•Fitting material:
W55: Steel with alabaster glass lens.
W141: Steel with scavo glass.
W319: Steel with opal glass
W321: Steel / aluminium with frosted glass lens.
•Lamp type: Excluding 1 x E27 maximum 60W GLS
•Protection against electric shock: Class 1. Requires earthing.
•IP Rating: IP20. Protected against solid foreign objects of 50mm Ø and greater.
Not protected against water.
•Voltage: 220V - 240V ~ 50Hz.
•Commercial/domesticuse.
•Notforuseoutdoorsorinareasexposedtomoisture,EG.BathroomsorKitchens
•Maximum Ambient temperature range: 20ºC - 40ºC.
•Dimensions:
W55: (H)150mm x (W)300mm x (D)105mm.
W141: (H)155mm x (W)300mm x (D)95mm.
W319: (H)155mm x (W)300mm x (D)110mm.
W321: (H)195mm x (W)360mm x (D)90mm.
•Spare Glass:
W55: X289
W141: X221.
W319: MC444
W321: N/A
W55 / W141 / W319 / W321 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusively
replacedbythemanufacturerorhisserviceagentorasimilarqualiedpersoninorderto
avoid a hazard. To ensure that you get maximum longevity and maximum use out of your
luminaire, please observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the
luminairemustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.
Oncompletionofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsand
safety requirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminaire
must not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliable
before installation.
•Ifyourmainswiringdiffersinanywayfromdiagram,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
•Outdoorluminairesmustbecleanedtopreventrustoccurring.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
•Before installation always ensure the power supply is turned off.
•Thisluminaireisonlysuitableforxedmounting.
•Insert (plastic anchor) onto mounting surface. Test to ensure the mounting surface will hold
the weight of the luminaire.
•Fix the bracket onto the mounting surface with the self-tapping screws.
•Connect the power supply wires to the terminal block.
•Fixthettingintothebracketwiththescrews.
•Fix the lamp into the lamp holder.
•Fix the lamp / glass shades.
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.