www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
3
INTRODUCTION
PACKAGE CONTENTS:
FEATURES:
The Atlona AT-DVI4-100SR is a DVI with RS232 and Bi-Directional IR Extender Kit over Cat5/6/7. The
Atlona DVI Extenders are capable of extending extremely high resolutions up to 2K (2048x1080p) or
most known 1920x1200 and 1080p up to 330ft without signal degradation.
The DVI4-100SR is capable of transmitting Ethernet channel from one location to another, perfect for
digital signage applications.
• 1 x AT-DVI4-100S (transmitter module)
• 1 x AT-DVI4-100R (receiving module)
• 2 x 5v Power supplies (Universal 110/240V)
• 1 x Set of Wall Mounting Ears
• 2 x IR Emitter sensor
• 2 x IR Receiver sensor
• 1 x Instructions manual
• Transmits DVI (Digital Only), RS232 and Bi-Directional IR up to 330ft (100m)
• Supports Full Uncompressed HD Video
• Supports high resolution video HD: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz),
2k (2048x1080p)
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768,
1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200 and 2048x1080p
• Fully EDID Compliant
• Fully HDCP Compliant
• Supports all VESA formats which is perfect when used with specialized projectors or commercial
LCD panels.
• Enables 10.2Gbps of HDMI (including HDCP) over 330ft Cat5/6/7 cable.
• Supports Refresh Rates: 24Hz, 30Hz, 50, 60Hz
• Supports Bi-directional IR transmission, perfect for Control4, RTI, HAI users as this ability allows
sending IR to the remote locations from the control systems and from the remote locations to the
control systems.
• Supports RS232 pass-though, perfect for integrating a 3rd party control system.
• Supports transmission distances up to 330ft @ at full resolution
• Wall Mountable, mounting ears are included.
• Locking Power Supplies
• Easy to install, simple to operate and the most effective solution for long signal extension.
• Ideal for video broadcasting, remote monitoring, presentations and educational facilities.