SWITCH to ON and select the desired station/frequency and
the volume .
3 Then set the FUNCTION SWITCH to AUTO. The
activated alarm mode is then shown in the display.
4 Then set the FUNCTION SWITCH to RADIO. The
activated alarm mode is then shown in the display.
The appropriate alarm sounds when the alarm time is reached.
The alarm sound switches off automatically after 1 hour 59
minutes.
The alarm sound can be temporarily interrupted by pressing the
SNOOZE button . After approximately 9 minutes the alarm
sound automatically switches itself on again. This process can be
repeated for a maximum of 1 hour 59 minutes.
You can cut short the alarm period by setting the FUNCTION
SWITCH to OFF.
After the alarm is switched off, if you set the FUNCTION
SWITCH to AUTO again the alarm will sound on the next day
at the same time.
This setting allows you to go to sleep whilst listening to the radio.
With the FUNCTION SWITCH in the AUTO or OFF position
the radio plays for a maximum of 1 hour 59 minutes.
1 Press the Sleep button to set the time for which the radio
will play. The display shows .
2 If you wish the radio to stop playing earlier just press and
hold down the Sleep button whilst pressing the
MINUTES button until the desired playing time is
displayed.
0:59
14
Automatic
24 hour alarm
Going to
sleep with the
sleep function
Gb
Manual_alle Sprachen 20.10.2003 15:01 Uhr Seite 14