Craftsman 247774661 Owner's manual

Category
Log splitters
Type
Owner's manual

This manual is also suitable for

Operator's Manual
I:RRFTSMRN°
6.5 Horse Power
LOG SPLITTER
Model No. 247.77466.1
CAUTION: Before using
this product, read this
manual and follow all
safety rules and operating
instructions.
SAFETY
ASSEMBLY
OPERATION
MAINTENANCE
PARTS LIST
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Visit our web site: www, sears,corn/craftsrnan FORMNO.769-00851E
08/15/2006
Warranty Statement .................................. Page 2
Repair Protection Agreement ................... Page 3
Safe Operation Practices ......................... Pages 4-5
Assembly .................................................. Pages 6-7
Operation .................................................. Pages 8-11
Service & Adjustments ............................. Pages 12-13
Maintenance ............................................. Pages 14-16
Off Season Storage .................................. Page 17
Trouble Shooting ...................................... Page 18-19
Parts List ................................................... Page 20-27
Espa_ol ..................................................... Page 29
Service Numbers ...................................... Back Cover
Limited Warranty on Craftsman Log Splitter
Forone (1)yearfromthedateof purchase,ifthis CraftsmanEquipmentismaintained,lubricated,andtunedupaccordingtotheinstructionsto
theoperator'smanual,Searswillrepairor replacefreeofchargeanypartsfoundtobe defectiveinmaterialorworkmanship.Warrantyserviceis
availablefreeofchargebyreturningCraftsmanequipmenttoyournearestSearsServiceCenter.In-homewarrantyserviceisavailablebutatrip
chargewillapply.ThisWarrantyappliesonlywhilethisproductisintheUnitedStates.
This warranty does not cover:
Expendableitemswhichbecomewornduringnormaluse,suchassparkplugs,aircleaners,belts,andoilfilters.
Tirereplacementor repaircausedbypuncturesfromoutsideobjects,suchasnails,thorns,stumps,or glass.
Repairsnecessarybecauseof operatorabuse,includingbutnotlimitedto,damagecausedbyobjects,suchasstonesor metaldebris,
oversizedstock,impactingobjectsthatbendtheframeorcrankshaft,orover-speedingtheengine.
Repairsnecessarybecauseof operatornegligence,includingbutnotlimitedto,electricaland mechanicaldamagecausedbyimproper
storage,failureto usethepropergradeand amountofengineoil,orfailuretomaintaintheequipmentaccordingtotheinstructionscontained
in theoperator'smanual.
Engine(fuelsystem)cleaningor repairscausedbyfueldeterminetobecontaminatedoroxidized(stale).Ingeneral,fuelshouldbeused
within30 daysof itspurchasedate.
Equipmentusedforcommercialor rentalpurposes.
WARRANTYSERVICEISAVAILABLEBYRETURNINGTHECRAFTSMANSNOWTHROWERTOTHE NEAREST
SEARSPARTS& REPAIRCENTERINTHEUNITEDSTATES.
This warrantyappliesonlywhilethisproductisin useintheUnitedStates.
TOLOCATETHENEARESTSEARSPARTS& REPAIRCENTERORTOSCHEDULESERVICE,
SIMPLYCONTACTSEARSAT1-800-4-MY-HOME®.
Thiswarrantygivesyouspecificlegalrightsandyoumayalsohaveotherrightswhichmayvaryfromstatetostate.
SEARS,ROEBUCKANDCO.,D/817WA,HOFFMANESTATES,IL 60179
Horse Power: 6.5
Engine Oil: SAE 30
Engine Oil Capacity: 20 Ounces
Fuel Capacity: 1.5 Quarts
Spark Plug 0030" Gap):Champion® RJ19LM
Hydraulic Fluid/Capacity:Dexron ill/3.0 gal.
Model Number .............................................................
Serial Number ..............................................................
Date of Purchase ..........................................................
Record the model number, serial number
and date of purchase above
Congratulationson makingasmartpurchase.YournewCraftsman®
productisdesignedandmanufacturedforyearsofdependableopera-
tion.Butlikeall products,it mayrequirerepairfromtimetotime.That's
whenhavinga RepairProtectionAgreementcansaveyoumoneyand
aggravation.
Here'swhat'sincludedintheAgreement:
,, Expertservicebyour 12,000professionalrepairspecialists
,, Unlimitedserviceand nochargefor partsandlaboronallcovered
repairs
,, Productreplacementifyourcoveredproductcan'tbe fixed
,, Discountof 10%fromregularpriceofserviceandservice-related
partsnotcoveredbytheagreement;also,10%off regularpriceof
preventivemaintenancecheck
,, Fasthelpbyphone- phonesupportfromaSearstechnicianon
productsrequiringin-homerepair,plusconvenientrepair
scheduling
Purchasea RepairProtectionAgreementnowandprotectyourself
fromunexpectedhassleandexpense.
OnceyoupurchasetheAgreement,a simplephonecallisall thatit
takesforyoutoscheduleservice.Youcancallanytimedayornight,or
schedulea serviceappointmentonline.
Searshasover12,000professionalrepairspecialists,whohave
accesstoover4.5millionqualitypartsandaccessories.That'sthe
kindofprofessionalismyoucancounton tohelpprolongthelifeof
yournewpurchaseforyearstocome.PurchaseyourRepairProtection
Agreementtoday!
Somelimitationsand exclusionsapply. Forpricesand additional
informationcall 1-800-827-6655.
SearsInstallation Service
ForSearsprofessionalinstallationof homeappliances,garagedoor
openers,waterheaters,andothermajorhomeitems,in theU.S.A.call
1-800-4-MY-HOME®
l_lk ARNING: This symbol pointsout importantsafety instructionswhich, ifnotfollowed, couldendangerthe
personalsafety and/or propertyof yourselfand others. Readand followall instructionsinthis manualbefore
attemptingto operatethis machine. Failureto comply with these instructionsmayresult inpersonalinjury.
Whenyou seethis symbol- heed itswarning.
__i ARNING: EngineExhaust,some of itsconstituents,and certain vehiclecomponentscontain or emit
chemicalsknownto State of Californiato cause cancer and birth defectsor other reproductiveharm.
DANGER: This machinewas builtto beoperatedaccording to the rulesfor safeoperationin this manual.
As withanytype of powerequipment, carelessnessor erroron the part of theoperatorcan resultin
seriousinjury.This machine is capableof amputatinghandsand feet and throwingobjects. Failureto
observe the followingsafety instructionscould resultin seriousinjury or death.
General Practices
1. Read,understand,andfollowall instructionson themachineand
in themanual(s)beforeattemptingtoassembleandoperate.Keep
thismanualina safeplaceforfutureandregularreferenceandfor
orderingreplacementparts.
2. Befamiliarwithall controlsandproperoperation.Knowhowto stop
themachineanddisengagethemquickly.
3. Neverallowchildrenunder16yearstooperatethis machine.
Children,16yearsandover,shouldreadandunderstandinstruc-
tionsandsafetyrulesinthismanualandshouldbe trainedand
supervisedbya parent.
4. Neverallowadultstooperatethis machinewithoutproperinstruc-
tion.
5. Manyaccidentsoccurwhenmorethanonepersonoperatesthe
machine.If ahelperisassistinginloadinglogs,neveractivatethe
controluntilthehelperisa minimumof 10feetfromthemachine.
6. Keepbystanders,helpers,pets,andchildrenat least20 feetfrom
themachinewhileit isin operation.
7. Neverallowanyonetorideon thismachine.
8. Nevertransportcargoonthis machine.
9. Hydrauliclogsplittersdevelophighfluidpressuresduringopera-
tion.Fluidescapingthroughapin holeopeningcanpenetrateyour
skinandcausebloodpoisoning,gangrene,or death.Giveattention
tothefollowinginstructionsatall times:
a. Donotcheckforleakswithyourhand.
b. Donotoperatemachinewithfrayed,kinked,cracked,ordamaged
hoses,fitting,ortubing.
c. Stoptheengineandrelievehydraulicsystempressurebeforechanging
oradjustingfittings,hoses,tubing,orothersystemcomponents.
d. Donotadjustthepressuresettingsofthepumporvalve.
10.Leakscanbedetectedbypassingcardboardor wood,while
wearingprotectiveglovesandsafetyglasses,overthesuspected
area.Lookfordiscolorationofcardboardorwood.
11.If injuredbyescapingfluid,seea doctorimmediately.Serious
infectionor reactioncandevelopif propermedicaltreatmentisnot
administeredimmediately.
12.Keeptheoperatorzoneandadjacentareaclearforsafe,secure
footing.
13.If yourmachineisequippedwithaninternalcombustionengine
and itisintendedforusenearanyunimprovedforest,brush,or
grasscoveredland,theengineexhaustshouldbeequippedwitha
sparkarrester.Makesureyoucomplywithapplicablelocal,state,
andfederalcodes.Takeappropriatefirefightingequipmentwith
you.
14.Thismachineshouldbeusedforsplittingwoodonly,do notuseit
foranyotherpurpose.
15.Followthe instructionsinthemanual(s)providedwithany
attachment(s)forthismachine.
Preparation
1. Alwayswearsafetyshoesor heavyboots.
2. Alwayswearsafetyglassesor safetygogglesduringoperatingthis
machine.
3. Neverwearjewelryor looseclothingthatmightbecomeentangled
in movingor rotatingpartsofthemachine.
4. Makesuremachineisonlevelsurfacebeforeoperating.
5. Alwaysblockmachinetopreventunintendedmovement,and lock
in eitherhorizontalor verticalposition.
6. Alwaysoperatethismachinefromtheoperatorzone(s)specifiedin
themanual.
7. Logsshouldbe cutwithsquareendspriortosplitting.
8. Uselogsplitterindaylightor undergoodartificiallight.
9. Toavoidpersonalinjuryor propertydamageuseextremecarein
handlinggasoline.Gasolineisextremelyflammableandthevapors
areexplosive.Seriouspersonalinjurycanoccurwhengasolineis
spilledon yourselfor yourclotheswhichcanignite.Washyourskin
andchangeimmediately.
a. Useonlyanapprovedgasolinecontainer.
b. Extinguishallcigarettes,cigars,pipes,andothersourcesofignition.
c. Neverfuelmachineindoors.
d. Neverremovegascaporaddfuelwhiletheengineishotorrunning.
e. Allowenginetocoolatleasttwominutesbeforerefueling.
4
f. Neveroverfillthefueltank.Filltanktonomorethan1/2inchbelow
bottomoffillernecktoprovidespaceforfuelexpansion.
g. Replacegasolinecapandtightensecurely.
h. Ifgasolineisspilled,wipeitofftheengineandequipment,move
machinetoanotherarea.Wait5minutesbeforestartingtheengine.
i. Neverstorethemachineorfuelcontainerinsidewherethereisanopen
flame,sparkorpilotlightasonawaterheater,spaceheater,furnace,
clothesdryerorothergasappliances.
j. Allowmachinetocool5 minutesbeforestoring.
Operation
1. Beforestartingthis machine,reviewthe"SafetyInstructions".
Failuretofollowtheserulesmayresultinseriousinjurytothe
operatororbystanders.
2. Neverleavethismachineunattendedwiththeenginerunning.
3. Donotoperatemachinewhileundertheinfluenceofalcohol,drugs,
or medication.
4. Neverallowanyonetooperatethis machinewithoutproperinstruc-
tion.
5. Alwaysoperatethismachinewithallsafetyequipmentinplace
andworking.Makesureall controlsare properlyadjustedforsafe
operation.
6. Donotchangetheenginegovernorsettingsoroverspeedthe
engine.Thegovernorcontrolsthemaximumsafeoperatingspeed
oftheengine.
7. Whenloadinga log,alwaysplaceyourhandson thesidesofthe
log,noton theends,andneveruseyourfootto helpstabilizea log.
Failuretodo so,mayresultin crushedoramputatedfingers,toes,
hand,orfoot.
8. Useonlyyourhandtooperatethecontrols.
9. Neverattempttosplitmorethanone logata timeunlesstheram
hasfullyextendedanda secondlogis neededtocompletethe
separationofthefirst log.
10.Forlogswhichare notcut square,theleastsquareendandthe
longestportionofthelogshouldbeplacedtowardthebeamand
wedge,andthesquareendplacedtowardtheend plate.
11.Whensplittingintheverticalposition,stabilizethelogbefore
movingthecontrol.Splitasfollows:
a. Placelogontheendplateandturnuntilitleansagainstthebeamand
isstable.
b. Whensplittingextralargeorunevenlogs,thelogmustbestabilized
withwoodenshimsorsplitwoodbetweenthelogandendplateor
ground.
12.Alwayskeepfingersawayfromanycracksthat openinthelog
whilesplitting.Theycanquicklycloseand pinchoramputateyour
fingers.
13.Keepyourworkareaclean.Immediatelyremovesplitwoodaround
themachinesoyoudonotstumbleoverit.
14.Nevermovethismachinewhiletheengineisrunning.
15.Thismachineshouldnotbetowedonanystreet,highwayor public
roadwithoutcheckingtheexistingfederal,state,or localvehicle
requirements.Anylicensingor modificationssuchastaillights,etc.,
neededtocomply,isthesoleresponsibilityofthepurchaser.If a
"StatementofOrigin"isrequiredin yourstate,seeyourlocaldealer.
16.Donottowmachinefasterthan45mph.
17.SeeTransportingtheLogSplittersectioninthismanualfor proper
towinginstructionsonceallfederal,local,or staterequirementsare
met.
Maintenance and Storage
1. Stoptheengine,disconnectthespark plugandgrounditagainst
theenginebeforecleaning,or inspectingthemachine.
2. Stoptheengineandrelievehydraulicsystempressurebefore
repairingoradjustingfittings,hoses,tubing,or othersystem
components.
3. Topreventfires,cleandebrisandchafffromtheengineandmuffler
areas.Iftheengineisequippedwitha sparkarrestermuffler,clean
and inspectit regularlyaccordingtomanufacturersinstructions.
Replaceifdamaged.
4. Periodicallycheckthatall nutsandbolts,hoseclamps,and
hydraulicfittingsaretighttobe sureequipmentisin safeworking
condition.
5. Checkall safetyguardsandshieldstobesuretheyare inthe
properposition.Neveroperatewithsafetyguards,shields,orother
protectivefeaturesremoved.
6. Thepressurereliefvalveispresetatthefactory.Donotadjustthe
valve.
7. Neverattempttomovethis machineoverhillyor uneventerrain
withouta towvehicleoradequatehelp.
8. Foryoursafety,replacealldamagedorwornpartsimmediately
withoriginalequipmentmanufacturer's(O.E.M.)partsonly."Useof
partswhichdo notmeettheoriginalequipmentspecificationsmay
leadtoimproperperformanceandcompromisesafety!"
9. Donotalterthis machinein anymanner,alterationssuchasattach-
inga ropeor extensiontothecontrolhandle,oraddingtothewidth
or heightofthewedgemayresultinpersonalinjury.
Your Responsibility
Restricttheuseofthis powermachinetopersonswhoread,under-
standandfollowthewarningsand instructionsin thismanualandon
themachine.Alwaysfollowdirectionson safetylabelsfoundonyour
equipment.
Figure 3-1
IMPORTANT:Yourlogsplitterisshippedwith motoroil in theengine.
However,youMUSTchecktheoil levelbeforeoperating.Becareful
nottooverfill.
NOTE:All referencesinthis manualtotheleftor rightsideofthelog
splitteris fromtheoperatingpositiononly.
Removing Unit From Carton
1. Prythetop,sides,andendsoff crate.
2. Setpanelsasidetoavoidtirepuncturesor personalinjury.
3. Removeanddiscardplasticbagthatcoversunit.
4. Removeanyloosepartsifincludedwithunit(i.e.,operator's
manual,etc.)
5. Cutand removestrapswhichsecurepartstobottomofcrate.
Unboltanyremainingpartswhichmaybeboltedtothebottomof
J thecrate.
f
f
f
\\
\
Figure 3-2
Figure 3-3
,_ WARNING:Useextremecautionunpacking this
machine.Somecomponentsare very heavy and will
require additional peopleor mechanicalhandling
equipment.
Loose Parts In Carton
1. TongueAssembly
_ ARNING:Disconnectthe spark plugwireand
groundagainst the engineto preventunintended
starting.
Assembling the Tongue
Attaching the Jack Stand
j Thejackstandisshippedin thetransportposition.
1. Removethespringclipandclevispinandpivotthejackstand
towardsthegroundtotheoperatingposition.
2. Securethejack standinpositionwiththeclevispinandspringclip.
SeeFigure3-1.
J
Attaching the Tongue
1. Withthelogsplitterstillstandingupright,removetwo hexboltsand
hexnutsfromthetankbracket.SeeFigure3-2.
2. Aligntheholesin thetonguewiththeholesin thetank bracketand
securewith hardwarejustremoved.SeeFigure3-2.
NOTE:Highpressurehosemustbe abovethetongueassembly.
Connecting Cylinder to Beam
Thelogsplitterisshippedwiththebeamintheverticalposition.
1. Pullouttheverticalbeamlock,rotateit back,andpivotthebeamto
thehorizontalpositionuntilitlocks.SeeFigure3-3.
6
2. Disconnectthedislodgerfromthebeamweldbracketbyremoving
thesixhexscrews.SeeFigure3-4.
3. Disconnectthelogcradlefromthebeamonthesideofthecontrol
valve.SeeFigure3-5.
4. Liftandslidethecylinderuptothetopofbeamand intotheweld
brackets.
5. Attachthedislodgeroverthewedgeassemblyandsecurewith
hardware,previouslyremoved,totheweldbrackets.
NOTE:Oncethesixhexscrewsaretightened,theremaybea slight
gapbetweenthedislodgerandtheweldbrackets.Thisgapis normal.
6. Reattachthelogcradletothesideofthebeamwiththecontrol
valve,aligningtheendsofthecradlewiththebeamflanges.
7. Rolllogsplitteroffthebottomcrate.
Preparing the Log Splitter
1. Lubricatethebeamarea(wherethesplittingwedgewillslide)with
engineoil;do notusegrease.
2. Removeventedreservoirdipstick,whichislocatedin frontofthe
engineontopofthereservoirtank.SeeFigure3-6.
IMPORTANT:Thelogsplittermayhavebeenshippedand primed
withhydraulicfluidinthereservoirtank. However,youMUSTcheck
thefluidlevelbeforeoperating.If not filled, proceedwiththefollowing
steps:
3. Fillthe reservoirtankwithhydraulicfluidincludedwiththisunit(if
equipped)or approvedfluidswhichincludeDexron®III/ Mercon®
Ill automatictransmissionfluid,a 10WeightAWhydraulicoil or
Pro-MixTM AW-32HydraulicOil.
4. Checkfluidlevelusingthedipstick.SeeFigure3-6.Donotoverfill.
5. Replaceventeddipsticksecurely,tighteningituntilthetopofthe
threadsare flushwithtopofthepipe.
6. Disconnectthesparkplugand primethepumpbypullingtherecoil
starterasfaras itwillgo.Repeatapproximately10times.
7. Reconnectthesparkplugwireandstartenginefollowinginstruc-
tionsintheOPERATIONsection.
8. Usecontrolhandletoengagethewedgeto thefarthestextended
position.Thenretractthewedge.
9. Refilltankasspecifiedon thedipstick.
NOTE:Failuretorefillthetankwillvoidunit'swarranty.
10.Extendandretractthewedge12completecyclesto remove
trappedair inthesystem(thesystemis "self-bleeding").
11.Refillreservoirwithinrangemarkedon thedipstick.
_ ARNING:Much of the original fluid hasbeen
drawnintothe cylinderandhoses.Makecertain
to refillthe reservoirto preventdamageto the
hydraulicpump.
NOTE:Somefluidmayoverflowfromtheventplugasthesystem
buildsheatandthefluidexpandsandseeksa balancedlevel.
f --,,
,.. j
Figure 3-4
f
f
, _ jlJ _
Figure 3-6
J
7
f
linder
3ontrol Handle
ie
BeamAssembly
Tongue
Jack Stand
Vertical Log Cradle
Beam
Lock
jjl
if ....
