Ten-Tec RX-321 is an OEM product manufactured by Ten-Tec under an agreement with third parties and never produced with the Ten-Tec brand name. Based on the RX-320D receiver, additional circuitry supports integration with a transmitter, and an RF preselector and 600 Ohm audio output are included. It is capable of receiving AM, SSB, and CW signals from 100 kHz to 30 MHz and is controlled by an external computer via a serial connection. The RX-321 is powered from a 12-28 VDC power supply and uses a 50-ohm antenna with an SO239 connector.
Ten-Tec RX-321 is an OEM product manufactured by Ten-Tec under an agreement with third parties and never produced with the Ten-Tec brand name. Based on the RX-320D receiver, additional circuitry supports integration with a transmitter, and an RF preselector and 600 Ohm audio output are included. It is capable of receiving AM, SSB, and CW signals from 100 kHz to 30 MHz and is controlled by an external computer via a serial connection. The RX-321 is powered from a 12-28 VDC power supply and uses a 50-ohm antenna with an SO239 connector.
Ten-Tec RX-321 is an OEM product manufactured by Ten-Tec under an agreement with third parties and never produced with the Ten-Tec brand name. Based on the RX-320D receiver, additional circuitry supports integration with a transmitter, and an RF preselector and 600 Ohm audio output are included. It is capable of receiving AM, SSB, and CW signals from 100 kHz to 30 MHz and is controlled by an external computer via a serial connection. The RX-321 is powered from a 12-28 VDC power supply and uses a 50-ohm antenna with an SO239 connector.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI