BT-201
noise canceling
wireless headset
WARRANTY INFORMATION
Please visit our website at:
www.AndreaElectronics.com/warranty.htm
for all warranty information.
TECHNICAL SERVICE
We hope that you enjoy your Andrea
Bluetooth
®
Headset Model BT-201. If you have
additional questions, please visit our website
at:
www.AndreaElectronics.com or call Andrea
Electronics Corporation's Technical Service
team at 1-800-442-7787 (USA & Canada) for
assistance.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its
literature, indicates that it should not be
disposed with other household wastes at the
end of its working life.
To prevent possible harm to the environment
or human health from uncontrolled waste
disposal, please separate this from other types
of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the
retailer where they purchased this product,
or their local government office, for details
of where and how they can take this item for
environmentally safe recycling. Business users
should contact their supplier and check the
terms and conditions of the purchase contract.
This product should not be mixed with other
commercial wastes for disposal.
Bluetooth
®
is a trademark owned by Bluetooth
SIG, Inc.
Please read this user's guide to get started, and
to make the best use of the headset's many
features.
BEFORE USING YOUR HEADSET
Checking phone compatibility.
Your headset is compatible with most
Bluetooth
®
phones that are compliant with
Bluetooth
®
version 2.1 and support the headset
and/or hands-free profile(s). Ensure that your
phone has Bluetooth
®
capability by visiting your
phone manufacturer's web Site.
Congratulations on your
purchase of the Andrea
PureAudio
®
Bluetooth
®
Headset
Model BT-201!
C46-5455
Package includes: One (1) BT-201 Headset, and
One (1) BT-201 Publication, USB cable, AC wall
charger, set of ear seals, and ear hooks.
HOW TO USE YOUR ANDREA
BLUETOOTH MONO HEADSET BT-201.
Headset Overview
CHARGING THE HEADSET
Your headset uses a rechargeable battery.
You must charge the battery fully before
using the headset for the first time.
1. Plug the USB cable into a
PC’s/Laptop’s USB port or use the
1. LED Indicator Light
2. Multi-Function Button
3. Volume Control Button
4. Charging Socket
5. Noise Cancelling Microphone
2. Connect the cable with the headset as
shown on the picture. The red LED
indicator of headset will turn on when
charging.
3. When the battery is full, the red LED
indicator of the headset will turn off.
4. The headset will be fully charged in
approximately 2 hours.
5. Remove the cable from the headset.
WARNING: Do not attempt to charge
the headset with anything other than
the USB charger cable provided. Using
unauthorized USB charger cable may
damage the headset.
IMPORTANT: The headset cannot be
used while charging.
PAIRING WITH YOUR BLUETOOTH
PHONE
Pairing will create a unique and encrypted
wireless link between two Bluetooth
enabled devices, such as your Bluetooth
phone and Bluetooth enabled computer.
1. Turn on headset,
then push and hold
multifunction button
untill red and blue
blinking occurs.
2. Select add new
device from bluetooth
phone settings.
3. The two devices will
locate and connect
automatically.
Bluetooth
Bluetooth
Paired Devices
On
Add New Dev ice
Yes
Discoverable
Bluetooth
Paired Devices
On
Add New Device
Yes
Discoverable
Bluetooth
IMPORTANT: If pairing was successful,
the indicator light will flash in blue 10
times rapidly before going to flashing once
every 3 seconds. Most phones will display
an icon when paired.
inluded AC wall adapter.
Enhanced features (for Bluetooth
phones with hands-free profiles)
To Press and Hold
Redial last number
the volume control
button [ - ] for 3
seconds and then
release.
Reject an incoming
Call
Adjust the volume
Answer a second
call
When you receive a
call, press and hold
the Multi-Function
Button for 3 seconds
to reject the call.
Press Volume
Control Button [+]
on the side of the
headset to increase
the volume level
and press Volume
Control Button [-] to
decrease the volume
level.
When your phone
notifies you of
another incoming
call while you are on
a call, press and hold
the Multi-Function
button for 2 seconds.
You can switch
between calls by
pressing and holding
it for 2 seconds.
supported.
To Press and Hold
Place a call on hold
While you are on a
call, press and hold
the Multi-Function
button for 2 seconds.
To retrieve the call,
press and hold the
Multi-Function button
for 2 seconds again.
Using the phone’s
keypad.
1. Dial number with
keypad.
2. Press phone’s
“send” key.
Using voice-activated
dialing (after you’ve
set up voice tags on
your phone)
1. Press and release
Multi-Function Button
once.
2. You’ll then hear the
voice-activation
tone; say the name
of the person you
wish to call.
Make a call
To Press and Hold
Ending a call
1. Press and release
Multi-Function Button
once
2.End call from
phone’s keypad
1. After you hear the
ring tone, press and
release Multi-Function
Button once
2. Answer the call
with your phone’s
keypad. You may
then need to transfer
the call to the
headset by long
pressing and
releasing the Multi-
Function Button for 2
seconds (depending
on your
phone).
Answering a call
BASIC OPERATIONS
Turning headset on/off
Meaning of the Indicator Light
* Depending on the Phone Type and usage, Actual time may vary.
To Press and Hold You Will Hear You Will See
Turn Headset On
the Multi-Function
Button for 4 seconds
until you see 3 Blue
flashes on the indicator
light, then release.
a Tone
the Indicator Light will
flash while the power is
on (see Meaning of the
Indicator Light Table).
Light Tone Status
Quick series of 2 Tones (When
Active model starts).
Flashes Blue once every
second.
The Headset is in Active
Mode
- The Headset has an Active
call in progress
- You can talk up to 8 hours*
5 Tones every 20 seconds.
Flashes in Red instead of
Blue.
The Headset battery is low
- There is only 3-5 minutes
of Talk time left.
Quick series of 2 Tones (When
Standby model starts).
3 consecutive short Blue
flashes.
The Headset is in Standby
Mode
- The Headset is waiting for
a call
- The Headset can be in
Standby mode for up to 150
hours*
Turn Headset Off
the Multi-Function
Button for 4 seconds
until you see 3 Red
flashes on the indicator
light, then release.
two Tones
the Indicator Light is off.
No Tone.2 consecutive short Blue
flashes.
The Headset is “on” but not
paired.
! IMPORTANT:
Do not hold the Multi-Function Button
down too long when making, ending,
or answering a call. This should only
be a quick push, so you don’t put the
headset into pairing mode by accident.
Enhanced features (for Bluetooth
phones with hands-free profiles)
Enhanced features are available for
phones that support the hands-free
speech dialing Bluetooth profile. Check
your phone’s instruction guide or contact
the phone manufacturer if you are not
sure if your phone supports the speech
dialing Bluetooth profile.
Once you’re done pairing, the following
headset features may be available:
WEARING THE HEADSET
Wear the headset on your ear. In general,
you will get better performance when
there are no obstructions (including
parts of your body) between the headset
and the phone. Depending on what
ear you are going to wear the headset,
simply unsnap and rotate the ear-hook
accordingly.
/
