Sonoff D1 User manual

Brand: Sonoff

Model: D1

Type: User manual

Sonoff D1 is a Wi-Fi smart dimmer switch that allows you to remotely control the brightness of your lights from anywhere. You can schedule lights to turn on/off, share control with family, and even use voice commands for hands-free operation. It supports stepless dimming, scene mode customization, and can be controlled via the eWeLink app or with a physical 433MHz remote controller (sold separately). Additionally, it offers LAN control, group control, and the ability to set the power-on state.

User manual V1.1

Wi-Fi Smart Dimmer Switch

SONOFF TECHNOLOGIES CO., LTD. English

ON OF F

N In

L In L Out

100-240V AC

To avoid electric shocks, please consult the dealer or a qualiﬁed professional for help

when installing and repairing! Please do not touch the switch during use.

Operating Instruction

1. Power oﬀ

2. Wiring instruction

Makesuretheneutralwireandlivewireconnectioniscorrect.

The device can only connect incandescentlightbulband dimmable LED light.

3. Download APP

eWeLink

Android™ & iOS

SONOFF TECHNOLOGIES CO., LTD. English

<RM433

4. Power on

After powering on, the device will enter the quick pairing mode (Touch) during the

ﬁrst use. The connected light enters the “breathing mode”.

It will exit the quick pairing mode (Touch) if the device is not paired within 3mins.

If you need to enter this mode again, please power oﬀ and restart the device until

the connected light enters the “breathing mode”.

5.Add the device

Sca n QR c od e

GSM dev ices an d devic es with Q R co

de can be a dded in t his mod e.

Sou nd P ai ri ng

Add dev ice in th is mode i f your

devic e s uppor t this fe ature .

QuickPairing

WIFIdevicescanbeadd edinthismo

de(makesu rethedeviceisinpairing

mode).

AddDevi ce

Tap “+” and select “ Quick Pairing ”, then operate following the prompt on the app.

Pairing method for the device and SONOFF RM433

remote controller:

Short press any button on the RM433 remote controller within 5s after powering on

until you hear “Bi”, which indicates all buttons are paired successfully.

The RM433 remote controller is not included, please purchase it separately.

SONOFF TECHNOLOGIES CO., LTD. English

RM433 Introduction

Short press for the low brightness, long press to turn down the

brightness

Short press for the medium brightness, long press to turn down

the brightness

Off

Functions

Buttons

Short press for the higher brightness, long press to turn up the

brightness

Short press for the high brightness, long press to turn up the

brightness

Long press for 5s until the connected light enters the breathing

mode, which indicates the device enters quick pairing mode (Touch),

then you can add the light on eWeLink APP. In quick pairing mode,

you can short press any button on the remote controller to exit this

mode.

Long press for 5s until you hear “Beep Beep” and release, then

the remote controller is cleared successfully.

Aft er cle arin g c od e i s c om plet ed, if yo u n eed to use , s ho rt

press any button within 5s after powering on again and you

will hear“Beep”, which indicates the remote controller is paired

successfully.

SONOFF TECHNOLOGIES CO., LTD. English

PC V0

62x47x32.5mm

Material

Dimension

D1 is a Wi-Fi smart dimmer switch that is used to adjust the light brightness and set

various atmosphere for your room. You can remotely turn on/oﬀ light of your home

anywhere, schedule it on/oﬀ, or share it with your family to control together.

Features

Remote Control Single/Countdown

Timing Share Control Voice Control Smart Scene

LANControl

433MHzRemote

Control

Stepless dimming Group control

Scene Mode

IEEE 802.11 b/g/n 2.4GHz

Android & iOS

RF 433.92MHz

100-240VAC50/60Hz

-10℃~40℃

Specifications

Light Load

Model

Input

Output

Incandescent:200W LED:150W

Operating systems

Wi-Fi

Working temperature

→ → → → →

1S 1S 1S 1S 1S

Factory Reset

Turn on and oﬀ 3 times on repeatedly or delete the connected light on eWeLink

APP until it enters “breathing mode”, then the device is reset successfully and enters

quick pairing mode (Touch).

Please reset the device to factory defaults if you want to use other Wi-Fi networks,

then reconnect the network.

SONOFF TECHNOLOGIES CO., LTD. English

Dev ice Set tings

LAN c ontro l

Dev ice Set tings

Pow er-on S tate ON

Set b right ness ra nge

Dev ice inf o

Man ufact ure r

Mod el

Dev ice ID

Mac a ddres s

FW Na me

Delete device

Sche dul e Tim er

SONOFF TECHNOLOGIES CO., LTD. FCC Warning

FCC Radiation Exposure Statement:

FCC Warning

Changes or modiﬁcations not expressly approved by the party responsible for

compliance could avoid the user’s authority to operate the equipment.

Note:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit diﬀerent from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum

distance20cm between the radiator & your body. This transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment

oﬀ and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

Shenzhen Sonoﬀ Technologies Co., Ltd.

MADE IN CHINA

1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China

ZIP code: 518000

Website: sonoﬀ.tech

https://sonoﬀ.tech/usermanuals

Hereby, Shenzhen Sonoﬀ Technologies Co., Ltd. declares that the radio equipment

type D1 is in compliance with Directive 2014/53/EU.The full text of the EU declaration

of conformity is available at the following internet address:

TX Frequency:

WiFi: 2412-2472MHz

RX Frequency:

WiFi: 2412-2472MHz SRD: 433.92MHz

Output Power:

11.52dBm(802.11b), 11.33dBm(802.11g), 11.07dBm(802.11n20

Sonoff D1 User manual

Sonoff D1 User manual

Related papers