2. ASA Electronics
  3. SXV300V1M

ASA Electronics SXV300V1M Operating instructions

  • Hello! I've reviewed the Work Instruction document for the SXV300V1M tuner. This document outlines the process of preparing each device for shipment, including removing the antenna, applying labels, and doing the first part inspection. If you have any questions regarding these procedures I'm ready to help.
  • What should be done with the antenna?
    Where should the part number label be placed?
    What should be done with UPC code?
Date: 11/17/2015
Written By
Doc. Revision: B B. Woods
Revision Date: 2/7/2020 Approved By
ASA Model #: SXV300V1M D. Stoltzfus
3. Place a 2x4 Part number Label in the lower corner of the product box right do not cover serial number.
6. Get first piece inspection.
Work Instruction: SXV300V1M
1. Pull items for kit as per Work Order/JDE
2. Remove antenna. Place 1x3" label with "R169159" model to bag (as shown).
5. Antenna will be brought into stock as R169159.
4. Place 1x2 label with UPC # 6 81787 02085 8 code over exsisting UPC.
9/21/2020 1
/