LG LGUD6150 Owner's manual

CONTENTS 1

PHONE COMPONENTS 2

ONSCREEN ICONS 4

INSTALLING THE UIM CARD AND

BATTERY 5

Installing the UIM card 5

Installing the Battery 6

Removing the Battery 6

Charging the Battery 7

Battery Charge Level 7

BASIC FUNCTIONS 8

Turning the Phone On and Off 8

Changing the display language 8

Airplane Mode 8

Making a Call 9

Receiving Calls 9

PLAYING MUSIC 10

FM RADIO 11

TRACKER 12

MENU TREE 13

ENTERING AND EDITING

INFORMATION 14

Entering Information Using T9 Text Input 14

Typing In T9Arab 15

MESSAGES 16

Write New 16

INTRODUCTION 18

MENU FEATURES 19

FUNCTIONS USED DURING A CALL 31

SAFETY INFORMATION 32

Charger and Adapter Safety 32

Battery Information and Care 32

General Notice 32

1

CONTENTS

UD6150_Eng_090525 2009.7.23 3:2 PM Page 1

2

The following shows key components of your mobile phone.

PHONE COMPONENTS

2

1. Earpiece

2. Headset Jack

3. Soft Key1

4. CALL Key

5. Vibrate Mode Key

6. Microphone

7. Torch Light

8. LCD Screen

9. 4 Way Navigation Key

10. OK Key

11. Soft Key2/Clear

12. END/PWR Key

13. Alphanumeric Keypad

14. Key Guard

15. Charger Port

UD6150_Eng_090525 2009.7.23 3:2 PM Page 2

3

LCD Screen Displays messages & indicator

icons.

Soft Keys The names of the functions, of these

keys appear on the bottom of the screen.

●

Soft Key 1

Used to display the function setting menu.

Accepts the highlighted choice when

navigating through a menu.

●

Soft Key 2/Clear

Used to search phonebook and clear a single

space or character. Go to previous menu.

You can record voice during a call.

Send SMS on call reject during an incoming

call.

Turn on the torch light in standby mode.

CALL Key Allows user to place or answer calls.

See and redial from call history.

END/PWR Key Used to turn power On/Off and

to end a call. Using this key, you can return to the

idle screen. When you press once, when a call is

received, the phone stops ringing or vibrating

depending on the mode it is in. Press twice to

reject the call.

Alphanumeric Keypad These keys enable

you to enter numbers and characters and choose

menu items.

Navigation Key Use to scroll through menus

and move the cursor. You can also use these keys

for quick access to the following funtions.

: Messages(Short), Write New(Long)

: MP3(Short), FM Radio(Long)

: Ring Tone

: Profiles

OK Key Confirms the selection. In standby

mode, press for quick access to My Menu. Press

and hold to activate/deactivate the speaker mode.

Vibrate Mode Key In standby mode, set the

vibrate mode by pressing and holding the key

about 2 seconds.

3

UD6150_Eng_090525 2009.7.23 3:2 PM Page 3

The phone screen displays several onscreen icons which appear when the

phone is powered on.

ONSCREEN ICONS

4

Displays the strength of the signal

received by the phone and current

signal strength is indicated by the

number of bars displayed on the

screen.

No service.

The phone is not receiving a system

signal.

In use. A call is in progress.

* No icon indicates the phone is in

standby mode.

Charge level. Indicates battery charge

level.

Roaming mode

In General mode

In Silent mode

In Alarm mode

In Vibrate Only mode

In Outdoor mode

In Headset mode

Indicates that a Text Message or Voice

Mail Messages has been received.

BGM mode

UD6150_Eng_090525 2009.7.23 3:2 PM Page 4

5

Installing the UIM card

Your UIM card contains your phone number, service details and contacts and must be

inserted into your handset. If your UIM card is removed then your handset becomes

unusable until a valid one is inserted. Always disconnect the charger and other

accessories from your handset before inserting and removing your UIM card. Slide the

UIM card into the UIM card holder. Make sure that the UIM card is properly inserted and

the gold contact area on the card is facing downwards. To remove the UIM card, press

down lightly and pull it in the reverse direction.

Note

The metal contact of the UIM card can easily be damaged by scratches. Pay special attention to

the UIM card while handling.

INSTALLING THE UIM CARD AND BATTERY

UD6150_Eng_090525 2009.7.23 3:2 PM Page 5

Installing the Battery

1. Insert the bottom of the battery first into the bottom edge of the battery

compartment. Ensure the battery contacts align with the terminals on the phone.

2. Press down the top of the battery until it clips into place.

3. Place the battery cover and slide it upward until it clicks into place.

Removing the Battery

1. Make sure the power is off so that you do not lose any stored numbers or

messages.

2. Press down on the top part of the battery cover with your thumb and slide

the cover downward to remove it.

3. Lift the battery from the battery compartment.

6

UD6150_Eng_090525 2009.7.23 3:2 PM Page 6

7

Charging the Battery

To use the AC adapter charger provided with your phone:

1. Plug the AC adapter into the electrical outlet.

2. Insert the micro USB charger of the adapter into the AC adapter jack on the

bottom of the phone. (Make sure the battery is installed.)

●

As the phone charges, the battery icon continually displays a progression

from empty ( ) to full ( ).

It takes about five hours to fully recharge a completely rundown battery through

AC adaptor or through USB cable for laptops and PCs.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen.

When the battery charge level becomes low, the low battery sensor will alert

you in three ways: sounding an audible tone, blinking the battery icon outline,

and POP UP displaying Recharge the battery If the battery charge level

becomes exceedingly low, the phone will automatically switch off and any

function in progress will not be saved.

UD6150_Eng_090525 2009.7.23 3:2 PM Page 7

Turning the Phone On and Off

1. Install a charged battery pack or connect the phone to an external power

source such as the AC adaptor.

2. Hold down the Key for 2 seconds until the LCD screen flashes.

Note As any other communication device, avoid any unnecessary contact with the antenna

while your phone is turned on.

Changing the display language

1. In standby mode, press Soft Key 1 Menu.

2. Press , .

3. Set

/English

with and then press Soft Key 1.

Airplane Mode

When your phone is in Airplane Mode, it cannot send or receive any calls or

access online information. You may use the phone’s other features, such as

Game, Scheduler, Memo, etc. When Airplane Mode is enabled, The message is

displayed on the screen “Airplane Mode”.

1. In standby mode, press Soft Key 1 Menu, , , .

2. Select On or Off and press Soft Key 1.

8

BASIC FUNCTIONS

UD6150_Eng_090525 2009.7.23 3:2 PM Page 8

9

Making a Call

Every time you make a call, follow these steps:

1. Make sure that the phone is turned on. If not, hold down for 2 seconds.

2. Type the phone number and then press .

●

If the phone is locked, press Soft Key 2 Unlock and type the 4 digits lock

code.

3. To end the call press .

Receiving Calls

1. When the phone rings or vibrate (if the Vibrate Mode is enabled), press any

key (except ) or depending on the Call setting.

●

When you press once, when a call is received, the phone stops ringing

or vibrating depending on the mode it is in. Press twice to reject the

call.

2. To end an answered call, press .

3. If you are not in the condition to receive call, pressing

Soft Key 2

will send a

Preset SMS to Caller. The SMS can be editted using “Edit SMS on Call Reject”

function given under Settings' Call.

UD6150_Eng_090525 2009.7.23 3:2 PM Page 9

1. Press and select Music Box.

2. Select the song you want to play and press .

G

Press to adjust the volume.

G

Press to pause the music.

G

Press to skip to the previous/next song.

G

Press and hold to rewind/fast forward the current song.

3. Press Left soft key while playing music.

G

Minimize Goes back to the main screen so that you can

continue using your phone as normal.

G

Repeat Mode Set the repeat option.

G

Equalizer Select the desired equalizer.

4. Press to exit the music player.

10

PLAYING MUSIC

UD6150_Eng_090525 2009.7.23 3:2 PM Page 10

11

1. Connect a headset to a headset jack.

2. Press and hold .

3. Press Left soft key to access the following options.

G

Main Screen Goes back to the main screen so that you can

continue using your phone as normal.

G

Switch off Switches off the radio.

G

Edit Channels Adjust and save channels manually.

G

Auto Scanning Auto scan and save channels.

G

Reset All Resets all channels to default mode.

G

Listen Via Listen FM Radio via Speaker or Headset.

G

Record Record a favourite radio show.

4. Press to exit the FM radio.

FM RADIO

UD6150_Eng_090525 2009.7.23 3:2 PM Page 11

12

The Mobile Tracker feature provides you the ability to have a Tracking System for

your mobile in case you lose or stolen by some one.

The moment a new RUIM is inserted with Tracker feature enabled, you will be

prompted to enter the Tracker code during boot-up. After 3 unsuccessful attempts

an SMS is triggered and is sent to your pre-defined numbers and phone will turn off.