Horizontal Beam Lock
Figure 4-1
WARNING:Readthis operator's manualandsafety
rulesbeforeoperatingyour log splitter.Compare
the illustrationsbelow with yourequipmentto
familiarize yourself withthe location of various
controlsand adjustments. Savethis manualfor
future reference.
Theoperation of anylog splitter canresult in
foreign objects beingthrown intothe eyes,which
canresult insevereeyedamage.Alwayswearsafety
glasses, for operating this equipmentor while
performingany adjustmentsor repairsonit.
TailLight
(If Equipped)
Vertical BeamLock
_ WARNING:Befamiliar with all controlsandtheir
properoperation.Know howto stop the machine
anddisengage them quickly.
J
Beam Locks
Thesetwo locks,astheirnamesuggests,are usedto securethebeam
inthehorizontalortheverticalposition.Theverticalbeamlockis
locatednexttotheoil filter.Thehorizontalbeamlockislocatedon the
beamsupportlatchbracket.SeeFigure4-1.
Meets ANSi Safety Standards
CraftsmanYardVacuumsconformtothesafetystandardof theAmericanNationalStandardsInstitute(ANSI).
8
Engine Controls
Stop Switch
PushbuttontoONpriortochokingforenginestart; pushtoOFFto
shutenginedown.
Choke Control
Thechokecontrolisusedtochokeoffthecarburetorandassistin
startingtheengine.
Starter Handle
Thestarterhandleislocatedontheengine.Pullthestarterhandleto
startengine.
Control Handle
Thecontrolhandlehasthreepositions.SeeFigure4-2.
,, FORWARD:MovecontrolhandleFORWARDor DOWNto move
wedgeto splitwood.
NOTE:Controlhandlewillreturnto neutralpositionassoonas handle
isreleased.(ForwardPosition only)
f --,,
_ T_osplit wood
Figure 4=2
J
o
o
NEUTRAL:Releasethecontrolhandleor movetheleverto neutral
positiontostopthewedgemovement.
REVERSE:MovecontrolhandleBACKor UPtoreturnthe
wedgetowardthecylinder.Thecontrolhandlestaysin thereturn
(Reverse)positionandreturnsto neutralautomaticallywhenfully
retracted.
NOTE:Reversepositionmayalsobe operatedbackto neutralposition
manually,if necessary.
Gas and Oil Fill-Up
IMPORTANT:Yourlogsplittermaybeshippedwithmotoroil inthe
engine.YouMUSTchecktheoil levelbeforeoperating.Becarefulnot
tooverfill.
_ WARNING:Useextremecarewhen handling
gasoline.Gasolineisextremelyflammableand the
vaporsareexplosive.Neverfuel machine indoorsor
whilethe engineishotor running.
Oil
1. Removeoilfilldipstick.
2. Checktheoil levelmakingcertainnottorubthedipstickalongthe
insidewallsoftheoil filltube.Thiswouldresultin afalsedipstick
reading.RefilltoFULLmarkondipstick,ifnecessary.Replace
dipstickandtighten.
3. If necessary,withthelogsplitteronlevelground,usea funneltofill
enginewithoil toFULLmarkondipstick.Becarefulnottooverfill.
Overfillingwillcausetheenginetosmokeprofuselyandwill result
in poorengineperformance.
4. Checkoil levelthreetimespriortostartingenginetobecertain
you'vegottenanaccuratedipstickreading.Runningtheenginewith
toolittleoil canresultin permanentenginedamage.
Gasoline
1. Removefuelcapfromthefueltank.
2. Makesurethecontainerfromwhichyouwillpourthegasolineis
cleanandfreefromrustorforeignparticles.Neverusegasoline
that maybestalefromlongperiodsof storagein itscontainer.
Gasolinethat hasbeensittingforanyperiodlongerthanfourweeks
shouldbeconsideredstale.
3. Fillfueltankwithabout1.5quartsof clean,fresh,lead-freegrade
automotivegasoline.DONOTuseEthlyorhighoctanegasoline.
NOTE:Gasolinecanbeaddedto theenginewhenthe logsplitteris
ineitherthehorizontalorverticalposition.However,thereareless
obstructionswhenthe unitisin theverticalposition.
NOTE:Donotusegasolinecontainingmethanol.Gasolinecontaining
uptoabout10%ethanolor upto 15%methyltertiarybutylether
(MTBE)maybe used,butwillrequirespecialcarewhenengineis left
unusedforextendedperiod.
4. Replacefuelcap.
NOTE:Toavoidengineproblems,thefuelsystemshouldbe emptied
beforestoragefor30 daysorlonger.Drainthegastank,startthe
engineand letitrununtilthefuellinesandcarburetorareempty.Use
freshfuelnextseason.SeeSTORAGEsectionforadditionalinforma-
tion.
9
Figure 4-3
Stopping Engine
1. PushstopswitchtoOFF.
2. Disconnectsparkplugwireandgroundagainsttheengineto
preventunintendedstarting.
Starting Engine
1. Attachsparkplugwireto sparkplug.Makecertainthemetalcapon
theendofthesparkplugisfastenedsecurelyoverthemetaltipon
thesparkplug.
2. PushstopswitchtoON.
3. Movechokecontrolto CHOKEposition.
4. Graspstarterhandleandpullropeoutslowlyuntilenginereaches
startof compressioncycle(ropewillpullslightlyharderat this
point).
5. Pullropewitha rapid,continuous,fullarmstroke.Keepafirmgrip
onstarterhandle.Letroperewindslowly.
6. Repeat,if necessary,untilenginestarts.Slowlyadjustchoke
towardRUNposition.Waituntilenginerunssmoothlybeforeeach
chokeadjustment.
7. If enginefalters,movecontrollevertoCHOKEposition,thenslowly
backto RUNposition.
8. If weatheris cold,run wedgeup ordownbeam6 to8timesto
circulatethehydraulicfluid.
_ WARNING:Whenstartinga warm engine,the muf-
fler and surroundingareasarehot and cancausea
burn.Donot touch.
Using the Log Splitter
1. Placethelogsplitteron level,dryground.
2. Placethebeamineitherthe horizontalor verticalpositionandlock
in placewiththeappropriatelockingrod.
3. Blockthefrontand backof bothwheels.
4. Placethelogagainsttheendplateandonlysplitwoodinthe
directionofthegrain.
5. Tostabilizethelog,placeyourhandonlyon sidesof log.Never
placehandon the endbetweenthe logand the splitting
wedge.
6. Onlyoneadultshouldstabilizethelogandoperatethecontrol
handle,sotheoperatorhasfullcontroloverthelogandthesplitting
wedge.
Control Handle
1. MovecontrolhandleFORWARDor DOWNtosplitwood.
2. Releasethecontrolhandletostopthewedgemovement.
3. MovecontrolhandleBACKor UPtoreturnthewedge.
Log Dislodger
Thelogdislodgerisdesignedto removeanypartiallysplitwoodfrom
thewedge.Thismayoccurwhilesplittinglargediameterwoodor
freshlycutwood.
_ ARNING:Neverremove partiallysplit wood from
the wedgewithyour hands.Fingersmay become
trapped betweensplit wood.
1. Toremovepartiallysplitwoodfromwedge,movecontrolhandleto
REVERSEpositionuntilwedgeisfullyretractedtoallowsplitwood
portiontocontactthe logdislodger.
2. Onceremovedfromwedgewithlogdislodger,splitwoodfrom
oppositeendor inanotherlocation.
Vertical Position
1. Pullthehorizontalbeamlockouttoreleasethebeamandpivotthe
beamtotheverticalposition.
2. Tolockthebeamintheverticalposition,pulloutonthevertical
beamlockand rotateittosecurethebeam.SeeFigure4-1.
3. Standin frontoftheunittooperatethecontrolhandleandto
stabilizethe log.SeeFigure4-3.
10
Horizontal Position
1. Pulltheverticalbeamlockoutandrotateitdown.SeeFigure4-1.
Pivotbeamtothehorizontalposition.Thebeamwilllockautomati-
callyin horizontalposition.
2. Standbehindthereservoirtanktooperatecontrolhandleandto
stabilizethelog.
Operating Tips
Always:
1. Usecleanfluidandcheekfluidlevelregularly.
2. Useanapprovedhydraulicfluid.ApprovedfluidsincludeDexron®
III/Mercon® IIIautomatictransmissionfluid,a 10WeightAW
hydraulicoil orPro-MixTM AW-32HydraulicOil.
3. Useafilter (cleanor replaceregularly).
4. Useabreathercapon fluidreservoir.
5. Makesurepumpismountedandalignedproperly.
6. Useaflexible"spider"typecouplingbetweenengineand pump
driveshafts.
7. Keephosesclearandunblocked.
8. Bleedair outof hosesbeforeoperating.
9. Flushandcleanhydraulicsystembeforerestartingafterservicing.
10.Use"pipedope"on allhydraulicfittings.
11.Allowtimeforwarm-upbeforesplittingwood.
12.Primethe pumpbeforeinitialstart-upbyturningovertheengine
withsparkplugdisconnected.
13.Splitwoodalongthegrain(lengthwise)only.
Never:
1. Usewhenfluidisbelow20°For above150° R
2. Useasolidengine/pumpcoupling.
3. Operatethroughreliefvalveforlong.
4. Attempttoadjustunloadingor reliefvalvesettingswithoutpressure
gauges.
5. Operatewithair inhydraulicsystem.
6. Useteflontapeonhydraulicfittings.
7. Attempttocutwoodacrossthegrain.
8. Attempttoremovepartiallysplitwoodfromthewedgewithyour
hands.Fullyretractwedgetodislodgewoodwith logdislodger.
f
Figure 4-4
Transporting the Log Splitter
IMPORTANT:AlwaysturnfuelvalvetoOFFpositionbeforetransport-
ingthelogsplitter.
1. Lowerthebeamto its horizontalposition.Makecertainthebeamis
lockedsecurelywith thehorizontalbeamlock.
2. Removespringclipandclevispinfromjackstand.
3. Supportthetongueand pivotthejackstandupagainstthetongue.
SeeFigure4-4.
4. Securewiththespringclipandclevispinpreviouslyremoved.See
Figure4-4.
5. Attachcouplerhitchtoa classIor higher2" ballona towing
vehicle;latchsecurely.
a. If coupler hitch does not fit on ball:Turnadjustmentnutone
turncounter-clockwise.
b.If coupler hitch is too looseon ball: Turnadjustmentnutone
turnclockwise.
6. Connectthesafetychainstothetowingvehicle.
7. Plugin thetaillights,ifsoequipped,to thetail lightconnectoron
thetowvehicle.
_ WARNING:Donot tow faster than 45mphand check
local, state, and federal requirements before towing
onany publicroad.
NOTE:Usecautionwhenbackingup.It isrecommendedtousea
spotteroutsidethevehicle.
11
f
Adjustment
Bolt
-Gib
Jam Nut
Lock Nut
Figure 5-1
_ WARNING:Do not atanytime makeanyadjust-
ments without first stopping engine,disconnecting
spark plugwire,and groundingitagainstthe
engine.Alwayswearsafety glassesduring opera-
tion or whileperformingany adjustments or repairs.
Wedge Assembly Adjustment
Asnormalwearoccursandthereisexcessive"play"betweenthe
wedgeand beam,adjusttheboltsonthesideofthewedgeassembly
toeliminateexcessspacebetweenthewedgeandthe beam.
1. Loosenthejamnutson thetwoadjustmentboltsonthesideofthe
wedge.SeeFigure5-1.
2. Turntheadjustmentboltsin untilsnugandthenbackthemoff
slowly(approximately1.5turns)untilthewedgeassemblywillslide
onthebeam.
3. Re-tightenthejamnutssecurelyagainstthesideofthewedgeto
securetheadjustmentbolts inthisposition.
Gib Adjustment
Periodicallyremoveand replacethe"gibs"(spacers)betweenthe
wedgeassemblyandthebackplate.
NOTE:Thegibsmaybe rotatedand/orturnedoverforevenwear.
1. Loosenthelocknutsundereachbackplateandslidethegibsout.
SeeFigure5-1.
2. Turnor replacethegibs.
3. Reassemblethebackplateandsecurewiththelock nuts.
4. Readjusttheboltsonthesideofthewedgeassembly.
Hose Clamps
Check,beforeeachuse,if hoseclampson thesuctionhose
(attachedto thesideofthepump)aretight.Checkthehoseclamps
on thereturnhoseatleastonceaseason.
Flexible Pump Coupler
Theflexiblepumpcouplerisa nylon"spider"insert,locatedbetween
thepumpandtheengineshaft.Overtime,thecouplerwillhardenand
deteriorate.
Replacethecouplerif youdetectvibrationor noisecomingfromthe
areabetweentheengineand thepump.Ifthecouplerfailscompletely,
youwillexperiencea lossofpower.
IMPORTANT:Neverhittheengineshaftinanymanner,asa blowwill
causepermanentdamagetotheengine.
12
1. Removethreenutsthatsecurethepumpto thecouplingshield.
Twonutsareatthebottomcornersand oneisinthetopcenter.
SeeFigure5-2.
2. Removethepump.
3. Rotatetheenginebyslowlypullingstarterhandleuntilengine
couplinghalfsetscrewisvisible.Loosensetscrewusingallen
wrenchandslidecouplinghalfoff engineshaft.
4. Loosensetscrewon pumpcouplinghalfand removecouplinghalf.
5. Slidenewenginecouplinghalfontotheengineshaftuntiltheend of
theshaftisflushwiththeinnerportionofthecouplinghalf.(There
mustbespacebetweentheendoftheenginesupportbracketand
couplinghalf).Tightensetscrew.
6. Installpumpcouplinghalfand keyonpumpshaft.Rotatecoupling
halfuntilsetscrewfacesopeninginshield.Donottightenset
screw.
7. Installnylon"spider"ontoenginecouplinghalf.
8. Alignpumpcouplinghalfwith nylon"spider"byrotatingengine
usingstarterhandle.Slidecouplinghalfintoplacewhileguiding
threemountingboltsthroughholesinpumpsupportbracket.
9. Securewith nutsremovedearlier.
10.Set.010"to.060"clearance/gapbetweenthenylon"spider"and
theenginecouplinghalfbyslidinga feelergaugeor matchbook
coverbetweenthenylon"spider"andtheenginecouplinghalfand
movingpumpcouplinghalfas needed.Securepumpcouplinghalf
withsetscrew.SeeFigure5-2.
NOTE:Makecertainproperclearance/gapisobtainedbeforetighten-
ingsetscrew.
/
Screw
Side View-Coupler
; 0000
_.OJO0
_,, ,J
Figure 5-2
Tires
Seesidewalloftireforrecommendedpressure.Underanycircum-
stancesdo notexceedmanufacturer'srecommendedpsi. Maintain
equalpressureon alltires.
_ ARNING:Excessivepressurewhen seatingbeads
maycausetire/rim assembly to burstwithforce
sufficientto causeseriousinjury.Referto sidewall
of tire for recommendedpressure.
13
Maintenance Schedule
TASKS
Figure 5-1
_ ARNING:Do not atanytime makeanyadjust-
ments without first stopping engine,disconnecting
spark plug wire,and grounding itagainst the
engine.Alwayswearsafety glassesduring opera-
tion or while performingany adjustments or repairs.
General Recommendations
1.
2.
3,
4,
5.
SERVICEDATES
Alwaysobservesafetyruleswhenperforminganymaintenance.
Thewarrantyonthis logsplitterdoesnotcoveritemsthathave
beensubjectedtooperatorabuseor negligence.Toreceivefull
valuefromthewarranty,operatormustmaintaintheequipmentas
instructedinthis manual.
Someadjustmentswillneedtobemadeperiodicallytomaintain
yourequipmentproperly.
Followthe maintenanceschedule(Figure5-1).
Periodicallycheckall fastenersandmakesuretheyaretight.
14
Hydraulic Fluid and Inlet Filter
Cheekthehydraulicfluidlevelinthelogsplitterreservoirtank
beforeeachuse.Maintainfluidlevelwithintherangespecifiedon
thedipstickatalltimes.
,, Changethehydraulicfluidinthereservoirevery 100hoursof
operation.Followthestepsbelow:
1. Disconnectthesuctionhosefromthebottomofthereservoirtank.
2. Carefullyunthreadtheinletfilterandcleanitwithpenetratingoil.
SeeFigure5-2.
3. Allowthefluidtodrainintoa suitablecontainer.
4. Reinsertthefilterandrefillthereservoirwiththreegallonsof
oil.ApprovedfluidsincludeDexron®III/ Mercon®IIIautomatic
transmissionfluid,a 10WeightAWhydraulicoilor Pro-MixTM
AW-32HydraulicOil.
,, Maintainfluidlevelwithinthe rangespecifiedonthedipstickatall
times.
NOTE:Alwaysdisposeofusedhydraulicfluidand engineoilat
approvedrecyclingcentersonly.
Contaminantsin fluidmaydamagethehydrauliccomponents.
Flushingthereservoirtankand hoseswithkerosenewhenever
serviceisperformedon thetank,hydraulicpumporvalveis
recommended.Anyrepairtothehydrauliccomponentsshouldbe
performedbya SearsServiceCenter.
_ ARNING:Useextremecautionwhenworkingwith
kerosene.It isan extremelyflammablefluid.
Hydraulic Filter
,, Changethehydraulicfilterevery50 hoursofoperation.Useonlya
10micronhydraulicfilter.Orderpartnumber723-0405.
Beam and Splitting Wedge
,, Lubricatebothsidesofthebeam(whereitcomesintocontactwith
thesplittingwedge),beforeeachuse,withengineoil.Thewedge
plateonthelog splitterisdesignedso thegibsonthesideofthe
wedgeplatecanbe removedandrotatedand/orturnedoverfor
evenwear.
,, Makecertaintoreadjusttheadjustmentboltssowedgemoves
freely,butnoexcessspaceexistsbetweenthewedgeplateandthe
beam.
/ ,......... /
/
/ /,
i \ /
\
\
\
,J
Figure 5-2
Engine
Check Engine Oil
1. Stopengineandwaitseveralminutesbeforecheckingoil level.
2. Removeoil filldipstick.
3. Checkoil levelondipstick.Withengineonlevelground,theoil
mustbetoFULLmarkondipstick.
4. Replacedipstickandtighten.
Changing Engine Oil
Onlyusehighqualitydetergentoil ratedwithAPIserviceclassification
SF,SG,or SH.Selecttheoil'sSAEviscositygradeaccordingtothe
expectedoperatingtemperature.Followthechartbelow:
Colder -4 32°F _ Warmer
5W30 SAE30
Oil Viscosity Chart
15
2 3
II
II
1..030 (.76 mm) Gap
2. Electrodes
3. Porcelain
Servicecartridgeevery25operatinghoursor everyseason.Service
cartridgemoreoftenunderdustyconditions.
To Service Air Filter
1. Loosenaircleanercoverscrew,butdo notremovescrewfrom
cover.Swingcoverdownto removefromhinge.
2. Inspectfilterfordiscolorationor dirtaccumulation.If eitheris
present,proceedasfollows:
a. Cleaninsideof bodyand coverthoroughlyandremovecartridge.
b. Reassemblenewcartridgeinthebody.Swingcoverdownand
tightenthescrewloosenedearlier.
,_ Temperatureof muffler and nearbyareasmayexceed150°F(65°0).Avoidthese areas.
J
Figure 5-3
NOTE:Althoughmulti-viscosityoils(5W30,10W30,etc.)improve
startingincoldweather,theywillresultinincreasedoil consumption
whenusedabove32°RCheckyourengineoillevelmorefrequentlyto
avoidpossibleenginedamagefromrunninglowonoil.
Changeengineoil afterthefirstfivehoursofoperation,andevery50
hoursthereafter.Changeoil every25hoursofoperationiftheengine
isoperatedunderheavyloadorin highambienttemperatures.
To Drain Oil
Drainoilwhileengineiswarm.Followthe instructionsgivenbelow.
1. Todrainthegastank,starttheengineandletit rununtilthefuel
lineandcarburetorareempty.
2. Removedrainplugon thesideoftheengineanddrainoil intoa
suitablecontainer.
3. Whenengineisdrainedofalloil, replacedrainplugand refillwith
approximately20 oz.offreshoil.RefertoGasAndOilFill-upin
OPERATIONsection.
Service Air Cleaner
Theair cleanerpreventsdamagingdirt, dust,etc.,fromenteringthe
carburetorandbeingforcedintotheengineandisimportanttoengine
lifeand performance.
Service Spark Plug
Cleanthesparkplugand resetthegapto.030"atleastoncea
seasonor every50 hoursofoperation.
Cleanareaaroundsparkplug.Removeand inspectsparkplug.
Replaceifelectrodesarepitted,burnedor theporcelainiscracked.
Checkelectrodegapwithwirefeelergaugeandresetgapto.030
inches.SeeFigure5-3.
NOTE:Donotsandsparkplug.Sparkplugshouldbe cleanedwitha
wirebrushandacommercialsolvent.
Clean Engine
,, Cleanengineperiodically,byremovingdirtanddebriswitha cloth
or brush.
NOTE:Cleaningwitha forcefulsprayofwaterisnotrecommendedas
watercouldcontaminatethefuelsystem.
,, Toensuresmoothoperationoftheengine,keepthegovernor
linkage,springs,andcontrolsfreeofdebris.
,, Every100hoursofoperation,removecombustiondepositsfrom
topofcylinder,head,topof piston,andaroundvalves.
_ WARNING:Never runthe enginewithout an air
cleanercompletelyassembled.
16
Prepareyourlogsplitterforstorageattheendoftheseasonor ifthe 2. Starttheengineand letitrununtilthefuellinesandcarburetorare
logsplitterwillnotbe usedfor30daysor more. empty.
_ ARNING:Neverstoremachine withfuel inthe
fuel tank insideofbuildingwherefumes mayreach
an open flame or sparkor whereignitionsources
are presentsuchas hotwater and spaceheaters,
furnaces, clothesdyers,stoves,electricmotors, etc.
IMPORTANT:Neveruseengineor carburetorcleanerproductsinthe
fueltankor permanentdamagemayoccur.Usefreshfuelnextseason.
3. Removesparkplug,pourapproximately1/2oz.ofengineoil into
cylinderandcrankslowlyto distributeoil.
4. Replacesparkplug.
NOTE:Yearlycheck-upbyyourlocalSearsservicecenterisa good
waytoensureyourlogsplitterwillprovidemaximumperformancenext
season.
Log Splitter
1. Cleanthelogsplitterthoroughly.
2. Wipeunitwithan oiledragtopreventrust,especiallyonthewedge
andthebeam.
NOTE:Fuelstabilizerisan acceptablealternativeinminimizingfor
formationoffuelgumdepositsduringstorage.
Pleasefollowtheinstructionsbelowforstoringyourlogsplitterwith
fuelandstabilizerin theengine:
1. Addstabilizertogasolineinfueltankorstoragecontainer.Always
followthemixratiofoundonstabilizercontainer.
2. Runengineatleast10minutesafteraddingstabilizertoallowthe
stabilizerto reachthecarburetor.
Engine
IMPORTANT:It isimportanttopreventgumdepositsfromformingin
essentialfuelsystempartssuchascarburetor,fuelfilter,fuelhose,
ortankduringstorage.Also,alcoholblendedfuels(calledgasoholor
usingethanolor methanol)canattractmoisturewhichleadstosepara-
tionandformationofacidsduringstorage.Acidicgascandamagethe
fuelsystemofanenginewhileinstorage.
1. Drainthefueltank.Alwaysdrainfuelintoapprovedcontainer
outdoorsawayfromopenflame.Besuretheengineiscool. Donot
smokewhilehandlingthefuel.
IMPORTANT:Donotdrainthegastankandcarburetorif usingfuel
stabilizer.Drainalltheoil fromthecrankcase(thisshouldbe done
aftertheenginehasbeenoperatedand isstillwarm)andrefillthe
crankcasewithfreshoil.
Other
,, Donotstoregasolinefromoneseasontoanother.
,, Replaceyourgasolinecanif itstartstorust.
,, Storeunitin aclean,dryarea.Donotstorenexttocorrosive
materials,suchasfertilizer.
,, Wipeequipmentwithan oiledragtopreventrust.
17
Problem Cause Hemedy
Enginefails to start I 1. Sparkplugwiredisconnected• I 1. Connectwireto sparkplug.
2 Fueltank erupt orstalefuel 2 F tankwth cean,freshgaso ne
y . ,
3. Chokelevernotin CHOKEposition• 3. Movechoketo CHOKEposition•
4 Fault sparkplug 4 Servicesparkplugfollowing
y ,
instructionsinthemaintenance
section
5 Bockedfue ne
5. Cleanfuelline•
6. Serviceair cleanerfollowing
I 6. D_rtyair cleaner• instructionsinthemaintenance
section•
Enginerunserratic 1. Unitrunningwith CHOKEapplied,ifsc 1. MovechokelevertoRUNposition.
equipped.
2. Sparkplugwireloose. 2. Connectandtightenspark
plugwire.
3. Blockedfuellineor stalefuel. 3. Cleanfuelline;filltankwithclean,
fresh(lessthan30 daysold)
gasoline.
4. Waterordirt infuelsystem. 4. Drainfueltank.Refillwith
freshfuel.
5. Dirtyair cleaner. 5. Cleanor replaceaircleaner.
6. Carburetornotadjustedproperly. 6. ContactSearsservicecenter.
EngineOverheats 1. Engineoil levellow, 1. Fillcrankcasewith prope_oil.
2. Dirtyaircleaner• 2. Serviceair cleanerfollowing
instructionsinthemaintenance
I secton
3. Carburetornotadjustedpropery,
- " 3. ContactSearsservicecenter•
Cylinder rodwill not 1. Brokendriveshaft. 1. ReturnunittoSearsservicecenter.
move 2. Shippingplugsleftin hydraulichoses.
3. Setscrewsincouplingnotadjusted
properly.
4. Looseshaftcoupling.
5. Gearsectionsdamaged.
6. Damagedreliefvalve.
7. Hydrauliclinesblocked.
8. Incorrectoil level.
9. Damagedorblockeddirectionalvalve.
2. Disconnecthydraulichoses,
removeshippingplugs,reconnect
hoses.
3. Seeoperator'smanualforcorrect
adjustment.
4. Correctengine/pumpalignmentas
necessary.
5. ReturnunittoSearsservicecenter.
6. ReturnunittoSearsservicecenter.
7. Flushandcleanhydraulicsystem.
8. Checkoil level.Refillif necessary.
9. ReturnunittoSearsservicecenter.
NOTE:This sectionaddressesminor serviceissues. Forfurther details,contact Searsservice informationline by calling
1-800-4-MY-HOME.
18
Problem Cause Remedy
-Slow Cy!inder Shaft !. Gear sectionsdamaged; ! Return unittOSearsserviceCenter•
Speed whileextending 2, Excessivepumpinletvacuum. 2. MakeCertainpumpinlethosesare
and retracting. CharandunblOCked.Usesh0rt,
largediameterin!ethoses.
3 ReturnunttoSears ServceCenter
& Sowengnespeed. ,,
I 4 Returnuntto _earsservce center
4. Damagedreliefvalve.
..,,,,L_.,,,_,,', 5.Checkoil level.Refillif necessary.
5. huu,_u_ui__evel.
6 Dran o ceanreserver and ref
6. Contaminatedoil.
I 7 Returnuntto SearsservceCenter
7. Directionalvalveleakinginternally.
8. Returnunttosears servcecenter.
- 8. Internallydamagedcylinder.
LeakingCylinder 1. Brokenseals. 1. Returnunitto Searsservicecenter.
2. Scoredcylinder. 2. Returnunitto Searsservicecenter.
Engineruns loutwood !, Smal!gearsectiondamaged, . !, Return unittoSearsserviceCenter.
Wi!l notSplitor wood £ PumpCheCkvaiveleaking, Returnunitto seais servicecenterl
sp tstoo Sow y 31 ExcessivepumpinletVacuUml MakeCertainpumpinlethosesare
u : . , 4. Checkoil evel.Refillif necessary.
,_. nco:_recto eve.
" 5. Drainoil,cleanreservoir,andrefill.
" 5. Contaminatedoil.
6 ReturnunttoSearsservcecenter
6. Directionalrave leaKinginternally. '
_ X _, : 7. Donotattempttospltwood
/ uveroaaea cy naer ain the rain
: : ag st g .
8 Internallydamagedcyhnder
' I 81 ReturnUnittosearsServiCecenterl
Enginestalls during 1. Lowhorsepower/weakengine. 1. Returnunitto Searsservicecenter.
splitting 2. Overloadedcylinder. 2. Donotattempttosplitwood
againstthegrain.Ifenginestalls
repeatedly,contactSearsservice
center.
Enginewill not turnor !. Engine!pumpmisa!ignment. 1. Co[rectalignmentas necessary.
I m
stalls under low!cad 2. Frozenorseizedpump. 2, ReturnunittoSearsservicecenter.
€ondt Ons I 3 LOWhersepoweriweakengne ReturnUnttoseais servceCenter
4. Hydraulclinesblocked. 4, Flushandcleanhydraulicsystem.
I &Blocked directionalvalve. I 5. ReturnUnittosears ServiCeCenter•
Leakingpumpshaft
seal
1. Brokendriveshaft.
2. Engine/pumpmisalignment.
3. Gearsectionsdamaged.
4. Poorlypositionedshaftseal.
5. Pluggedoil breather.
1. Returnunitto Searsservicecenter.
2. Correctalignmentas necessary.
3. Returnunitto Searsservicecenter.
4. Returnunitto Searsservicecenter.
5. Makecertainreservoiris properly
vented.
Will notsplit logs 1. Reservoirfluidlevellow. 1. Refillwith Dexronill automatic
transmissionfluid.
NOTE:This sectionaddressesminor service issues.Forfurther details,contact Searsservice informationline by calling
1-800-4-MY-HOME.
19
Craftsman 6.5 H.P. Log Splitter Model 247.77466.1
Ref.
No,
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
PartNo.
Description
718-0769A HydraulicCylinder
727-04166 HydraulicTube
710-1018 HexCapScrew1/2-20x2.75
737-0192 90 DegreeSolidAdapter
718-0481A ControlValve
737-0153 ReturnElbow
737-0238 NipplePipe1/2-14
710-1806 HexCapScrew1/2-13x3.25
719-0550A WedgeAssembly
712-3058 HexLockNut,1/2-20
712-0711 HexJamNut3/8-24
710-0459A HexCapScrew3/8-24x 1.5
781-0351 AdjustableGib
736-0116 FlatWasher.635x.93x.06
712-3022 HexLockNut 1/2-13
681-04071 BeamAssembly
710-3056 HexScrew,5/16-18x3.25
710-0654A HexWasherScrew3/8-16x1.0
781-1048A DislodgerBracket
781-0790 BackPlate
737-04093 InletFilter
727-0443 ReturnHose3/4"IDx 44"Lg.
726-0132 HoseClamp5/8"
737-0316 FilterHousing
723-0405 Oil Filter
734-0873 HubCap
714-0162 CotterPin
712-0359 SlottedNut3/4-16
634-0186 WheelAssembly
736-0351 FlatWasher.760ID x.500OD
737-0312 Adapter3/4-14
781-0526A HoseGuard
737-0348A VentedDipstick
711-1587 ClevisPin
781-0690 LockRod
714-0470 CotterPin
726-0214 PushCap
732-0583 CompressionSpring
781-04180 LogTrayBracket
Ref. PartNo. Description
No,
40. 710-0650 TT Screw,5/16-18x.875
41. 712-04065 FlangeLockNut,3/8-16
42. 781-04129 LogTray
43. 681-04040 FrameAssembly
44. 710-0521 HexBolt3/8-16x 3"
45. 719-0353 CouplingShield
46. 714-0122 SquareKey3/16"x.75
47. 718-04145 FlexibleCoupling
48. 712-04063 FlangeLockNut,5/16-18
49. 781-0097 RearCouplingSupportBracket
50. 781-1024 FenderMountingBracket
51. 727-04130 Hose
52. 718-04127 GearPump
53. 737-0329 45 DegreeElbowFitting
54. 727-0502 HighPressureHydraulicHose
55. 781-0788 TongueAssembly
56. 747-1261 LatchRod
57. 781-1045 Latch
58. 732-3127 CompressionSpring
59. 736-0371 FlatWasher
60. 781-0538At HoseGuard
61. 710-3085 HexCapScrew,3/8-16x3.50
62. 736-0185 FlatWasher,.375x.738x.063
63. 747-04539 HydraulicValveControl
64. 681-04030 HitchCouplingAssembly
65. 713-0433A Chain
66. 731-2499A Fender
67. 711-0813 ClevisPin
68. 720-04088 Grip
69. 732-0194 SpringPin
70. 781-0789 JackStand
71. 715-0120 SpiralPin
72. 710-0650 TT Screw,5/16-18x 0.875"
73. 710-0602 TT Screw,5/16-18x 1.00
74. 711-04585 ClevisPin
75. 713-04036 ValveHandleLink
76. 714-0111 CotterPin
77. 710-0376 HexScrew,5/16-18x 1.00
1 NotShown
21
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Craftsman 247774661 Owner's manual

Category
Log splitters
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages