2322
Digital alarm clock with USB charging function
7.2 Time setting
• Slide the SET/LOCK switch to the left. The time digits flash.
• Turn the SNOOZE/LIGHT dial and set the actual time.
• After setting slide the SET/LOCK switch to the position LOCK (normal mode).
7.3 24- or 12-hour system settin
• Press the 12H/24H button in normal mode to choose between the 12- or 24-hour system.
• In the 12-HR system AM (before noon) or PM (after noon) appears on the display.
7.4 Temperature unit setting
• Press the °C/°F button in normal mode to change between °C (Celsius) or °F (Fahrenheit) as temperature units.
7.5 Alarm ALARM setting
• Press the ALARM button in normal mode.
• The alarm symbol and 00:00 (default), or the last adjusted alarm time, appear and flash on the display.
• Turn the SNOOZE/LIGHT dial and set the alarm time while the indication flashes.
• Press the SNOOZE/LIGHT dial or wait 5 seconds to confirm the setting.
• The alarm symbol and the alarm time stop flashing. The alarm function is activated.
• When the alarm time is reached, a melody will sound and increase gradually in volume.
Digital alarm clock with USB charging function
• Press the SNOOZE/LIGHT dial for 3 seconds and the alarm will stop.
• Press briefly the SNOOZE/LIGHT dial to activate the snooze function.
• Once the snooze function is activated, the alarm symbol flashes and appears on the display.
• The alarm will be interrupted for 9 minutes.
• Press the ALARM button to turn off the alarm function.
• The alarm symbol and the alarm time disappear.
7.6 Charging function
• Attention: The charging function only works with the power adapter.
• Plug the USB cable (not included) into one of the two USB ports on the alarm clock and connect the other end to your
mobile device. Make sure that the USB charging function is suitable for your mobile device (charging current 2A).
• The corresponding charging symbol is displayed shortly after a successful connection and the charging function starts.
• When the mobile device is fully charged, the charge icon will appear filled and disappears after a few seconds.
7.7 Volume
• The alarm volume can be adjusted continuously to the desired level with the volume control wheel.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
TFA_No. 60.2017_anl_02_17 15.02.2017 16:33 Uhr Seite 12