2. Global Sources
  3. C93
C93

Global Sources C93 User manual

  • Hello! I've reviewed the user manual for the Blind Spot Detection System C93. This manual details the system's function and troubleshooting, including self-checking, LED/buzzer warnings, and specific conditions that might delay or prevent alarm activation. I'm ready to answer your questions about the device and its usage described in this document.
  • What does the system do after the vehicle is switched on?
    When may the system alarm lights and warning sounds not be activated or delayed?
    What should be checked if the system is not flashing?
Item No. 2621376
Sticker
Screw
Screw Hole Cove
Cable Tie
12
10
4
4
3
10
11
Radar Sensor
DC 9V ~ 30V
480mA
After installation and adjustment, the product has the following functions:
4.1 The system starts the self-checking function.
After the vehicle switch on, the system starts the self-test function, LED lights
up for two seconds, the buzzer sounds one time , and then the system goes
into standby operation.
/