LG 34UC79G Owner's manual
- Category
- LED displays
- Type
- Owner's manual
This manual is also suitable for
The LG 34UC79G-B is a high-performance IPS LED monitor with a 34-inch curved screen and a 21:9 aspect ratio, providing an immersive viewing experience for gaming, watching movies, or working on multiple tasks simultaneously. With its QHD (3440 x 1440) resolution and 144Hz refresh rate, it delivers sharp and fluid visuals even in fast-paced games. The monitor also features AMD FreeSync technology, which eliminates screen tearing and stuttering for a smoother gaming experience.
The LG 34UC79G-B is a high-performance IPS LED monitor with a 34-inch curved screen and a 21:9 aspect ratio, providing an immersive viewing experience for gaming, watching movies, or working on multiple tasks simultaneously. With its QHD (3440 x 1440) resolution and 144Hz refresh rate, it delivers sharp and fluid visuals even in fast-paced games. The monitor also features AMD FreeSync technology, which eliminates screen tearing and stuttering for a smoother gaming experience.
www.lg.com
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
34UC79G
ENGLISH
- Product Components- ------------------------- 4
- Supported Drivers and Software- ------------- 5
- Product and Button Description--------------- 6
How to Use the Joystick Button
Input Connector
- Moving and Lifting the Monitor- -------------- 8
- Installing the Monitor - ------------------------ 9
Assembling the Stand
Installing on a Table
Adjusting the Stand Height
Adjusting the Angle
Tidying up Cables
Using the Kensington lock
Detaching the Stand Body
Installing the wall mount plate
Installing on the Wall
- Connecting to a PC- --------------------------16
HDMI connection
DisplayPort connection
- Connecting AV Devices- ----------------------17
HDMI connection
- Connecting Peripherals- ----------------------17
USB Cable connection
Connecting Headphones
Connecting External Speaker
- Activating the Main Menu- ------------------- 19
Main Menu Features
- User Settings- --------------------------------20
Menu Settings
Quick Settings
Input
Picture
General
- Factory Support Mode- ----------------------32
- HDMI Timing (Video)--------------------------32
- Power LED- ----------------------------------- 32
3
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for
dual-mode source devices are all registered trademarks of the Video Electronics Stan-
dards Association.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers
Forum, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to
display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENGLISH
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are missing com-
ponents, contact the retail store where you purchased the product. Note that the product and components may look
different from those shown here.
Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommend that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
The components may look different from those illustrated here.
Without prior notice, all product information and specifications contained in this manual are subject to change to
improve the performance of the product.
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from
which you purchased the product.
The power cord provided may differ depending upon the region.
CAUTION
NOTE
CD(Owner's Manual) /
Card
Cable Holder Mouse HolderDisplayPort Cable
Stand BaseStand Body
Power Cord
AC-DC Adapter HDMI Cable
5
ENGLISH
Supported Drivers and Software
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product
package.
y
Required and Recommended: You can download and install the latest version from the enclosed CD or from the
LGE website
(www.lg.com)
.
y
Optional: You can download and install the latest version from the LGE website
(www.lg.com)
.
Drivers and Software Installation Priority 34UC79G
Monitor Driver Recommended O
ASM Driver Required X
OnScreen Control Recommended O
Dual Controller Optional O
True Color Pro Optional X
ENGLISH
Power LED
On: power is on
Off: power is off
Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
Press the joystick button once with your finger to turn on the
monitor.
Press and hold the joystick button once with your finger to turn off the
monitor.
◄/►
You can control the volume by moving the joystick button left/right.
ENGLISH
The joystick button is located at the bottom of the monitor.
ENGLISH
When moving or lifting the monitor, follow these in-
structions to prevent the monitor from being scratched
or damaged and to ensure safe transportation, regard-
less of its shape or size.
Avoid touching the monitor screen as much as
possible.
- This may result in damage to the screen or some
of the pixels used to create images.
Place the monitor in the original box or packing
material before attempting to move it.
Before moving or lifting the monitor, disconnect the
power cord and all other cables.
Hold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
When holding the monitor, the screen should face
toward you to prevent it from being scratched.
When transporting the monitor, do not expose the
monitor to shock or excessive vibration.
When moving the monitor, keep it upright and
never turn the monitor on its side or tilt it sideways.
If you use the monitor panel without the stand
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
9
ENGLISH
Installing the Monitor
Assembling the Stand
y
To protect the screen, place the screen face down
on the screen pad which is inside the box.
CAUTION
1
3
2
Stand Hinge
Stand Body
Stand Base
or
Cable Holder
* Assemble the Cable Holder.
ENGLISH
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
Applying excessive force when tightening screws
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
Do not carry the monitor upside down by just
holding the base. This may cause the monitor
to fall off the stand and could result in personal
injury.
When lifting or moving the monitor, do not touch
the monitor screen. The force applied to the
monitor screen may cause damage to it.
4
5
Press the stand until the button reaches the top.
ENGLISH
2
1
3
1
Lift the monitor and place it on the table in an
upright position. Place the monitor at least 100 mm
away from the wall to ensure sufficient ventilation.
2
Connect the power adapter to the monitor and then
plug the power cord into the wall outlet.
Unplug the power cord before moving or installing
the monitor. There is risk of electric shock.
Make sure to use the power cord that is provided in
the product package and connect it to a grounded
power outlet.
If you need another power cord, please contact
your local dealer or the nearest retail store.
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
100-240 V ~
ENGLISH
20° -5°
1
Place the monitor mounted on the stand base in an
upright position.
2
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or
backward from -5° to 20° for a comfortable viewing
experience.
1
Place the monitor mounted on the stand base in an
upright position.
2
Handle the monitor with both hands for safety.
To avoid injury to the fingers when adjusting the
screen, do not hold the lower part of the monitor's
frame as illustrated below.
Be careful not to touch or press the screen area
when adjusting the angle of the monitor.
When adjusting the screen height,
do not place your hand on the
stand body to avoid injury to your
fingers.
ENGLISH
The Kensington security system is optional. You can
obtain optional accessories from most electronics
stores.
The left or right side of the monitor head can be
slightly rotated up or down (up to 3°). Adjust the
horizontal level of the monitor head.
The connector for the Kensington security system is
located at the bottom of the monitor.
For more information on installation and usage, refer to
the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington
security system cable.
Arrange the cables using the cable holder and mouse
holder as shown in the illustration.
ENGLISH
This monitor meets the specifications for the wall mount
plate or other compatible devices.
1 Place the screen face down. To protect the monitor
panel (screen), cover the surface with a soft cloth or
the monitor protection pad included in the product
package.
2 Remove the four screws tightened on the back of the
monitor.
3 Place the wall mount plate onto the monitor and align
it with the screw holes.
4 Tighten the four screws using a screwdriver to fix the
plate to the monitor.
1
Place the monitor’s screen face down. To protect the
screen from scratches, cover the surface with a soft
cloth.
2
Remove the stand from the monitor by pressing
the button on the bottom center of the back of the
monitor.
The wall mount plate is sold separately.
For more information on installation, refer to the
wall mount plate’s installation guide.
Be careful not to apply too much force while
mounting the wall mount plate as it may cause
damage to the screen.
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1 If you use screws longer than the standard length, it
may damage the inside of the product.
2 A non-VESA standard screw may damage the product
and cause the monitor to fall. LG Electronics is not
liable for any accidents relating to the use of non-
standard screws.
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed instal-
lation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how
to install and set up a tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
100 x 100
M4 x L10
4
RW120
ENGLISH
Unplug the power cord before moving or installing
the monitor to avoid electric shock.
Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling
off, which could lead to injury. Use an authorized
LG wall mount and contact the local dealer or
qualified personnel.
Applying excessive force when tightening screws
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
When measured from the back of the monitor, the
length of each installed screw must be 8 mm or
less.
Use the screws specified by VESA standards.
The wall mount kit includes the installation guide
and all necessary parts.
The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
For more information, please refer to the user
manual for the wall mounting bracket.
Wall Mount Plate
Wall Mount Plate
Back of the Monitor
Back of the
Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
The following instructions are based on the
34UC79G model. Illustrations in this manual may
differ from the actual product.
Press the joystick button, go to
→
, and
then select the input option.
Do not press the screen for a prolonged time. This
may cause image distortion.
Do not display a still image on the screen for a
prolonged time. This may cause image retention.
Use a screensaver if possible.
When connecting the power cord to the outlet,
use a grounded (3-hole) power strip or a grounded
power outlet.
The monitor may flicker when turned on in an area
where the temperature is low. This is normal.
Sometimes red, green, or blue spots may appear on
the screen. This is normal.
ENGLISH
This monitor supports the *Plug and Play feature.
*Plug and Play: A feature that allows you to add
a device to your computer without having to
reconfigure anything or install any manual drivers.
DP OUT
Transmits digital video and audio signals from your PC
to the monitor. Connect the monitor to your PC using
the DisplayPort cable as shown in the illustration below.
There may be no video or audio output depending
on the DP (DisplayPort) version of the PC.
Make sure to use the supplied DisplayPort cable of
the product. Otherwise, this may cause the device
to malfunction.
For using Mini DP to DP (Mini DisplayPort to
DisplayPort) cable, it is recommended that you use
DisplayPort 1.2 cable.
Transmits digital video and audio signals from your PC
to the monitor. Connect your PC to the monitor using
the HDMI cable as shown in the illustration below.
Make sure to use the supplied HDMI cable of the
product. Otherwise, this may cause the device to
malfunction.
Connecting your PC to the monitor using the HDMI
cable may cause device compatibility issues.
Using a DVI to HDMI / DP (DisplayPort) to HDMI
cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the screen
may not display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI
®
/
TM
cable
- High-Speed HDMI
®
/
TM
cable with Ethernet
ENGLISH
HDMI transmits digital video and audio signals from
your AV device to the monitor. Connect your AV device
to the monitor using the HDMI cable as shown in the
illustration below.
The USB port on the product functions as a USB hub.
To use USB 3.0, connect the A-B type USB 3.0 cable of
the product to the PC.
Peripheral devices connected to the USB IN port can be
controlled from the PC.
AV
AV
Make sure to use the supplied HDMI cable of the
product. Otherwise, this may cause the device to
malfunction.
Using a DVI to HDMI / DP (DisplayPort) to HDMI
cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the screen
may not display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI
®
/
TM
Cable
- High-Speed HDMI
®
/
TM
Cable with Ethernet
(sold separately)
(sold separately)
ENGLISH
(sold separately)
(sold separately)
Connect peripherals to the monitor via the headphones
port. Connect as illustrated.
Connect peripherals to the monitor via the lineout port.
Connect as illustrated.
Peripheral devices are sold separately.
If you use angled earphones, it may cause a
problem with connecting another external device
to the monitor. Therefore, it is recommended to use
straight earphones.
Depending on the audio settings of the PC and
external device, headphones and speaker functions
may be limited.
(sold separately)
Make sure to install the most recent Windows OS
service pack before using the product.
Peripheral devices are sold separately.
A keyboard, mouse, or USB device can be connected
to the USB port.
is available through the USB1 and
USB2 port.
When the Monitor is gone to Power off,
is not available.
The charging speed may vary depending on the
device.
Cautions When Using a USB Device
A USB device with an automatic recognition
program installed, or that uses its own driver, may
not be recognized.
Some USB devices may not be supported or may
not work properly.
It is recommended to use a USB hub or hard disk
drive with power supplied. (If the power supply
is not adequate, the USB device may not be
recognized properly.)
ENGLISH
Power Off
MenuInput Exit
Game
Enables the main menu.
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off the
monitor this way at any time, including when the OSD is on.)
Power Off
MenuInput Exit
Game
◄
Adjusts the monitor volume level.
Enters the feature.
►
Adjusts the monitor volume level.
Enters the features.
Power Off
MenuInput Exit
Game
▲
Displays information on the current input.
Turns off the monitor.
▼
Displays information on the current input.
Enters the features.
Configures the screen settings.
Sets the picture mode for gaming.
Sets input mode.
Turns off the monitor.
Exits the main menu.
1
Press the joystick button on the bottom of the monitor.
2
Move the joystick up/down (
▲
/
▼
) and left/right(
◄
/
►
) to set the options.
3
Press the joystick button once more to exit the main menu.
Joystick Button
Power Off
MenuInput Exit
Game
Power Off
MenuInput Exit
Game
ENGLISH
1
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the .
2
Configure the options by moving the joystick up/down/left/right.
3
To return to the upper menu or set other menu items, move the joystick to
◄
or pressing ( / Ok) it.
4
If you want to exit the OSD menu, move the joystick to
◄
until you exit.
•
When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen.
Each option is described below.
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
•
You can adjust / by moving the joystick button to
▼
in the menu.
Selects the input mode.
Adjusts the aspect ratio of the screen.
When automatic input switch is set to , display will automatically switch to new input
when connected.
Changes the picture mode to the one optimized for a given feature.
Adjusts the and
.
Adjusts the , , , and
.
Adjusts the , ,, and .
Returns picture to the default settings.
Sets , , , ,
, , , , and .
◄
Exits the OSD menu.
•
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
LG 34UC79G Owner's manual
- Category
- LED displays
- Type
- Owner's manual
- This manual is also suitable for
The LG 34UC79G-B is a high-performance IPS LED monitor with a 34-inch curved screen and a 21:9 aspect ratio, providing an immersive viewing experience for gaming, watching movies, or working on multiple tasks simultaneously. With its QHD (3440 x 1440) resolution and 144Hz refresh rate, it delivers sharp and fluid visuals even in fast-paced games. The monitor also features AMD FreeSync technology, which eliminates screen tearing and stuttering for a smoother gaming experience.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
