LG 27UD88-W Owner's manual

27UD88-W
LG
Brand
LG
Model
27UD88-W
Category
TVs & monitors
Type
Owner's manual

This manual is also suitable for

www.lg.com
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
27UD88
2
ENGLISH
CONTENTS
3 LICENSE
4 ASSEMBLINGAND
PREPARING
4 Product Components
5 Supported Drivers and Software
6 Component and Button Description
6 - How to Use the Joystick Button
7 Input Connector
8 Moving and Lifting the Monitor
9 Installing the Monitor
9 - Assembling the stand base
10 - Using the cable holder
11 - Installing onto a table
12 - Adjusting the angle
12 - Adjusting the Stand Height
13 - Pivot Feature
14 - Using the Kensington lock
14 - Detaching the Stand Body
14 - Installing the wall mount plate
15 - Installing to a wall
16 USINGTHEMONITOR
16 Connecting to a PC
16 - HDMI connection
16 - DisplayPort connection
16 - USB-C connection
17 Connecting to AV Devices
17 - HDMI connection
17 Connecting Peripherals
17 - USB Cable connection - PC
18 - Connecting Headphones
18 Service only port
19 USERSETTINGS
19 Activating the Main Menu
20 Customizing settings
20 - Menu Settings
20 - -Quick Settings
21 - -PBP
22 - -Picture
25 - -General
27 - -Reset
28 TROUBLESHOOTING
30 SPECIFICATIONS
30 27UD88
31 Factory Support Mode (Preset Mode, PC)
31 HDMI
31 DisplayPort/ USB-C
32 HDMI Timing (Video)
32 Power LED
3
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
VESA, VESA logo, DisplayPort Compliance Logo and DisplayPort Compliance Logo for
dual-mode source are all registered trademarks of the Video Electronics Standards
Association.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENGLISH
ASSEMBLINGANDPREPARING
ProductComponents
Please check whether all the components are included in the box before using the product. If there are missing components,
contact the retail store where you purchased the product. Note that the product and components may look different from those
shown here.
Always use genuine components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of counterfeit components.
It is recommend that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
Note that the components may look different from those shown here.
Without prior notice, all information and specifications in this manual are subject to change to improve the performance
of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you
purchased the product.
CAUTION
NOTE
CD(Owner's Manual) /
Card
DisplayPort Cable
USB C-C cable USB C-A cable
Stand Base Stand Body
HDMI Cable
Power Cord
AC-DC Adapter
Cable Holder
5
ENGLISH
SupportedDriversandSoftware
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product package.
Required and Recommended: You can download and install the latest version from the enclosed CD or from the LGE
website
(www.lg.com)
.
Optional: You can download and install the latest version from the LGE website
(www.lg.com)
.
DriversandSoftware InstallationPriority 27UD88
MonitorDriver Recommended O
OnScreenControl Recommended O
DualController Optional O
TRUECOLORPRO Optional O
6
ENGLISH
ComponentandButtonDescription
Power LED
On: power is on
Off: power is off
Joystick Button
HowtoUsetheJoystickButton
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
BasicFunctions
Poweron
Press the joystick button once with your finger to turn on the
monitor.
Poweroff Press and hold the joystick button once with your finger to turn off the monitor.
◄/►
Volume
Control
You can control the volume by moving the joystick button left/right.
The joystick button is located at the bottom of the monitor.
NOTE
7
ENGLISH
InputConnector
8
ENGLISH
MovingandLiftingtheMonitor
When moving or lifting the monitor, follow these instructions
to prevent the monitor from being scratched or damaged and
to ensure safe transportation regardless of its shape or size.
As far as possible, avoid touching the monitor screen.
This may result in damage to the screen or some of
the pixels used to create images.
It is advisable to place the monitor in the original box
or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the
power cord and all cables.
Hold the top and bottom of the monitor frame firmly.
Do not hold the panel itself.
When holding the monitor, the screen should face
away from you to prevent it being scratched.
When moving the monitor, avoid any strong shock or
vibrations to the product.
