User Manual

PC6172: 17” Core 2 Duo touch Panel PC

1-2-2 I/O System.......................................................................................................................................1

1-2-3 System Specification.....................................................................................................................2

1-3 Front View & I/O Outlets.................................................................................................................2

1-3-1 Front View.......................................................................................................................................2

1-3-2 I/O Outlets.......................................................................................................................................3

1-4 Package List..................................................................................................................................4

CHAPTER 2 Hardware Installation

2-1 Installing the CPU & DRAM...........................................................................................................5

2-2 Installing the Hard Disk Drive.......................................................................................................12

2-3 Serial Port Interface......................................................................................................................16

2-7-3 Rack Mount....................................................................................................................................21

CHAPTER 3 Phoenix-Award BIOS Utility

3-1 Entering Setup...............................................................................................................................22

3-2 Control Keys........................................................................................... .......................................23

3-3 Getting Help....................................................................................................................... ...........23

3-4 The Main Menu..............................................................................................................................24

3-5 Standard CMOS Setup Menu........................................................................................................25

3-6 Advanced BIOS Features..............................................................................................................27

3-7 Advanced Chipset Features..........................................................................................................31

3-8 Integrated Peripherals....................................................................................................................32

3-15 Save & Exit Setup..........................................................................................................................43

3-16 Exit Without Saving........................................................................................................................44

CHAPTER 4 Driver Installation

4-1 System...........................................................................................................................................45

4-2 Touch Screen.................................................................................................................................45

4-2-1 Speicfication..................................................................................................................................45

4-2-2 Driver Installation Windows 2000/XP/Vista.................................................................................46

4-2-3 Driver Installation...........................................................................................................................48

Appendix: Power Supply Secifications...............................................................51

1-1 General Description

The final page of this chapter will indicate how to avoid damaging this board.

-Chapter 2 Hardware Configuration

This chapter outlines the component locations and their functions. In the end of this chapter, you will

learn how to set jumper and how to configure this card to meet your own needs.

-Chapter 3 Software Utilities

This chapter contains helpful information for proper installations of the VGA utility, LAN utility, Sound

utility, and Flash BIOS Update. It also describes the Watchdog-timer configuration.

-Chapter 4 Award BIOS Setup

This chapter indicates you how to set up the BIOS configurations.

-Appendix A Expansion Bus

- CHIPSET: Intel® 945GME + ICH7R (FSB: 533/667MHz)

- MEMORY : 2 x 200-pin DDR2 SO-DIMM. Support DDR II 667 SDRAM up to 4GB.

- CACHE : Built-in CPU.

- REAL-TIME CLOCK : 256-byte battery backed CMOS RAM. Hardware implementation to indicate

century rollover.

- BIOS : Phoenix-AwardBIOS™ for plug & play function. 8MB with VGA BIOS. Easy update 512KB

flash EEPROM. Support S/IO Setup.

- KEYBOARD CONNECTOR : Mini DIN connector. Supports for AT/PS2 keyboard.

- MOUSE CONNECTOR : Mini DIN connector. Supports for PS/2 Mouse.

- BUS SUPPORT : 1 PCI-E (x16) Slot (SDVO), CF (only available if no IDE device attached)

- DISPLAY : Built-in Intel 945GME, support for CRT, LVDS, TV-Out. Onboard 15-pin VGA D-SUB

COM1/2:RS-232. MIDI Compatible. Programmable Baud Rate Generator

- SOUND : Realtek ALC655 (AC'97 Codec).

Fully Compliant AC'97 Analog I/O Component

16-Bit Stereo Full-Duplex Codec.

1-3 Safety Precautions

Four Analog Line-level Stereo Inputs for Connection.

High Quality CD Input with Ground Sense. Stereo Line-Level Output

Interface: Line-In, Line-Out, Microphone.

- HARDWARE MONITORING FUNCTION : Monitor Voltage, CPU temperature, & Cooling fan speed.

If CPU Temperature is over setting, the buzzer will send out a warming (only under DOS system).

- INTERRUPT LEVELS : 15

- OPERATING TEMPERATURE : 0 to 60°C.

- BOARD DIMENSIONS : 170 mm x 170 mm, 6.69" x 6.69"

- BOARD NET WEIGHT : 810 gram.

Follow the messages below to avoid your systems from damage:

1. Keep your system away from static electricity on all occasions.

2. Prevent electric shock. Don't touch any components of this card when the card is power-on. Always

disconnect power when the system is not in use.

3. Disconnect power when you change any hardware devices. For instance, when you connect a

jumper or install any cards, a surge of power may damage the electronic components or the whole

(with a metal contact inside), you are able to connect the pins.So you can set-up your hardware

configuration by "open" or "close" pins.

The jumper can be combined into sets that called jumper blocks. When the jumpers are all in the

block, you have to put them together to set up the hardware configuration. The figure below shows

how this looks like.

JUMPERS AND CAPS

If a jumper has three pins (for examples, labeled PIN1, PIN2, and PIN3), You can connect PIN1 & PIN2

to create one setting by shorting. You can either connect PIN2 & PIN3 to create another setting. The

same jumper diagrams are applied all through this manual. The figure below shows what the manual

diagrams look and what they represent.