Sony VCT-SP2BP Datasheet

Category
Camera kits
Type
Datasheet
VCT-SP2BP
VCT-SP1BP
Camcorder Support
2
Two-way Camcorder Support System
Sonys new VCT-SP2BP camcorder support is designed to smoothly integrate
with consumer and professional tripod heads. A quick release system allows
camera operators to easily follow the action from tripod to stabilized handheld
shooting and back again.
Easy transformation from tripod operation
style to shoulder support style
Preset the shoulder pad to fit your size
VCT-SP2BP
Minimum length (Approx.)
359 mm
Chest pad opening angle
0° ~ 90°
Chest pad opening
stiffness adjusting dial
Minimum length (Approx.)
249 mm
Maximum length (Approx.)
363 mm
Maximum length (Approx.)
470 mm
Chest pad adjust lock
Shoulder pad preset screw
Tripod attachment
screw
Shoulder pad adjust lock
Perfect Design for Both Shoulder Support and Tripod Usage
Comes with various adaptors
Adjust the length of the shoulder pad
and fix it using a screw
1. Easily detach the
camcorder from tripod
5. A three point support is
achieved using the
“shoulder”, “chest” and
“your hand”
2. Stretch out the shoulder
pad and put camcorder
on shoulder
* Instant support is available using only the
shoulder pad
3. Lower the chest pad
4. Stretch out the chest pad
Comes with VCT-U14 Adaptor
Comes with an
accessory adaptor
Various accessories can be
mounted
Ex. Wireless microphone receiver
Screw the accessory adaptor on to VCT-SP2BP
3
Multi-purpose Camcorder Support System
Weight Support for Stable and Comfortable Shooting
VCT-SP1BP is a weight support system for handheld camcorders.
Shoulder and hip weight distribution reduce hand/arm load weight.
Maintain Shooting Mobility
Comfortable and portable, the monopod system provides
mobility to allow flexible shooting styles.
Easy set-up with one action harness connection attach/
detach system.
Nomal Shooting
High Angle Shooting Monopod Shooting
Quick shoe plate
Slide bolt
For weight balance
Screw a bolt by fingers
Left side
tilt lock lever
Safety lock
Quick shoe
lever
Counter balance
adjustment
Lever type
adjustment
Carbon shaft
Oil fluid head
(tilt)
Rubber foam
Two bolts (removable)
For more stable attach
1670 mm
522 mm
VCT-SP1BP
Remote Control Capability
Remote Commander
®
unit RM-1BP is supplied with this
system. You can remotely control the basic functions of your
camcorder such as record start/stop, zoom and focus.
This is especially useful for high angle shooting where you
cannot operate your camcorder directly,
Supports Varieties of Shooting Styles
Using the VCT-SP1BP, you have the flexibility to move around
while maintaining a stable shot even in crowded areas.
Three main shooting styles are possible with the VCT-SP1BP.
1. Normal shooting
2. High angle shooting
3. Monopod shooting
Perfect Design as a Camcorder Monopod
One Snap action
Easy setting
SNAP!!
Remote Commander
®
unit RM-1BP is supplied
20 5/8 (522)
3 1/8 (88)
4 7/8 (121)
VCT-SP1BP
Monopod
Dimension (Approx.) Max. Height 65 7/8, Min. Height 20 5/8 inches
(1670, 522 mm)
Weight (Approx.) 2 lb14 oz (1.3 kg)
Maximum Load 5 kg (
Not only camera, but all attached load
)
Tilting Angle <Down> 60 degrees
Tilting Angle <Up> 45 degrees
Remote Controller
Rec. Start / Stop Rec. Start / Stop
Zoom Variable Zoom
Other functions Zoom Speed (3steps),
Zoom Direction Switch, Rec Review, Focus
Length of Cord (Approx.)
39 3/8 inches (1000 mm)
Specifications Specifications
Unit: inches (mm)
DIMENSIONS
VCT-SP2BP
Dimension (Approx.) W 14 1/4 x H 2 1/8 x D 5 3/8 inches
(359 x 52 x 134 mm)
Weight (Approx.) 29.6 oz (840 g)
Maximum Load 4 kg (
Not only camera, but all attached load
)
9 7/8 (249)
4 1/2 (114)
14 1/4 (359)
14 3/8 (363)
18 5/8 (470)
4 1/2 (114)
3 1/2 (89)
3 (75)
5 3/4 (144)
5 3/4 (143)
2 1/8 (52)
5 3/8 (134)
4 3/4 (120)
Unit: inches (mm)
DIMENSIONS
Need good weight support?
Need long
time weight
support?
Need a compact system?
Want to
use a
tripod
as well?
VCT-SP1BP
VCT-SP1BP
VCT-SP2BP
VCT-SP2BP
Want to
take high angle
shots?
Want to
attach
accessories?
VCT-SP2BP & VCT-SP1BP
Comparison chart
V-2464 (MK10678V1)
©2010 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, "make.believe" and their respective logos and Remote Commander are trademarks of Sony.
Printed in USA (4/10)
1 / 1

Sony VCT-SP2BP Datasheet

Category
Camera kits
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document