1. Soft Key 1 Menu, , , .

2. Enter tracker code.(Default is 0000.)

G

Add Numbers Add numbers to be informed in case you

lose or stolen by some one.(Up to 5, can be

saved.)

G

Edit Message Edit message to be informed in case you

lose or stolen by some one.

G

Set Tracker Select Enable/ Disable.

G

Change Tracker Code Customize tracker code.

Note In case you want to use your phone with new RUIM.

●

It is recommended to do so by disabling the Tracker feature.

●

If the Tracker feature is not disabled you are prompted to input the Tracker code (Default

is “0000”) during phone boot-up.

●

If you don’t remember the Tracker code you can get the same by contacting the

predefined numbers.

TRACKER

UD6150_Eng_090525 2009.7.23 3:2 PM Page 12

1. Names

1. Add Name

2. Find

3. Groups

4. Speed Dial

5. Copy & Move

6. Erase Names

7. My Profile

8. Memory Info

2. Messages

1. Write

2. Inbox

3. Outbox

4. Voice Mail

5. Archive in UIM

6. Drafts

7. Templates

8. SMS Groups

9. Erase Msgs

0

. Msg Settings

3. Call History

1. Missed

2. Received

3. Dialled

4. In Call Memo

5. Call Duration

6. Erase History

4. Display

1.

2. Clock

3. Time & Date

4. Wallpaper

5. Menu Style

6. Rhythmic Lighting

7. LCD Backlight

8. Keypad Backlight

9. Contrast

0. Brightness

5. Organiser

1. Scheduler

2. Memo

3. Alarm

4. Salah Times

6. Profiles

1. Vibrate Only

2. Silent

3. General

4. Outdoor

5. Headset

7. Fun&Util

1. Game

2. Bluetooth

3. Voice Tools

4. Stopwatch

5. Calculator

6. Unit Converter

7. World Clock

8. Multimedia

1. Mp3

2. FM Radio

3. My Stuff

9. Settings

1. My Menu

2. Call

3. Phone

4. Security

MENU TREE

13

UD6150_Eng_090525 2009.7.23 3:2 PM Page 13

14

Entering Information Using

T9 Text Input

In the text input field, press Soft Key 1,

and select entry mode by

pressing Up/Down navigation key.

There are 7 entry mode - T9 Arab, Arab,

T9En, Abc, 123, Symbols, Smileys.

- Shift Key : Used to change the

letter case.

Typing In T9 Mode

For example, to write “Call the office”,

follow these steps:

1. Press: Soft Key 1, to change

letter case to T9En mode.

2. Press: .

3. Press: to complete the word

and add a space.

4. Press:

.

5. Display: Call the office.

Typing In ABC (Multi-tap) Mode

For example, to type “LG”, follow these

steps:

1. Press: Soft Key 1, to change

letter case to Abc mode.

2. Press: to change to ABC Caps

Lock mode.

3. Press: .

4. Display: LG.

ENTERING AND EDITING INFORMATION

UD6150_Eng_090525 2009.7.23 3:2 PM Page 14

15

123 (Numbers) Mode

Type numbers using one keystroke per

number.

To change to 123 mode in a text entry

field, press Soft Key 1, and select

123 mode.

Note You can also easily enter numbers by

long press of corresponding number

keys in T9 Mode or ABC Mode.

Symbols/Smileys Mode

To change to Symbols/Smileys mode in

a text entry field, press Soft Key 1,

and select Symbols or Smileys

mode.

Press to cycle through the

desired items. To select item, Press the

assigned number key.

Typing In T9Arab

For example, to write “ ”, follow

these steps:

1. Press: Soft Key 1, to change

letter case to T9Arab mode.

2. Press: .

3. Display: .

Note

Copy and Paste

1. While you are entering text, press Soft Key 1

and select Copy Text.

2. Press to select the text you wish to

copy. Or press Soft Key 1 All to select all the

text entered.

3. Press Soft Key 1 Ok.

4. Put the cursor at the place to paste the text

using navigation keys and .

5. Press Soft Key 1 and select Paste Text.

UD6150_Eng_090525 2009.7.23 3:2 PM Page 15

16

Write New

Text messages and page messages are all available.

Text is available up to 160 characters.

1. Press Soft Key 1 Menu, or .

2. Select Write.

3. Type your desire message and press Soft Key 1 Options.

G Send Use to send the message.

G Text Mode Use to select text type (entry mode).

G Templates Select a sample message.

G Save Save to Draft message.

G Insert Number Insert the desired number saved in phone.

G Add Signature Insert signature (pre edited in Msg Settings).

MESSAGES

UD6150_Eng_090525 2009.7.23 3:2 PM Page 16

17

4. After selecting Send, enter the contact number where the message is to be sent,

enter the next recipients address by pressing . You can add up to 20

recipients. Press Soft Key 1 Options.

G Send Use to send the message.

G The Last Select a recent sent number.

G SMS Groups Select SMS Group.

G Find Names Select a phonebook entry.

5. After entering the phone number, press Soft key 1 Options and select utility for

your message. Select send to send your message.

G Send Use to send the message.

G Priority Allows you to give the priority to message.

Normal or Urgent or Emergency.

G Delivery Ack Set to On, if you want to know whether the message is

successfully transmitted.

G Save Sent Msg You can save this message in Outbox.

UD6150_Eng_090525 2009.7.23 3:2 PM Page 17

18

Congratulations on your purchase of the UD6150 Cellular phone that has been designed to

operate with the latest digital mobile communication technology, Code Division Multiple

Access (CDMA). The CDMA system has greatly enhanced voice clarity and can provide

various types of advanced features.

This is an advanced and compact phone which has diverse features as follows:

●

Large, easy-to-read, 5 lines display + 1 Icon Line + 1 Menu Line

●

Paging, Messaging, Voice Mail and Caller ID

●

18-key keypad (10 number keys / 2 function keys / 2 Soft keys / 4 way navigation key /

1 OK key / 1 Call key / 1 End key)

●

Long battery stand-by and talk time

●

Menu-driven interface with prompt for easy operation and configuration

●

Any Key Answer, Auto Redial, Speed Dial up to 99 memory locations

●

Optional accessories with greater convenience and enhanced functionality

●

In Call Memo, Game

●

Airplane Mode, Rhythmic Lighting

●

SMS, SMS to Group

●

SMS on call reject

●

MP3/ FM Radio/ Radio Recording

●

Torch Light/ Mobile Tracker

INTRODUCTION

UD6150_Eng_090525 2009.7.23 3:2 PM Page 18

19

Names

AAdddd NNaammee

MMeennuu 11..11

Store up to 1000 contacts, adding 3

phone numbers + E-mail + Memo with

each entry and assign Group + Ring Tone

+ Message Alert Tone to each entry.

User has an option to store Names in

Phone Memory or UIM Memory. Number

of contacts that can be stored in UIM

depends on the UIM memory size. Each

UIM contact entry can have name and

number only.

FFiinndd

MMeennuu 11..22

User can view the list of phone

numbers stored in the Phone and UIM

memories.

GGrroouuppss

MMeennuu 11..33

This is a function for changing Group

Name and setting Ring tones by Group.

SSppeeeedd DDiiaall

MMeennuu 11..44

Speed Dial allows you to make a call

faster by just dialing one or two digit

corresponding number.

Note Speed dial numbers can not be

assigned to UIM entries.

CCooppyy && MMoovvee

MMeennuu 11..55

Select Storage Type between Phone

to UIM and UIM to Phone.

EErraassee NNaammeess

MMeennuu 11..66

Erase names and numbers saved in

phone and UIM.

MENU FEATURES

UD6150_Eng_090525 2009.7.23 3:2 PM Page 19

20

MMyy PPrrooffiillee

MMeennuu 11..77

Store my profile such as name, phone

numbers, E-mail and memo.

MMeemmoorryy IInnffoo

MMeennuu 11..88

This feature allows user to view the

number of records occupied in phone

and UIM memories and Memory status

is indicated by progress bar.

Messages

WWrriittee

MMeennuu 22..11

((RReeffeerr ttoo 1166~~1177 ppaaggee))

Write and send Message.

IInnbbooxx

MMeennuu 22..22

Received Text messages, Page, lists

may be searched, and the contents

may be viewed. Up to 100 can be

stored.

OOuuttbbooxx

MMeennuu 22..33

Up to 15 sent messages can be stored

in the Outbox(and 15 Unsent messages).

VVooiiccee MMaaiill

MMeennuu 22..44

Allows you to view the new voice

messages recorded in the voice mail

box.

AArrcchhiivvee iinn UUIIMM

MMeennuu 22..55

Archives in UIM feature allows the user

to Store (move/copy) selected

messages from Inbox or Outbox to a

Folder "Archive in UIM", which will be

specifically stored in RUIM card,(so

that user can access those selected

messages even if he chooses to use

another Handset with the same RUIM.)

UD6150_Eng_090525 2009.7.23 3:2 PM Page 20

Page is loading ...

LG LGUD6150 Owner's manual

LG LGUD6150 Owner's manual

Related papers

Other documents