When moving the monitor, keep it upright, never turn
the monitor on its side or tilt it sideways.
If you use the monitor panel without the stand base,
its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor
or human injury. In addition, this may cause the joystick
button to malfunction.
CAUTION
9
ENGLISH
InstallingtheMonitor
Assemblingthestandbase
To protect the screen from scratches, cover the
surface with a soft cloth.
CAUTION
1
3
4
2
StandBody
StandBase
Press the stand until the button reaches the top.
NOTE
or
10
ENGLISH
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
Applying excessive force when tightening screws
may cause damage to the monitor. Damage caused in
this way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding
the base. This may cause the monitor to fall off the
stand and could result in personal injury.
When lifting or moving the monitor, do not touch
the monitor screen. The force applied to the monitor
screen may cause damage to it.
CAUTION
Usingthecableholder
Cable Holder
Arrange the cables using the cable holder as shown in the
illustration.
You can disassemble the stand in the reverse order of
the assembly.
NOTE
11
ENGLISH
2
1
3
Installingontoatable
1
Lift the monitor and place it on the table in an upright
position.
Place at least 100mm away from the wall to ensure
sufficient ventilation.
CautionsWhenConnectingPowerCord
2
Connect the power adapter to the monitor and then plug
the power cord into the wall outlet.
100mm
100mm
100mm
100mm
Unplug the power cord prior to moving or installing
the monitor. There is risk of electric shock.
Make sure to use the power cord that is provided in
the product package and connect it to a grounded
power outlet.
If you need another power cord, please contact your
local dealer or the nearest retail store.
CAUTION
3
Press the joystick button on the bottom of the monitor
to turn on the monitor.
100-240 V ~
12
ENGLISH
Adjustingtheangle
1
Place the monitor in an upright position, mounted on the
stand base.
AdjustingtheStandHeight
1
Handle the monitor with both hands for safety.
2
The height can be adjusted up to 110.0mm.
2
Adjust the angle of the screen. The angle of the screen
can be adjusted forwards or backwards for a comfortable
viewing experience.
Front SideRear Side
To avoid injury to the fingers when adjusting the
screen, do not hold the lower part of the monitor's
frame as illustrated below.
WARNING
Be careful not to touch or press the screen area when
adjusting the angle of the monitor.
110.0 mm
Do not put your fingers or hand
between the screen and the base
(chassis) when adjusting the
screen's height.
WARNING
13
ENGLISH
3
Rotate the monitor clockwise as shown in the figure.
4
Complete the installation by rotating the monitor 90° as
shown below.
PivotFeature
The pivot feature allows the monitor to rotate 90° clockwise.
1
Raise the monitor to the maximum height.
2
Adjust the angle of the monitor in the direction of the ar-
row as shown in the figure.
Stand
Head
WARNING
To avoid scratching the stand base, make sure that
when rotating the monitor using the pivot feature, the
stand does not make contact with the monitor.
Auto Pivot feature of the display is not supported.
The screen can be rotated easily using the screen
pivot shortcut key provided with your Windows op-
erating system. Note that some Windows versions
and some graphics card drivers may use different
settings for the screen pivot key or may not sup-
port the pivot key at all.
Windows screen pivot shortcut keys
-
0°: Ctrl + Alt + Up arrow key (
↑
)
-
90°: Ctrl + Alt + Left arrow key (
←
)
-
180°: Ctrl + Alt + Down arrow key (
↓
)
-
270°: Ctrl + Alt + Right arrow key (
→
)
NOTE
14
ENGLISH
Installingthewallmountplate
This monitor supports the specification of the standard wall
mount plate or compatible device.
1
Place the screen face down. To protect the screen from
scratches, cover the surface with a soft cloth.
2
Place the wall mount plate onto the monitor and align it
with the screw holes.
3
Tighten the four screws to fix the plate to the monitor
using a screwdriver.
1
Place the monitor’s screen face down. To protect the
screen from scratches, cover the surface with a soft
cloth.
2
Remove the stand from the monitor by pressing the but-
ton on the bottom center of the back of the monitor.
The wall mount plate is sold separately.
For more information on installation, refer to the wall
mount plate's installation guide.
Be careful not to use excessive force when mounting
the wall mount plate, as this can damage the monitor's
screen.
NOTE
Use of the Kensington lock is optional. The
accessories can be purchased at your local electronics
store.
NOTE
UsingtheKensingtonlock
The Kensington security system connector is located at the
back of the Monitor set.
For more information on installation and usage, refer to the
Kensington lock user manual or visit the website at http://
www.kensington.com.
Connect the Kensington security system cable between the
Monitor set and a table.
Take care when rotating the monitor if the cable is
connected.
To avoid injury when rotating the display, do not place
your fingers between the display and the stand base.
DetachingtheStandBody
WARNING
15
ENGLISH
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to
the monitor and to the wall.
1 If you use screw longer than standard, the monitor might
be damaged internally.
2 If you use improper screw, the product might be damaged
and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Installingtoawall
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed instal-
lation instructions can be obtained from your local retail
store. Please refer to the manual to install and set up a
tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
Unplug the power cord before moving or installing
the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a slanted
wall may result in the monitor falling off, which
could lead to injury. Please use the genuine LG wall
mounting bracket. For more information, contact
your local retail store or a qualified installer.
Applying excessive force when fastening screws may
cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Use the wall mounting bracket and screws that
conform to the VESA standard. Damage caused by
the use or misuse of inappropriate components will
not be covered by the product warranty.
Screw length from outer surface of back cover should
be under 8mm.
Use the screws specified by the VESA standard.
The wall mount kit includes the installation guide and
all necessary parts.
The wall mounting bracket is optional. The accessories
can be purchased at your local retail store.
The length of the screw may differ for each wall
mounting bracket. Ensure the correct length screw is
used.
For more information, please refer to the user manual
for the wall mounting bracket.
CAUTION
NOTE
Wall mount Pad
Wall mount Pad
Back Cover
Back Cover
Standard screw:
Max.8mm
Wall Mount (A x B)
A
B
WallMount(AxB) 100 x 100
Standardscrew M4 x L10
Numberofscrews 4
WallMountPlate
(Optional)
RW120
16
ENGLISH
USINGTHEMONITOR
ConnectingtoaPC
This monitor supports the *Plug and Play feature.
*Plug and Play: A feature that allows you to add a
device to your computer without having to reconfigure
anything or install any manual drivers.
DP OUT
DisplayPortconnection
Transmits the digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor us-
ing the DisplayPort cable as illustrated below.
Press the menu button and then select the input option from
the input menu.
USB-Cconnection
Transmits digital video and audio signals and USB data from
your PC to the monitor.
Connect the monitor to your PC using the USB-C cable as
shown in the illustration below.
Press the menu button and then select the input option from
the input menu.
There may be no video or audio output depending on
the DP version of the PC.
If you use generic cables not certified by LG, the screen
may not display or there may be image noises.
NOTE
HDMIconnection
Transmits the digital video and audio signals from your PC
and A/V devices to the monitor. Connect your PC and AV de-
vice to the monitor with the HDMI cable as illustrated below.
Press the menu button and then select the input option from
the input menu.
(USB C-A cable)
(Data Only)
(USB C-C cable)
NOTE
If you use HDMI PC, it can cause compatibility problem.
Use a certified cable with the HDMI logo attached. If
you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI
®
/
TM
Cable
- High-Speed HDMI
®
/
TM
Cable with Ethernet
NOTE
PD(Power Delivery), DP Alternate Mode(DP over
USB-C) and USB Data are supported via USB-C Port.
Features may not work properly depending on the
connected device’s specifications and the environment.
USB-C port is not for the Monitor Power source but
for a PC power source.
Connect Adapter to supply power to the Monitor
17
ENGLISH
(sold separately)
ConnectingtoAVDevices
HDMIconnection
Transmits the digital video and audio signals from your PC
and A/V devices to the monitor. Connect your PC and AV de-
vice to the monitor with the HDMI cable as illustrated below.
Press the menu button and then select the input option from
the input menu.
ConnectingPeripherals
USBCableconnection-PC
The USB port on the product functions as a USB hub.
Please connect the USB C-C or USB C-A cable to the PC.
NOTE
If you use HDMI PC, it can cause compatibility problem.
Use a certified cable with the HDMI logo attached. If
you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI
®
/
TM
Cable
- High-Speed HDMI
®
/
TM
Cable with Ethernet
NOTE
Make sure to install the most recent Windows OS
service pack before using the product.
Peripheral devices are sold separately.
A keyboard, mouse, or USB device can be connected to
the USB port.
When QuickCharge is set to On , data transmission
through the USB1/2 port is not available (e.g.
connecting your keyboard, mouse, or other USB
storage devices to the monitor). (Go to General >
QuickCharge to set Quick Charge to On or Off .)
The charging speed may vary depending on the device.
Cautions When Using a USB Device
A USB device with an automatic recognition
program installed, or that uses its own driver, may
not be recognized.
Some USB devices may not be supported or may
not work properly.
It is recommended to use a USB hub or hard disk
drive with power supplied. (If the power supply
is not adequate, the USB device may not be
recognized properly.)
If Quick Charge is off and the upstream Port is
not connected with Host PC, monitor may not
support ‘Charge’ .
CAUTION
18
ENGLISH
Serviceonlyport
(sold separately)
ConnectingHeadphones
Connect peripherals to the monitor via the headphones port.
Connect as illustrated.
The port is used only for “Service”.
Peripheral devices are sold separately.
If you use angled earphones, it may cause a problem
with connecting another external device to the
monitor. Therefore, it is recommended to use straight
earphones.
Depending on the audio settings of the PC and
external device, headphones and speaker functions
may be limited.
NOTE
Angled Straight
SERVICE ONLY
19
ENGLISH
Button MenuStatus Description
Mainmenudisabled Enables the main menu.
Mainmenuenabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off the monitor
this way at any time, including when the OSD is on.)
◄
Mainmenudisabled Adjusts the monitor volume level.
Mainmenuenabled Enters the menu features.
►
Mainmenudisabled Adjusts the monitor volume level.
Mainmenuenabled Enters the input feature.
▲
Mainmenudisabled Enables the main menu.
Mainmenuenabled Enters the game mode feature.
▼
Mainmenudisabled Enables the main menu.
Mainmenuenabled Turns off the monitor.
MainMenuFeatures
MainMenu Description
Menu Configures the screen settings.
GameMode You can change Picture Mode to a gaming mode.
Input Sets input mode.
Monitoroff Turns off the monitor.
Exit Exits the main menu.
USERSETTINGS
ActivatingtheMainMenu
1
Press the joystick button on the bottom of the monitor.
2
Move the joystick up/down (
▲
/
▼
) and left/right(
◄
/
►
) to set the options.
3
Press the joystick button once more to exit the main menu.
Joystick Button
20
ENGLISH
Each option is described below.
Customizingsettings
MenuSettings
-QuickSettings
1
To view the OSDmenu, press the joystickbutton at the bot-
tom of the monitor and then enter the Menu.
2
Go to QuickSettings>
Brightness
by moving the joystick.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move the
joystick to
◄
or pressing ( / OK) it.
5
If you want to exit the OSD menu, move the joystick to
◄
until
you exit.
Menu>QuickSettings Description
Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Volume Adjusts the volume.
NOTE
You can adjust Mute/ Unmute by moving the joystick button to
▼
in the Volume menu.
Input Selects the current input mode.
Ratio Adjusts the screen ratio.
Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays a video according to the input video signal aspect ratio.
1:1 The aspect ratio is not adjusted from the original.
NOTE
The display may look the same for Wide, Original, and 1:1 options at the recommended resolution.
The ratio is disabled in the interlaced signal.
Quick Charge
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

LG 27UD88-W Owner's manual

27UD88-W
LG
Brand
LG
Model
27UD88-W
Category
TVs & monitors
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers