for system administrator and its main function is
to configure and setup a totem. This interface is reachable with any modern browsers and is protected by a login
form, in this way only authenticated user can configure a totem. An example of that interface is visible in Figure 4.
Figure 4. Totem's Web Interface
Product overview SekuFACE Installation Manual
12
Seku-FACE_InstMan_En_1.0
Similarly to the totems also on the server runs a software with two interfaces. One, invisible to the users, is
exposed to the totems and its purpose is to manage the communication between totems and the central server.
The other (Figure 5) is a web interface called server's web interface. Its purpose is to let system administrators to
monitor the system. This interface show all the transits of the registered users, allow the user management and
the filtering of transits and registered users based on many fields and kind of search (by photo, by anagraphical
and temporal data, etc.).
Figure 5. Server's Web Interface
Product overview SekuFACE Installation Manual
13
Compact Architecture
In addition to the general architectural configuration exposed before there is a compact configuration suitable for
small system installations. This compact configuration eliminate the physical separated server and moves its
functionality and interface on one of the totems (see Figure 6).
Figure 6. Compact Architecture
Moreover it is also possible to reduce the entire system to only one totem that incorporate all the features
described above (Figure 7). The web interface of the totem that incorporate the server functionality appears as in
Figure 8, with the server and client menu merged.
Totem
In &
Serve
r
panel
pc
web interface
Face
DB
Totem
Out
panel
pc
web interface
Totem
Out
panel
pc
web interface
Web
Browser
Infrared
Illuminator
Camera
Product overview SekuFACE Installation Manual
14
Seku-FACE_InstMan_En_1.0
Figure 7. One Totem Configuration
Figure 8. Totem and Server Web Interfaces Merged
Finally the totem is also supplied in OEM configuration that is with all the components of the physical totem
disaggregated. In this case the panel pc, the infrared illuminator and the camera must be assembled by the
customer as explained in the chapter “Assembly of OEM components in a totem structure (Optional)”.
Totem In
Out &
Server
panel pc
web interface
Face
DB
Web
Browser
Infrared
Illuminator
Camera
Specifications SekuFACE Installation Manual
15
Specifications
Vision System:
Image Capture
Resolution 1296 x 966 pixels (1.3 Mpixel BW)
Progressive scan CCD BW
Lens type 8,5 mm
Automatic Gain Control
Auto White Balance
Back light compensation
Integrated IR illuminator
Class 1M CEI EN 69825-1 ed. 4
Power 1,5 W
Wavelength 850 nm
Angle 30°
Recognition Process
Capture rate 6 face images per second
Image analysis for ICAO standard compliance and biometric profile creation in 3 sec.
Matching analysis with stored profiles in 3 sec. every 1000 profiles in database
Interfaces
Ports and I/O
1x 10/100BASE-T Ethernet Port
15’’ LCD TFT Monitor
2x optoisolated input/output
Power Supply
24V DC
Power Consumption
74W Consumption
Computing Power and Storage
Processor
Intel® Core™ Duo Processor up to 2.0 GHz
2 GHz side bus
Internal Storage
Up to 600000 JPEG face images (300 GB Storage; 500 KB per face image with text file included)
2 GB Ram 667 MHz DDR-2
1x IDE/PATA drive interface and mounting
2.5’’ SATA HD
Specifications SekuFACE Installation Manual
16
Seku-FACE_InstMan_En_1.0
Operating System
Microsoft® Windows XP Professional for Embedded Systems
Communications
TCP Options
Configurable TCP parameters
Data Format
Data transmission CSV file for access records
JPEG face images associated with access records
Eurotech Cloud Computing platform compatible
Physical Characteristics
Module dimensions 180 x 50 x 15 cm (70.9’’ x 19.7’’ x 5.9’’)
Weight 15 kg
Temperature range 0°C to +45°C (estende temperature option)
IP52 Mechanical Protection
Quick start SekuFACE Installation Manual
17
Quick start
Following are reported the steps for a quick setup of the face recognition system.
1. Configure the central server network settings as described in chapter Errore. L'origine riferimento non è
stata trovata. (you can skip this step if you have a compact architecture without a separated central server).
2. For each totem that makes up your system architecture perform the following steps:
o If you have the single parts that comprise the totem not already assembled follows the chapter
Assembly of OEM components in a totem structure (Optional).
o Configure the totem network settings as described in chapter Errore. L'origine riferimento non è
stata trovata..
o Setup the totem following the instructions of the chapter Errore. L'origine riferimento non è stata
trovata..
o Report, in the totem device settings, the central server IP and port (see paragraph Server Name and
Port).
o Assign a unique ID to the totem and sets the type of gate (see paragraph Gate Options).
o Switch the totem to operation mode and reboot it (see Enter and Exit the Totem's Setup Mode).
3. Choose a totem and at the moment set it to register new users (see One Time Enroll).
4. Try each totem by performing some transits to see that everything works (see chapter Flowchart of the
Totem's Operation).
5. Connect to the server's web interface and check that all works as expected (see chapter Server Web
Interface).
NOTE:
The access to the management interface requires a Web Browser. We recommend Mozilla Firefox 3.6
(or higher) or Internet Explorer 8. To access the web interface of a device it is sufficient to point your
browser to the IP address of the device. For more details consult the chapter Errore. L'origine
iferimento non è stata trovata..
The default credentials to access an ETH Security device's web interface are:
User Name
Password
Role
admin
default
Administrator
config
default
Configurator
view
default
Viewer
Table 1. Default Users
WARNING!
The default username and password are suitable only for the first login. Keeping them unchanged is
really unsecure, we strongly suggest to setup a new password as soon as possible.
Assembly of OEM components in a totem structure (Optional) SekuFACE Installation Manual
18
Seku-FACE_InstMan_En_1.0
Assembly of OEM components in a totem structure
(Optional)
This chapter is optional, it is useful only if you have the single parts that compose the totem not already
assembled and inserted in a totem chassis. If this is not your case you can skip this chapter.
The parts that made up a totem comprise an infrared illuminator, a camera, a panel pc, a 12V power supplier and
the necessary cabling.
Positioning
The Figure 9 show the best placement for the individual parts.
Figure 9. Best placement of single parts
Assembly of OEM components in a totem structure (Optional) SekuFACE Installation Manual
19
Placing the camera at an height of 160 cm you can frame the face of people with a height ranging from 1,60
meters to 2,00 meters if the person is at least one meter from the camera.
Positioning of the camera:
Please pay attention in the positioning of the camera. It should be mounted rotated by 90 degree
counter-clockwise looking at the camera, or equivalently 90 degree clockwise looking at the back of
the camera. To be sure refer to Figure 10 that shows the camera viewed from behind.
Figure 10. Camera viewed from behind
For more information on assembling the individual parts look in their respective manuals that are provided with
this guide.
Assembly of OEM components in a totem structure (Optional) SekuFACE Installation Manual
20
Seku-FACE_InstMan_En_1.0
Cabling
The diagram below shows the necessary wiring.
Figure 11. Wiring Diagram
If in doubt, consult the manuals, of the single parts, attached to this.
Assembly of the Camera Module
To properly assemble the camera you have to screw the individual parts that make it up as shown in the diagram
Figure 12. They comprise the camera, the optics and the IR band pass filter.
Figure 12. Assembly of the camera modules.
Panel PC
LAN1
LAN2
Power Supply
Connector
24Vdc
Infrared
Illuminator
12 Vdc
Power Supply
Camera
Ethernet
Port
6-pin
receptacle
24 Vdc
Power Supply
TCP/IP
Network
RJ45 Cable
Cat 5e
RJ45 Cable
Cat 5e
8-
channel
relay
actuator
Turnstile
(not included)
Camera
Optics
IR filter
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Eurotech SekuFACE Owner's manual

Eurotech
Brand
Eurotech
Model
SekuFACE
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents