3034D
Features
Optional Accessories
Contact:
• 3 or 4 thread, cut and sew overlock stitches
• F.A.S.T. (Fast and Simple Threading) lower looper threading system
• 4 colour threading guide
• Perfect overlock stitches on all types and weights of fabric
• Stitch width 5.0 - 7.0mm
• Differential feed for perfect seams on virtually any fabric type
Eliminates the wavy or stretched appearance of stitches on fabrics
• Retractable knife
• Free arm flat bed
• Built in light to illuminate the sewing area
• Trim trap for catching scraps of fabric and storage of the foot
controller when the machine is not being used.
• Thread twist protection and needle plate separation for improved
sewing quality
• Lightweight, compact machine with carry handle
• Presser foot pressure adjustment
• Blind stitch foot for finishing and hemming in one operation
• Common snap on presser foot
• Tool kit
• Built in accessory storage
• Dust cover
• Instructional DVD
Stitch Selection
The Brother 3034D overlocker sews seams, trims excess
fabric and overlocks raw edges, all in one easy step.
Featuring 3 or 4 thread cut-and-sew over lock stitches, easy-
to-follow threading and F.A.S.T. lower looper threading system.
With the free-arm/flat bed convertible sewing surface for easy
control when over locking cuffs and sleeves, you'll save time
and produce professional results.
Taping (Elastic) Foot - To attach
tapes and elastic to stretch fabrics
Piping Foot - To attach piping
between two layers of fabric
Pearls and Sequins Foot - To
attach pears and Sequins to fabric
Gathering foot - For gathering
and sewing in one operation.
4 thread overlock 3 thread overlock 5mm 3 Thread Overlock 2.8mm Rolled Hemming
Blind Hemming Pin Tucks Flat lock Narrow Hemming
4 colour easy threading guide
Pressure control
Easy access controls
Thread twist protection
Trim Trap
Built-in accessory
storage