AEA15
ACOUSTIC AMPLIFIER
USER MANUAL
PAGE 1
ContEnts
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
AEA15 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PANEL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
MP3 INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PAGE 2
IntRoDUCtIon
Ashton is designed in Australia by a team of industry experts that have years of experience
in the development, design and production of musical instruments and equipment. Ashton’s
range of amps are a result of years of development and careful testing. Every Ashton
product is designed with value in mind and features the highest quality materials available.
This manual will help you understand some of the great features of your amp.
Enjoy,
The Ashton Team
AEA15 sPECIFICAtIons
15W RMS @ 4 ohms
6.5” Speaker
3-Band EQ
Chorus with depth control
AUX input
1/8” MP3 input (stereo)
Headphone output
PAGE 3
PAnEL DEsCRIPtIon
\
1. INPUT: This is a standard ¼” jack input. Plug your instrument into this input..
2. BASS: This adds or subtracts bass frequencies from the signal.
3. MIDDLE: This adds or subtracts middle frequencies from the signal.
4. TREBLE: This adds or subtracts treble frequencies from the signal.
5. CHORUS DEPTH CONTROL: This controls the depth level of the chorus effect.
6. VOLUME: This adjusts the overall volume of your amplifier.
7. PHONES: ¼” jack output for headphones.
8. POWER: This switch will turn your amplifier on/off.
9. AC POWER CORD
10. MP3 INPUT: 1/8” input for MP3 player connection.
11. AUX INPUT: ¼” jack input for external device connection.
PAGE 4
MP3 InPUt
CONNECTING THE MP3 PLAYER TO THE AMPLIFIER:
To connect your MP3 player to the AEA15 amplifier you will need to purchase the
appropriate cable:
• Most MP3 players require a 1/8” stereo to 1/8” stereo cable. An Ashton SC88
1/8” stereo to 1/8” stereo cable (pictured below) can be purchased at your
nearest Ashton dealer.
• The MP3 input can also be used to input other AUX devices, such as CD player
units; you will need to purchase the appropriate cable for the device you wish to
plug into the amplifier.
tRoUBLEsHootInG
If you are experiencing problems with your Ashton amplifier, please follow these
instructions before contacting a service technician:
1. Check that the power cord is plugged into a power outlet.
2. Check that the power is turned on at the outlet. If you are at a gig, make sure the
stage power has been turned on.
3. Check that the control knobs have been sufficiently turned up.
4. Check that the instrument is correctly plugged into the amplifier, both at the
instrument nand at the amplifier input.
5. Check the instrument lead - faulty leads are one of the most common causes of
problems. Always carry a spare working lead for this purpose.
6. Check that the volume is turned up on the instrument.
7. If the instrument has active pickups, make sure the battery is not dead.
If your amplifier still does not function, contact your local Ashton dealer, or an authorized
service agent.
PAGE 5
sAFEtY InFoRMAtIon
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Raypak 40 - 139 Gallon User manual
-
Wiley 978-0-470-62183-7 Datasheet
-
Roland CUBE-30X Owner's manual
-
Kustom KG100FX112 User manual
-
-
MULTIQUIP EM-900SD User manual
-
Roland CUBE-20x Owner's manual
-
-
-
