Whirlpool AWG 5060 Owner's manual

Type
Owner's manual

This manual is also suitable for

AWG 5600 PROGRAM CHART
A. Programme knob
B. Start/pause button
C. Option buttons
D. Programme ready / pause light
E. Programme end light
PROGRAM TYPE OF LAUNDRY
MAX DRY
LOAD
CAPACITY
(kg)
DETERGENTS AND ADDITIVES SPECIAL OPTIONS
MAX.
SPIN
SPEED
RPM
TEMPERATURE
°C
PRE-WASH
1
MAIN WASH
2
SOFTENER NO SPIN COLD WASH
1-COTTON
Dirty, boil, cotton and linen textile
5
-
YES
+ + +
600 90
2-COTTON
(PREWASH)
Very dirty, cotton, coloured and linen textile
5 YES YES
+ + +
600 60
3-COTTON
Dirty, cotton, coloured and linen textile
5
-
YES
+ + +
600 60
4-COTTON
Dirty, cotton, coloured and linen textile
5
-
YES
+ + +
600 40
5-ECO WASH
Dirty, cotton, coloured and linen textile
5
-
YES
+ + +
600 40
6-QUICK WASH
Slightly dirty, cotton, coloured and linen textile
2,5
-
YES
+ + +
600 30
7-COTTON COLD
Slightly dirty cotton, coloured and linen textile.
Washed without heating the tap water.
5
-
YES
+ + +
600 COLD
8-SYNTHETIC
Dirty, synthetic or synthetic mixture textile
3
-
YES
+ + +
600 60
9-SYNTHETIC
Slightly dirty, synthetic or synthetic mixture
textile
3
-
YES
+ + +
600 40
10-SYNTHETIC
COLD
Slightly dirty, synthetic or synthetic mixture
sensitive laundry.Washed without heating the
tap water.
3
-
YES
+ + +
600 COLD
11-DELICATE
Slightly dirty, cotton, coloured, synthetic or
synthetic mixture sensitive laundry
2
-
YES
+ + +
600 30
12-WOOL
Dirty, hand and machine to wash wool
laundry
2
-
YES
+ + +
600 30
+: optional / Yes: dosing required
B
E
D
A
C
PROGRAM TYPE OF LAUNDRY
MAX DRY
LOAD
CAPACITY
(kg)
DETERGENTS AND ADDITIVES SPECIAL OPTIONS
MAX.
SPIN
SPEED
RPM
TEMPERATURE
°C
PRE-WASH
1
MAIN WASH
2
SOFTENER NO SPIN COLD WASH
13-RINSING
When you need an additional rinsing to be
done to your clothes after the washing
process, you can use this program for all
kinds of clothes.
5
-
YES
+ + +
600 COLD
14-SPINNING
When you need an additional spinning to be
done to your clothes after the washing
process, you can use this program for all
kinds of clothes.
5 - YES
- - -
600 -
15-DRAINING
This program is used to drain the dirty water
inside after the washing process of your
machine. If you want the water inside your
machine to be drained before the program
ends, you can use this program.
5
-
YES
- - -
- -
+: optional / Yes: dosing required
Program
Max.
T(°C)
Max.Load
(kg)
Total Water
Consumption
(lt)
Max.energy
(kwh)
Total
time
(min)
Number
of Rinse
1-COTTON 90°C
83
75
1,96
155
3
2-COTTON 60°C
PRW 57
5
74 0,89 140 3
3-COTTON 60°C
57
43
0,85
190
2
4-COTTON 40°C
40
45
0,82
180
2
5-ECO WASH
40
43
0,39
80
2
6-QUICK WASH
25
40
0,16
30
2
7-COTTON
COLD
WIT
5
56
0,17
110
3
8-SYNTHETICS
60°C 55
3
45 0,95 84 2
9-SYNTHETICS
40°C
40
5
45
0,53
65
2
10-SYNTHETICS
COLD
WIT
3
45
0,12
72
2
11-DELİCATE
30'C
30
2
56
0,34
70
3
12-WOOL 30°C
29
52
0,29
73
3
13-RINSE
WIT
41
0,04
28
3
14-SPIN
-
-
0,02
10
-
15-DRAIN
-
-
0,01
2
-
Temperature may vary depending on the heating time
Durations may vary according to wash load (weight and type), tap water, ambient temperature
and
selected extra functions.
CONSUMPTION DATA
SELECT ANY DESIRED OPTION
In order to select an additional option:
Press once the additional option button you wish to select.
If the lamp above the option button stays on it means you
have selected the option you wished to select.
If the lamp above the option button is not turned on means
you cannot use that additional option for the wash
programme you selected.
No spin” button
This program is recommended to be used for your sensitive
clothes on which no spinning should be done. By pressing
this function button, you can cancel the spinning process
which is included in the program.
Cold Wash” button
When this button is pressed, your clothes are washed with
cold water. With this function, you can wash your slightly
dirty clothes using less energy and water.
PROGRAMME START
Start the selected programme by pressing the
“Start/Pause” button.
When the programme you selected starts its operation the
lamp above theStart/Pausebutton will light up.
When you wish to put the selected programme on pause
press the “Start/Pause” button once. Programme ready
light will light up. In order to restart the programme from the
point it was put on pause at you will have to press the
“Start/Pause” button once again.
PROGRAMME END
Your machine will stop automatically when the programme
you selected has finished.
The programme end light will light up.
Bring the programme knob to the STOP (Off /”O”) position.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE
PROGRAMME
Add detergent as indicated on the front page and as described in your Instructions for Use.
Close the door and turn the programme knob to the desired programme.
When you turn the programme knob to the desired programme, “programme ready”
light will stay on.
Programme ready light will light up.
The door lock of your machine will automatically release about two minutes after the
programme has finished. You can open the door and take out the laundry by pulling
the door handle towards yourself.
After you have taken out the laundry leave the door open so that the machine interior
can dry.
Unplug the machine.
Turn off the water tap.
CANCEL A RUNNING PROGRAMME/SELECT A NEW PROGRAMME
If you want a certain programme in progress to finish early:
Press the start/pause button.
Turn the programme knob to STOP (Off / ”O) status.
Turn the programme knob to “Draining” or “Spinning” programs.
The programme ready light will be on.
Run the program you have selected by pressing the start/pause button.
CHILD LOCK
Your machine is equipped with a child lock in order to prevent a programme's
operation from
being affected by a push on a button during a wash operation. The
child lock will become active after pressing the first and third button from the left
simultaneously and for at least three seconds while a programme is running.
You can verify the activation of the child lock by checking lamps of the operation
buttons which will flash for two seconds. In order to deactivate it you will have to press
the same buttons at the same time. You can check whether it is deactivated by
checking out the start/pause lamp which will flash.
AUTOMATIC FAILURE DETECTION SYSTEM
Your machine is equipped with systems which will both take the necessary
precautions and warn you in case of any failure by controlling itself constantly during
the washing processes.
When a failure condition is detected, the “start/pause”, “programme ready”,
“programme end” lights blink according to a codification that identifies the failure
causes.
Refer to the “Troubleshooting Guide” in your Instructions for Use for the failure codes
and
contact your After-Sales Service.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Whirlpool AWG 5060 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI