Front Speaker System
SB-LV500
Center Speaker System
SB-C500
Surround Speaker System
SB-S500
Operating Instructions
Instrucciones de funcionamiento
Mode d’emploi
Bruksanvisning
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Brugsvejledning
Instrukcja dla uz˙ ytkownika
Návod k obsluze
SB-LV500
SB-C500
SB-S500
RQT4517-3E
E GC
Niniejsza instrukcja zostal⁄ a opracowana na podstawie oryginalnej
publikacji firmy MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
2
Dear Customer Estimado Cliente
Thank you for purchasing this product.
Before operating this unit, please read these instructions
completely. Please save this manual.
This manual combines the operating instructions for the following
speaker systems.
Gracias por adquirir este producto.
Antes de operar este aparato, tenga la bondad de leer estas
instrucciones completamente. Por favor guarde este manual.
Este manual combina las instrucciones de operación para los
sistemas de altavoces siguientes.
Lieber Kunde
Vielen Dank, daß Sie sich für dieses Gerät entschieden haben.
Lesen Sie bitte diese Bedienungsanleitung genau durch, bevor Sie
das Gerät verwenden.
Diese Bedienungsanleitung enthält die Anleitungen für die
folgenden Lautsprechersysteme:
Drogi Uz˙ytkowniku
Dzie˛kujemy za zakupienie niniejszego produktu.
Przed uz˙ ytkowaniem niniejszych urza˛dzen´ , prosimy o uwaz˙ ne
zapoznanie sie˛ z instrukcja˛ obsl⁄ ugi. Prosimy o zachowanie
niniejszej instrukcji.
Niniejsza instrukcja obsl⁄ ugi zawiera instrukcje dotycza˛ce
naste˛puja˛cych zestawów gl⁄ os´nikowych.
Caro cliente
Grazie per aver acquistato questo prodotto.
Prima di operare sull’unità, leggere attentamente queste istruzioni.
Conservare questo manuale.
Questo manuale riunisce le istruzioni d’uso per i seguenti sistemi
altoparlanti.
Vázˇeny´ zákazníku
Deˇkujeme za zakoupení tohoto vy´robku.
Drˇíve nezˇ zacˇnete jakékoli operace s touto jednotkou, prostudujte si
prosím cely´ tento návod. Uschovejte si prosím tento návod k
obsluze.
Tento návod k obsluze lze pouzˇívat pro následující reproduktorové
systémy.
Front speakers
Center speaker
Surround speakers
SB-LV500
SB-C500
SB-S500
Przedni zestaw gl⁄ os´nikowy SB-LV500
Centralny zestaw gl⁄ os´nikowy SB-C500
Otaczaja˛cy zestaw gl⁄ os´nikowy SB-S500
SB-LV500
SB-C500
SB-S500
C
ˇ
elní reprosoustavy
Centrální reprosoustava
Prostorové reprosoustavy
SB-LV500
SB-C500
SB-S500
Vorderer Lautsprecher
Mittenlautsprecher
Surround-Lautsprecher
SB-LV500
SB-C500
SB-S500
Altoparlanti frontali
Altoparlante centrale
Altoparlanti surround
SB-LV500
SB-C500
SB-S500
Altavoces delanteros
Altavoz central
Altavoces surround
SB-LV500
SB-C500
SB-S500
Accessories
Accesorios
Accessoires
Tillbehör
Zubehör
Accessori
Accessoires
Tilbehør
Wyposaz˙enie
Prˇíslusˇenství
Speaker feet (8 psc.)
Patas de altavoces (8 piezas)
Pieds d’enceinte (8)
Högtalarfötter (8 st.)
Lautsprecher-Gummifüße (8 Stück)
Piedini per altoparlanti (8 p.zi)
Luidsprekervoeten (8 stuks)
Højttalerfødder (8 stk.)
Podkl⁄ adka (8 szt.)
Nozˇky reprosoustavy (8 ks)
Metal wall mounts (2 pcs.)
Monturas de pared de metal (2 piezas)
Fixations murales en métal (2)
Metallbeslag för väggmontering (2 st.)
Metallhalterungen (2 Stück)
Sostegni metallici per montaggio
a muro (2 p.zi)
Metalen muurbevestigingsstukken
(2 stuks)
Metalbeslag til ophængning (2 stk.)
Metalowy uchwyt s´cienny (2 szt.)
Kovové steˇnové úchytky (2 ks)
Screws (4 pcs.)
Tornillos (4 piezas)
Vis (4)
Skruvar (4 st.)
Schrauben (4 Stück)
Viti (4 p.zi)
Schroeven (4 stuks)
Skruer (4 stk.)
S
´
ruby (4 szt.)
S
ˇ
rouby (4 ks)
SB-LV500
Page is loading ...
4
ENGLISH
ESPAÑOL
FRANÇAIS
SVENSKA
Features Características
A B
SB-C500
ON
CENTER
FOCUS
OFF
Center focus function
The center speaker (SB-C500) has a center focus function. This
function takes advantage of the relationship between the sense of
hearing and the psychological properties of hearing and sight. This
means that center channel sounds-for example actors voices-seem
to come from the TV screen, even if the speaker itself is on top of
the TV. Try it out with a movie.
: The actual sound
: How it seems to be coming
How to turn the center focus on
Use the switch on the back of the speaker to turn it on.
Turn it off when it is not needed.
Dipole surround
The surround speakers SB-S500 reproduce mid-to low frequency
signals from the front and mid-to high frequency signals from the
rear. With Technics specially developed mode, a dipole sound field
is created around mid range signals.
The sound from the surround speakers is more natural because it is
not aimed directly at the listener.
To get the best out of bass sounds, the low frequency sound range
is not split. Tweeters are fitted to the rear to deal with sources that
need conspicuous orientation (e.g. AC-3).
: Dipole sound field
LOW: Low frequency sound
MID: Mid frequency sound
HIGH: High freqency sound
SPL: Sound Presure Level
High quality dome tweeter
The dome tweeters in these speakers are coated with a carefully
selected special high polymer so that the tweeters perform their
function (i.e. lessening the inferiority of signal transmission) even
better. Playback in the high frequency range has a better quality
because of this.
SB-S500SB-C500SB-LV500
SB-S500
C
B
SB-C500
A
TV
Televisor
Téléviseur
TV
Center focus switch
Interruptor de foco central
Interrupteur de mise au point centrale
Omkopplare för mittfokus
Función de foco central
El altavoz central (SB-C500) tiene una función de foco central.
Esta función se aprovecha de la relación entre el sentido del oído y
las propiedades psicológicas del oído y la vista. Esto significa que
los sonidos del canal central-por ejemplo las voces de los actores-
parecen venir de la pantalla del televisor, aunque el altavoz mismo
estuviera encima del televisor. Haga la prueba con una película.
: El sonido real
: Como parece estar viniendo
Cómo encender el foco central
Use el interruptor en la parte de atrás del altavoz para encenderlo.
Apáguelo cuando cuando no lo necesite.
Surround dipolo
Los altavoces surround SB-S500 reproducen señales de media a
baja frecuencia por la parte delantera y señales de frecuencia
media a alta desde la parte posterior. Con un modo especialmente
desarrollado por Technics, un campo de sonido dipolo es creado
alrededor de las señales de rango medio.
El sonido de los altavoces surround es más natural porque no está
dirigido directamente al oyente.
Para obtener lo mejor de los sonidos graves, el sonido de baja
frecuencia no está dividido. Altavoces de agudos (tweeters) están
instalados en la parte posterior para encargarse de fuentes que
necesitan una orientación conspicua (p.ej. AC-3).
: Campo de sonido dipolo
LOW: Sonido de baja frecuencia
MID: Sonido de frecuencia media
HIGH: Sonido de frecuencia alta
SPL: Nivel de la presión de sonido
Altavoz de agudos (tweeter) de domo
de alta calidad
Los tweeters de domo en estos altavoces están revestidos con un
alto polímero especial cuidadosamente seleccionado de modo que
los tweeters realicen su función (esto es, disminuir la inferioridad de
la señal de transmisión ) aún mejor. La reproducción en el rango de
alta frecuencia tiene una mejor calidad debido a ésto.
SB-S500SB-C500SB-LV500
SB-S500
C
B
SB-C500
A
Page is loading ...
6
ENGLISH
ESPAÑOL
FRANÇAIS
SVENSKA
Positioning the speakers Colocando los altavoces
The diagram above shows the basic positioning of each speaker.
Front speakers
Position these speakers on either side of the TV facing toward the
listening position.
The sound reproduced by a speaker system is easily influenced by
such factors as room acoustics and the system’s location in the
room. Before finally deciding where the speakers are to be placed,
please read the following information carefully.
The bass sound will be increased if the speakers are placed on
the floor or close to a wall due to the reflection of sound. It is
therefore possible to adjust the bass sound to some extent by
adjusting the speaker’s distance from the wall and floor.
Undesirable resonance occurs if the speakers face a hard wall or
window. Curtains or similar materials can be used to prevent
these reflections.
To prevent possible acoustic feedback, the speaker systems
should be kept away from the turntable. This feedback (howling)
can result from vibrations from the speakers. The turntable
should, therefore never be placed on the same surface as the
speaker system. A thick piece of felt or similar material can be
used under the turntable to reduce this problem. Closing the
turntable’s cover also reduces this problem.
Center speaker
Set either on top or underneath the TV.
Surround speakers
Attach the speaker to the wall at a position which is at ear level and
slightly behind the listening point.
If the speaker cannot be attached to the wall, it can alternatively be
placed on top of a shelf or on the floor.
(
a
See page 8.)
To enjoy natural sound effects, ensure that the speakers are
connected to their respective terminals. The speakers are marked
on the rear so that it is easy to identify the left and right side and the
direction they should be faced.
Note
SB-S500
SB-C500
SB-LV500
Front speaker (right)
Altavoz delantero (derecho)
Enceinte avant (droite)
Framhögtalare (höger)
Center speaker
Altavoz central
Enceinte centrale
Mitthögtalare
Front speaker (left)
Altavoz delantero (izquierdo)
Enceinte avant (gauche)
Framhögtalare (vänster)
TV
Televisor
Téléviseur
TV
El diagrama de arriba muestra la colocación básica de cada
altavoz.
Altavoces delanteros
Coloque estos altavoces a cada lado del televisor mirando hacia la
posición de escucha.
El sonido reproducido por un sistema de altavoces es fácilmente
influenciado por factores tales como la acústica de la habitación y la
ubicación del sistema en ella. Antes de decidir finalmente dónde
serán ubicados los altavoces, tenga la bondad de leer
cuidadosamente la siguiente información.
El sonido de graves se incrementará si los altavoces son
ubicados en el piso o cerca a una pared debido a la reflexión del
sonido. Por lo tanto es posible ajustar el sonido de los graves en
cierta medida regulando la distancia del altavoz desde la pared y
desde el piso.
Resonancia no deseada ocurre si los altavoces miran a una pared
dura o una ventana. Se puede usar cortinas o materiales
similares para prevenir estas reflexiones.
Para prevenir un posible regreso acústico, los sistemas de
altavoces deberán ser mantenidos lejos del tocadiscos. Este
regreso (silbido) puede resultar de vibraciones que vienen de los
altavoces. Por ésto, el tocadiscos nunca deberá ser ubicado en la
misma superficie que el sistema de altavoces. Un pedazo de
paño grueso o material similar puede ser usado bajo el tocadiscos
para reducir este problema. Cerrando la cubierta del tocadiscos
también reduce este problema.
Altavoz central
Colóquelo ya sea encima o debajo del televisor.
Altavoces surround
Adose el altavoz a la pared en una posición que esté al nivel de la
oreja y ligeramente detrás del punto de escucha.
Si el altavoz no puede ser adosado a la pared, puede ser
alternativamente colocado encima de un estante o en el piso.
(a Ver la página 8.)
Para disfrutar de los efectos de sonido naturales, asegúrese que
los altavoces estén conectados a sus respectivos terminales. Los
altavoces están marcados en la parte posterior de modo que sea
fácil identificar los lados izquierdo y derecho y la dirección en la que
deberán mirar.
Nota
SB-S500
SB-C500
SB-LV500
Page is loading ...
8
ENGLISH
ESPAÑOL
FRANÇAIS
SVENSKA
Positioning the speakers Colocando los altavoces
A
30-35mm
5-7mm
12 3
Installation on a wall
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isn’t. Consult with your Technics
dealer before installation.
1 Attach the metal wall mount (included).
2 Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3 Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
To prevent damage to the speakers, lay them on top of a soft
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
topple.
Note
SB-S500SB-C500SB-LV500
B
Note
SB-S500SB-LV500
A
Metal wall mount (included)
Montura de pared de metal
(incluida)
Fixation murale en métal (fournie)
Metallbeslag för väggmontering
(medföljer)
Screws (included)
Tornillos (incluidos)
Vis (fournies)
Skruvar (medföljer)
Wood screw (not included)
Tornillo para madera (no incluido)
Vis à bois (vendue séparément)
Träskruv (medföljer ej)
Instalación en una pared
Prepare los altavoces delanteros y surround siguiendo el método
que se explica a continuación. La ilustración de arriba muestra
cómo se prepara los altavoces surround. El mismo método también
se aplica a los altavoces delanteros.
Asegúrese que la pared sea lo suficientemente fuerte para soportar
a los altavoces. Si no, hay peligro de que se caigan. Consulte con
su distribuidor Technics antes de la instalación.
1 Fije la montura de pared de metal (incluida).
2 Fije las patas del altavoz (incluidas).
Fije dos a la parte inferior de la parte posterior del altavoz.
3 Instale los altavoces en la pared.
Entornille el tornillo para madera (no incluido) a una parte
gruesa y dura de la pared.
Fijando las patas del altavoz
Fije cuatro patas de altavoz a la base de cada altavoz que va a ser
colocado directamente en el piso o en un estante.
La ilustración de arriba muestra un ejemplo usando el altavoz
central. El método es el mismo para los otros altavoces.
Para prevenir daño a los altavoces, póngalos encima de un paño
suave antes de fijar las patas de altavoz.
Los altavoces delanteros son extremadamente delgados, así que
tenga cuidado de que no se caigan.
Nota
SB-S500SB-C500SB-LV500
B
Nota
SB-S500SB-LV500
A
Do not attempt to attach these speakers to walls using methods
other than those described in this manual.
Caution
No intente adosar estos altavoces usando métodos que no
sean los descritos en este manual.
Cuidado
Page is loading ...
10
ENGLISH
ESPAÑOL
FRANÇAIS
SVENSKA
Connections Conexiones
Before making the connections, switch OFF the power to the
receiver (or amplifier).
Check the input impedance and output power of the receiver
before making any connections. (
a
See “Speaker impedance and
allowed input” on page 12.)
Be sure to connect only positive (+) wires to positive (+) terminals,
and negative (–) wires to negative (–) terminals.
Connection of speaker cables
To prevent damage to circuitry never short-circuit positive (+) and
negative (–) speaker wires.
If using a commercially available 4-mm plug cable
Fully tighten the speaker terminal nut, and then insert the end of the
plug cable into the top of the nut.
B
Note
A
Note
When these speakers are connected to a receiver in order to
enjoy the Dolby Pro Logic System, be sure to set the center
mode on the receiver to the “NORMAL” setting.
SB-S500SB-C500
(–)(+) (–)(+)
(+)(–)
(+)(–)
(+)(–)
(+)(–)
(+)
(–)
(+)
(–)
+–
(+)(–)
(+)
(–)
+–
+
–
(+)
(–)
+
–
(+)
(–)
+
–
SURROUND
CENTER FRONT
RL RL
SB-C500
SB-LV500SB-S500
Speaker cable (not included)
Cable de altavoz (no incluido)
Câble d’enceinte (vendu séparément)
Högtalarkabel (medföljer ej)
Receiver or amplifier (not included)
Receptor o amplificador (no incluidos)
Récepteur ou amplificateur (vendu séparément)
Mottagare eller förstärkare (medföljer ej)
(right)
(derecho)
(droite)
(höger)
(left)
(izquierdo)
(gauche)
(vänster)
(right)
(derecho)
(droite)
(höger)
(left)
(izquierdo)
(gauche)
(vänster)
Antes de hacer las conexiones, apague la alimentación (OFF) del
receptor (o amplificador).
Verifique la impedancia de entrada y la potencia de salida del
receptor antes de hacer cualesquiera conexiones. (
a
Vea
“Impedancia de altavoces y entrada permitida” en la página 12.)
Asegúrese de conectar sólo alambres positivos (+) a terminales
positivos (+), y alambres negativos (–) a terminales negativos (–).
Conexión de los cables de altavoz
Para prevenir daño a la circuitería nunca cortocircuite los alambres
de altavoces positivo (+) y negativo (–).
Si usa un cable de enchufe comercial de 4 mm
Ajuste completamente la tuerca del terminal del altavoz y luego
inserte el extremo del cable de enchufe en la parte superior de la
tuerca.
B
Nota
A
Nota
Cuando estos altavoces son conectados a un receptor para
disfrutar el Sistema Dolby Pro Logic, asegúrese de ajustar el
modo central en el receptor al ajuste “NORMAL”.
SB-S500SB-C500
Page is loading ...
12
ENGLISH
ESPAÑOL
FRANÇAIS
SVENSKA
Note Nota
1. Be sure to reduce the volume on the receiver (or amplifier) when
the signal input exceeds the rated allowable input to avoid
damage to circuitry or other malfunctions.
2. Avoid situations such as.
Direct sunlight
Near heating appliances or other sources of heat
High humidity
3. Never use alcohol, paint thinner, benzine or similar chemicals to
clean the unit as they may damage the finish.
4. Do not touch the diaphragms. Doing so may cause distortion.
Speaker impedance and allowed input
Front speaker SB-LV500
Center speaker SB-C500
Surround speakers SB-S500
Impedance
8 Ω
8 Ω
8 Ω
Allowed input
100 W (DIN)
100 W (DIN)
100 W (DIN)
Caution:
These speakers should only be connected to receivers (or
amplifiers) that have output ratings equal to or less than the above.
You risk blowing either the receiver or your speaker if you use a
stronger receiver. This may result in fire. If equipment is damaged in
any way or unexpected trouble occurs during playback, unplug the
system from its outlet and call a serviceman for assistance.
Speaker demagnetizing design
The front speakers and center speaker are designed to be used in
close proximity to TV, but irregular coloring may result due to how
the system is placed. If such distortion occurs, turn off the TV for
sometime between 15 and 30 minutes. The demagnetizing function
of the TV should eliminate the distortion. If irregular coloring is
continues visible, then move the speaker further away from the TV.
SB-C500SB-LV500
Protection circuitry
These units incorporate speaker protection circuitry to protect the
speaker from damage caused by excessive input or abnormal
signals; when excessive input is detected, input is automatically
interrupted.
If sound is interrupted or changed...
1. Reduce the volume of the receiver (or amplifier).
2. Check the sound source and connections for any problems.
If there is no problem, the protection circuitry will reset in a few
minutes.
After the protection circuit is reset...
Take care not to turn the receiver’s volume up too high.
1. Asegúrese de reducir el volumen en el receptor (o amplificador)
cuando la señal de entrada exceda la entrada nominal permitida
para evitar dañar la circuitería o cualesquiera otros malos
funcionamientos.
2. Evite situaciones tales como:
Luz directa del sol
Cerca de dispositivos de calentamiento u otras fuentes de
calor
Alta humedad
3. Nunca use alcohol, diluyente de pintura, benzina o químicos
similares para limpiar este aparato ya que pueden dañar el
acabado.
4. Nunca toque los diafragmas. El hacerlo puede causar distorsión.
Impedancia de altavoces y entrada permitida
Advertencia:
Estos altavoces deberán ser conectados sólo a receptores (o
amplificadores) que tienen valores nominales de salida iguales o
menores que los de arriba. Ud. se arriesga a hacer volar ya sea el
receptor o su parlante si usa un receptor más potente. Esto puede
resultar en incendio. Si el equipo resulta dañado de cualquier modo
o un problema inesperado ocurre durante la reproducción,
desenchufe el sistema y llame a un agente de servicio para que le
dé asistencia.
Diseño de desmagnetizado de altavoces
Los altavoces delanteros y el altavoz central están diseñados para
ser usados muy cerca del televisor, pero una coloración irregular
puede resultar debido a cómo esté colocado el sistema. Si tal
distorsión ocurre, apague el televisor por entre unos 15 y 30
minutos. La función de desmagnetizado del televisor deberá
eliminar la distorsión. Si la coloración irregular sigue siendo visible,
mueva el altavoz más lejos del televisor.
SB-C500SB-LV500
Estos aparatos tienen incorporada una circuitería de protección
para proteger a los parlantes de daños causados por una excesiva
entrada o señales anormales; cuando una entrada excesiva es
detectada, la entrada es autom á ticamente interrumpida.
Si el sonido es interrumpido o cambiado...
1. Reduzca el volumen del receptor (o amplificador).
2. Chequee la fuente de sonido y las conexiones por si hay algun
problema.
Si no hay problema, la circuitería de protección se repondrá en
unos pocos minutos.
Después que el circuito de protección se ha repuesto...
Cúidese de no elevar demasiado el volumen del receptor.
Altavoz delantero SB-LV500
Altavoz central SB-C500
Altavoces surround SB-S500
Impedancia
8 Ω
8 Ω
8 Ω
Entrada permitida
100 W (DIN)
100 W (DIN)
100 W (DIN)
Circuitería de protección
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
25
POLSKI
C
ˇ
ESKY
C
HIGH HIGH
MID
MID
MID
MID
LOW LOW
SB-S500SB-S500
SPL
LOW MID HIGH
MID-LOW MID-HIGH
Odpowiedz´ cze˛stotliwos´ciowa
Frekvencˇní odezva
Cze˛stotliwos´c´
Frekvence
Center focus function
The center speaker (SB-C500) has a center focus function. This
function takes advantage of the relationship between the sense of
hearing and the psychological properties of hearing and sight. This
means that center channel sounds-for example actors voices-seem
to come from the TV screen, even if the speaker itself is on top of
the TV. Try it out with a movie.
: The actual sound
: How it seems to be coming
How to turn the center focus on
Use the switch on the back of the speaker to turn it on.
Turn it off when it is not needed.
Dipole surround
The surround speakers SB-S500 reproduce mid-to low frequency
signals from the front and mid-to high frequency signals from the
rear. With Technics specially developed mode, a dipole sound field
is created around mid range signals.
The sound from the surround speakers is more natural because it is
not aimed directly at the listener.
To get the best out of bass sounds, the low frequency sound range
is not split. Tweeters are fitted to the rear to deal with sources that
need conspicuous orientation (e.g. AC-3).
: Dipole sound field
LOW: Low frequency sound
MID: Mid frequency sound
HIGH: High freqency sound
SPL: Sound Presure Level
High quality dome tweeter
The dome tweeters in these speakers are coated with a carefully
selected special high polymer so that the tweeters perform their
function (i.e. lessening the inferiority of signal transmission) even
better. Playback in the high frequency range has a better quality
because of this.
SB-S500SB-C500SB-LV500
SB-S500
C
B
SB-C500
A
Center focus function
The center speaker (SB-C500) has a center focus function. This
function takes advantage of the relationship between the sense of
hearing and the psychological properties of hearing and sight. This
means that center channel sounds-for example actors voices-seem
to come from the TV screen, even if the speaker itself is on top of
the TV. Try it out with a movie.
: The actual sound
: How it seems to be coming
How to turn the center focus on
Use the switch on the back of the speaker to turn it on.
Turn it off when it is not needed.
Dipole surround
The surround speakers SB-S500 reproduce mid-to low frequency
signals from the front and mid-to high frequency signals from the
rear. With Technics specially developed mode, a dipole sound field
is created around mid range signals.
The sound from the surround speakers is more natural because it is
not aimed directly at the listener.
To get the best out of bass sounds, the low frequency sound range
is not split. Tweeters are fitted to the rear to deal with sources that
need conspicuous orientation (e.g. AC-3).
: Dipole sound field
LOW: Low frequency sound
MID: Mid frequency sound
HIGH: High freqency sound
SPL: Sound Presure Level
High quality dome tweeter
The dome tweeters in these speakers are coated with a carefully
selected special high polymer so that the tweeters perform their
function (i.e. lessening the inferiority of signal transmission) even
better. Playback in the high frequency range has a better quality
because of this.
SB-S500SB-C500SB-LV500
SB-S500
C
B
SB-C500
A
Page is loading ...
27
POLSKI
C
ˇ
ESKY
Otaczaja˛cy zestaw gl⁄ os´nikowy (prawy)
Prostorová reprosoustava (pravá)
Otaczaja˛cy zestaw gl⁄ os´nikowy (lewy)
Prostorová reprosoustava (levá)
The diagram above shows the basic positioning of each speaker.
Front speakers
Position these speakers on either side of the TV facing toward the
listening position.
The sound reproduced by a speaker system is easily influenced by
such factors as room acoustics and the system’s location in the
room. Before finally deciding where the speakers are to be placed,
please read the following information carefully.
The bass sound will be increased if the speakers are placed on
the floor or close to a wall due to the reflection of sound. It is
therefore possible to adjust the bass sound to some extent by
adjusting the speaker’s distance from the wall and floor.
Undesirable resonance occurs if the speakers face a hard wall or
window. Curtains or similar materials can be used to prevent
these reflections.
To prevent possible acoustic feedback, the speaker systems
should be kept away from the turntable. This feedback (howling)
can result from vibrations from the speakers. The turntable
should, therefore never be placed on the same surface as the
speaker system. A thick piece of felt or similar material can be
used under the turntable to reduce this problem. Closing the
turntable’s cover also reduces this problem.
Center speaker
Set either on top or underneath the TV.
Surround speakers
Attach the speaker to the wall at a position which is at ear level and
slightly behind the listening point.
If the speaker cannot be attached to the wall, it can alternatively be
placed on top of a shelf or on the floor.
(
a
See page 8.)
To enjoy natural sound effects, ensure that the speakers are
connected to their respective terminals. The speakers are marked
on the rear so that it is easy to identify the left and right side and the
direction they should be faced.
Note
SB-S500
SB-C500
SB-LV500
The diagram above shows the basic positioning of each speaker.
Front speakers
Position these speakers on either side of the TV facing toward the
listening position.
The sound reproduced by a speaker system is easily influenced by
such factors as room acoustics and the system’s location in the
room. Before finally deciding where the speakers are to be placed,
please read the following information carefully.
The bass sound will be increased if the speakers are placed on
the floor or close to a wall due to the reflection of sound. It is
therefore possible to adjust the bass sound to some extent by
adjusting the speaker’s distance from the wall and floor.
Undesirable resonance occurs if the speakers face a hard wall or
window. Curtains or similar materials can be used to prevent
these reflections.
To prevent possible acoustic feedback, the speaker systems
should be kept away from the turntable. This feedback (howling)
can result from vibrations from the speakers. The turntable
should, therefore never be placed on the same surface as the
speaker system. A thick piece of felt or similar material can be
used under the turntable to reduce this problem. Closing the
turntable’s cover also reduces this problem.
Center speaker
Set either on top or underneath the TV.
Surround speakers
Attach the speaker to the wall at a position which is at ear level and
slightly behind the listening point.
If the speaker cannot be attached to the wall, it can alternatively be
placed on top of a shelf or on the floor.
(
a
See page 8.)
To enjoy natural sound effects, ensure that the speakers are
connected to their respective terminals. The speakers are marked
on the rear so that it is easy to identify the left and right side and the
direction they should be faced.
Note
SB-S500
SB-C500
SB-LV500
a
a
Page is loading ...
29
POLSKI
C
ˇ
ESKY
B
Installation on a wall
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isn’t. Consult with your Technics
dealer before installation.
1 Attach the metal wall mount (included).
2 Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3 Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
To prevent damage to the speakers, lay them on top of a soft
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
topple.
Note
SB-S500SB-C500SB-LV500
B
Note
SB-S500SB-LV500
A
Installation on a wall
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isn’t. Consult with your Technics
dealer before installation.
1 Attach the metal wall mount (included).
2 Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3 Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
To prevent damage to the speakers, lay them on top of a soft
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
topple.
Note
SB-S500SB-C500SB-LV500
B
Note
SB-S500SB-LV500
A
ç Ô˚Ú‡ÈÚÂÒ¸ ÔpÓËÁ‚ÂÒÚË Ì‡ÒÚÂÌÌÛ˛ ÛÒÚ‡ÌÓ‚ÍÛ ‰Ë̇ÏËÍÓ‚
͇ÍËÏÎË·Ó ËÌ˚Ï ÒÔÓÒÓ·ÓÏ, ÍpÓÏ ÓÔËÒ‡ÌÌÓ„Ó ‚ ‰‡ÌÌÓÈ
ËÌÒÚpÛ͈ËË.
ÇÌËχÌËÂ
Page is loading ...
31
POLSKI
C
ˇ
ESKY
A
15mm
123
Skre˛cone
Zkrut’te
Nie! NE!
B
Before making the connections, switch OFF the power to the
receiver (or amplifier).
Check the input impedance and output power of the receiver
before making any connections. (
a
See “Speaker impedance and
allowed output” on page 12.)
Be sure to connect only positive (+) wires to positive (+) terminals,
and negative (–) wires to negative (–) terminals.
Connection of speaker cables
To prevent damage to circuitry never short-circuit positive (+) and
negative (–) speaker wires.
If using a commercially available 4-mm plug cable
Fully tighten the speaker terminal nut, and then insert the end of the
plug cable into the top of the nut.
B
Note
A
Note
When these speakers are connected to a receiver in order to
enjoy the Dolby Pro Logic System, be sure to set the center
mode on the receiver to the “NORMAL” setting.
SB-S500SB-C500
Before making the connections, switch OFF the power to the
receiver (or amplifier).
Check the input impedance and output power of the receiver
before making any connections. (
a
See “Speaker impedance and
allowed output” on page 12.)
Be sure to connect only positive (+) wires to positive (+) terminals,
and negative (–) wires to negative (–) terminals.
Connection of speaker cables
To prevent damage to circuitry never short-circuit positive (+) and
negative (–) speaker wires.
If using a commercially available 4-mm plug cable
Fully tighten the speaker terminal nut, and then insert the end of the
plug cable into the top of the nut.
B
Note
A
Note
When these speakers are connected to a receiver in order to
enjoy the Dolby Pro Logic System, be sure to set the center
mode on the receiver to the “NORMAL” setting.
SB-S500SB-C500
a
a
Page is loading ...
Page is loading ...
34
Note:
Specifications are subject to change
without notice.
Weight and dimensions are
approximate.
Type 2 way, 3 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
75 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Dimensions (W H D)
110 450 174.5 mm
Weight 3.4 kg
Type 3 way, 4 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Tweeter (for center focus system)
6.5 cm cone type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
75 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Frequency response of 6.5 cm
tweeter 3 kHz–12 kHz (at –10 dB)
Dimensions (W H D)
450 127.5 174.5 mm
Weight 3.7 kg
Type 2 way, 3 speaker system
Closed type
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
79 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
125 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Dimensions (W H D)
218 260 110 mm
Weight 2.6 kg
Surround speakers SB-S500
Center speaker SB-C500
Front speaker SB-LV500
Nota:
Las especificaciones están sujetas a
cambio sin previo aviso.
El peso y las dimensiones son
aproximados.
Tipo 2 vías, sistema de 3 altavoces
Bass-reflex (reflejo de graves)
Altavoz
Altavoz de graves
8 cm tipo de cono 2
Altavoz de agudos
2,5 cm tipo de domo
Impedancia 8 Ω
Potencia de entrada
200 W (Musicales)/100 W (DIN)
Nivel de presión de sonido
81 dB/W (1,0m)
Frecuencia de cruce 2,5 kHz
Respuesta de frecuencia
75 Hz–40 kHz (a –16 dB)
80 Hz–36 kHz (a –10 dB)
Dimensiones (An. Al. Prof.)
110 450 174,5 mm
Peso 3,4 kg
Tipo 3 vías, sistema de 4 altavoces
Bass-reflex (reflejo de graves)
Altavoz
Altavoz de graves
8 cm tipo de cono 2
Altavoz de agudos
2,5 cm tipo de domo
Altavoz de agudos
(para sistema de foco central)
6,5 cm tipo de cono
Impedancia 8 Ω
Potencia de entrada
200 W(Musicales)/100 W (DIN)
Nivel de presión de sonido
81 dB/W (1,0m)
Frecuencia de cruce 2,5 kHz
Respuesta de frecuencia
75 Hz–40 kHz (a –16 dB)
80 Hz–36 kHz (a –10 dB)
Respuesta de frecuencia de altavoz
de agudos de 6,5 cm
3 kHz–12 kHz (a –10 dB)
Dimensiones (An. Al. Prof.)
450 127,5 174,5 mm
Peso 3,7 kg
Tipo 2 vías, sistema de 3 altavoces
Tipo cerrado
Altavoz
Altavoz de graves
8 cm tipo de cono 2
Altavoz de agudos
2,5 cm tipo de domo
Impedancia 8 Ω
Potencia de entrada
200 W (Musicales)/100 W (DIN)
Nivel de presión de sonido
79 dB/W (1,0m)
Frecuencia de cruce 2,5 kHz
Respuesta de frecuencia
125 Hz–40 kHz (a –16 dB)
80 Hz–36 kHz (a –10 dB)
Dimensiones (An. Al. Prof.)
218 260 110 mm
Peso 2,6 kg
Altavoces surround SB-S500
Altavoz central SB-C500
Altavoz delantero SB-LV500
Remarque:
Les données techniques sont
soumises à changement sans préavis.
Le poids et les dimensions sont
approximatifs.
Type Enceinte à 2 voies,
3 haut-parleurs Basse-réflex
Haut-parleurs
Woofer Type cône de 8 cm 2
Tweeter Type dôme de 2,5 cm
Impédance 8 Ω
Puissance d’entrée
200 W (musicale)/100 W (DIN)
Niveau de pression sonore
81 dB/W (1,0 m)
Fréquence de raccordement
2,5 kHz
Réponse de fréquence
75 Hz–40 kHz (à –16 dB)
80 Hz–36 kHz (à –10 dB)
Dimensions (L H P)
110 450 174,5 mm
Poids 3,4 kg
Type Enceinte à 3 voies,
4 haut-parleurs Basse-réflex
Haut-parleurs
Woofer Type cône de 8 cm 2
Tweeter Type dôme de 2,5 cm
Tweeter (pour le système de
mise au point centrale)
Type cône de 6,5 cm
Impédance 8 Ω
Puissance d’entrée
200 W (musicale)/100 W (DIN)
Niveau de pression sonore
81 dB/W (1,0 m)
Fréquence de raccordement
2,5 kHz
Réponse de fréquence
75 Hz–40 kHz (à –16 dB)
80 Hz–36 kHz (à –10 dB)
Fréquence de réponse du tweeter
de 6,5 cm
3 kHz–12 kHz (à –10 dB)
Dimensions (L H P)
450 127,5 174,5 mm
Poids 3,7 kg
Type Enceinte à 2 voies,
3 haut-parleurs type fermé
Haut-parleurs
Woofer Type cône de 8 cm 2
Tweeter Type dôme de 2,5 cm
Impédance 8 Ω
Puissance d’entrée
200 W (musicale)/100 W (DIN)
Niveau de pression sonore
79 dB/W (1,0 m)
Fréquence de raccordement
2,5 kHz
Réponse de fréquence
125 Hz–40 kHz (à –16 dB)
80 Hz–36 kHz (à –10 dB)
Dimensions (L H P)
218 260 110 mm
Poids 2,6 kg
Enceintes ambiophoniques
SB-S500
Enceinte centrale SB-C500
Enceinte avant SB-LV500
Technical
specifications
Especificacion es
técnicas
Données
techniques
Anm:
Rätten till ändringar förbehålles utan
föregående meddelande.
Mått och vikt bör betraktas som
ungefärliga.
Typ 2-vägs system med
3 högtalare Basreflex
Högtalare
Baselement 8 cm, kontyp 2
Diskantelement 2,5 cm, domtyp
Impedans 8 Ω
Ineffekt 200 W (musik)/100 W (DIN)
Ljudtrycksnivå 81 dB/W (1,0 m)
Övergångsfrekvens 2,5 kHz
Frekvensomfång
75 Hz–40 kHz (vid –16 dB)
80 Hz–36 kHz (vid –10 dB)
Mått (B H D)
110 450 174,5 mm
Vikt 3,4 kg
Typ 3-vägs system med
4 högtalare Basreflex
Högtalare
Baselement 8 cm, kontyp 2
Diskantelement 2,5 cm, domtyp
Diskantelement
(för mittfokussystem)
6,5 cm, kontyp
Impedans 8 Ω
Ineffekt 200 W (musik)/100 W (DIN)
Ljudtrycksnivå 81 dB/W (1,0 m)
Övergångsfrekvens 2,5 kHz
Frekvensomfång
75 Hz–40 kHz (vid –16 dB)
80 Hz–36 kHz (vid –10 dB)
Frekvensomfång för 6,5 cm
diskantelement
3 kHz–12 kHz (vid –10 dB)
Mått (B H D)
450 127,5 174,5 mm
Vikt 3,7 kg
Typ 2-vägs system med
3 högtalare Stängd typ
Högtalare
Baselement 8 cm, kontyp 2
Diskantelement 2,5 cm, domtyp
Impedans 8 Ω
Ineffekt 200 W (musik)/100 W (DIN)
Ljudtrycksnivå 79 dB/W (1,0 m)
Övergångsfrekvens 2,5 kHz
Frekvensomfång
125 Hz–40 kHz (vid –16 dB)
80 Hz–36 kHz (vid –10 dB)
Mått (B H D) 218 260 110 mm
Vikt 2,6 kg
Surroundhögtalare SB-S500
Mitthögtalare SB-C500
Framhögtalare SB-LV500
Tekniska data
Page is loading ...
Uwaga:
Dane techniczne moga˛ zostac´
zmienione bez uprzedzenia.
Waga i wymiary sa˛ przybliz˙ one.
Typ 2-droz˙ne, 3-gl⁄ os´nikowe,
system Bass-reflex
Gl⁄os´niki
Niskotonowy 8 cm, stoz˙ kowy 2
Wysokotonowy 2,5 cm, kopul⁄ owy
Impedancja 8 Ω
Moc wejs´ciowa
200 W (muzyczna)/100 W (DIN)
Poziom cis´nienia akustycznego
81 dB/W (1,0 m)
Cze˛stotliwos´c´ podzial⁄ u 2,5 kHz
Zakres przenoszonych
cze˛stotliwos´ci
75 Hz–40 kHz (–16 dB)
80 Hz–36 kHz (–10 dB)
Wymiary (Szer. wys. dl⁄ug.)
110 450 174,5 mm
Waga 3,4 kg
Typ 3-droz˙ne, 4-gl⁄ os´nikowe,
system Bass-reflex
Gl⁄os´niki
Niskotonowy 8 cm, stoz˙ kowy 2
Wysokotonowy 2,5 cm, kopul⁄ owy
Wysokotonowy (dla funkcji
centralnego nastawienia)
6,5 cm, kopul⁄ owy
Impedancja 8 Ω
Moc wejs´ciowa
200 W (muzyczna)/100 W (DIN)
Poziom cis´nienia akustycznego
81 dB/W (1,0 m)
Cze˛stotliwos´c´ podzial⁄ u 2,5 kHz
Zakres przenoszonych
cze˛stotliwos´ci
75 Hz–40 kHz (–16 dB)
80 Hz–36 kHz (–10 dB)
Zakres przenoszonych
cze˛stotliwos´ ci 6,5 cm gl⁄ os´ nika
wysokotonowego
3 kHz–12 kHz (–10 dB)
Wymiary (Szer. wys. dl⁄ug.)
450 127,5 174,5 mm
Waga 3,7 kg
Typ 2-droz˙ne, 3-gl⁄ os´nikowe,
system Typ zamknie˛ty
Gl⁄os´niki
Niskotonowy 8 cm, stoz˙ kowy 2
Wysokotonowy 2,5 cm, kopul⁄ owy
Impedancja 8 Ω
Moc wejs´ciowa
200 W (muzyczna)/100 W (DIN)
Poziom cis´nienia akustycznego
79 dB/W (1,0 m)
Cze˛stotliwos´c´ podzial⁄ u 2,5 kHz
Zakres przenoszonych
cze˛stotliwos´ci
125 Hz–40 kHz (–16 dB)
80 Hz–36 kHz (–10 dB)
Wymiary (Szer. wys. dl⁄ug.)
218 260 110 mm
Waga 2,6 kg
Otaczaja˛cy zestaw gl⁄os´nikowy
(SB-S500)
Centralny zestaw
gl⁄os´nikowy (SB-C500)
Przedni zestaw gós´nikowy
(SB-LV500)
Dane
techniczne
Poznámka:
Technické údaje podléhají zmeˇnám
bez upozorneˇní.
Uvedená hmotnost a rozmeˇ ry jsou
pouze prˇiblizˇné.
Typ dvoupásmovy´ , trˇíreproduktorovy´
systém, bassreflex
Reproduktor
Basovy´ 8 cm kónicky´ 2 ks
Vy´sˇkovy´
2,5 cm s vrchlíkovou membránou
Impedance 8 Ω
Prˇíkon 200 W (hudba)/100 W (DIN)
Hladina akustického tlaku
81 dB/W (1,0 m)
Kmitocˇtovy´ prˇesah 2,5 kHz
Kmitocˇtovy´ rozsah
75 Hz–40 kHz (prˇi –16 dB)
80 Hz–36 kHz (prˇi –10 dB)
Rozmeˇry (S
ˇ
V H)
110 450 174,5 mm
Hmotnost 3,4 kg
Typ trˇípásmovy´, cˇtyrˇreproduktorovy´
systém, bassreflex
Reproduktor
Basovy´ 8 cm kónicky´ 2 ks
Vy´sˇkovy´
2,5 cm s vrchlíkovou membránou
Vy´sˇkovy´ (pro centrování zvuku)
6,5 cm kónicky´
Impedance 8 Ω
Prˇíkon 200 W (hudba)/100 W (DIN)
Hladina akustického tlaku
81 dB/W (1,0 m)
Kmitocˇtovy´ prˇesah 2,5 kHz
Kmitocˇtovy´ rozsah
75 Hz–40 kHz (prˇi –16 dB)
80 Hz–36 kHz (prˇi –10 dB)
Kmitocˇtovy´ rozsah 6,5 cm
vy´sˇkového reproduktoru
3 kHz–12 kHz (prˇi –10 dB)
Rozmeˇry (S
ˇ
V H)
450 127,5 174,5 mm
Hmotnost 3,7 kg
Typ dvoupásmovy´, trˇíreproduktorovy´
systém, uzavrˇeny´ typ
Reproduktor
Basovy´ 8 cm kónicky´ 2 ks
Vy´sˇkovy´
2,5 cm s vrchlíkovou membránou
Impedance 8 Ω
Prˇíkon 200 W (hudba)/100 W (DIN)
Hladina akustického tlaku
79 dB/W (1,0 m)
Kmitocˇtovy´ prˇesah 2,5 kHz
Kmitocˇtovy´ rozsah
125 Hz–40 kHz (prˇi –16 dB)
80 Hz–36 kHz (prˇi –10 dB)
Rozmeˇry (S
ˇ
V H)
218 260 110 mm
Hmotnost 2,6 kg
C
ˇ
elní reprosoustava
(SB-S500)
Centrální reprosoustava
(SB-C500)
C
ˇ
elní reprosoustava
(SB-LV500)
Technické
údaje
Note:
Specifications are subject to change
without notice.
Weight and dimensions are
approximate.
Type 2 way, 3 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
75 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Dimensions (W H D)
110 450 174.5 mm
Weight 3.4 kg
Type 3 way, 4 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Tweeter (for center focus system)
6.5 cm cone type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
75 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Frequency response of 6.5 cm
tweeter 3 kHz–12 kHz (at –10 dB)
Dimensions (W H D)
450 127.5 174.5 mm
Weight 3.7 kg
Type 2 way, 3 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
79 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
125 Hz–40 kHz (at –16 dB)
Surround speakers SB-S500
Center speaker SB-C500
Front speaker SB-LV500
Note:
Specifications are subject to change
without notice.
Weight and dimensions are
approximate.
Type 2 way, 3 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
75 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Dimensions (W H D)
110 450 174.5 mm
Weight 3.4 kg
Type 3 way, 4 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Tweeter (for center focus system)
6.5 cm cone type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
75 Hz–40 kHz (at –16 dB)
80 Hz–36 kHz (at –10 dB)
Frequency response of 6.5 cm
tweeter 3 kHz–12 kHz (at –10 dB)
Dimensions (W H D)
450 127.5 174.5 mm
Weight 3.7 kg
Type 2 way, 3 speaker system
Bass-reflex
Speaker
Woofer 8 cm cone type 2
Tweeter 2.5 cm dome type
Impedance 8 Ω
Input power
200 W (Music)/100 W (DIN)
Sound pressure level
79 dB/W (1.0 m)
Crossover frequency 2.5 kHz
Frequency response
125 Hz–40 kHz (at –16 dB)
Surround speakers SB-S500
Center speaker SB-C500
Front speaker SB-LV500
Matsushita Electric Industrial Co.,Ltd.
Osaka 542-8588, Japan
RQT4517-3E
H1297G3098
Ge ItSwFrSpEn Ru ChCzPoDaDu
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: Technics SB-C500 Manuale del proprietario
- français: Technics SB-C500 Le manuel du propriétaire
- español: Technics SB-C500 El manual del propietario
- Deutsch: Technics SB-C500 Bedienungsanleitung
- Nederlands: Technics SB-C500 de handleiding
- dansk: Technics SB-C500 Brugervejledning
- polski: Technics SB-C500 Instrukcja obsługi
- čeština: Technics SB-C500 Návod k obsluze
- svenska: Technics SB-C500 Bruksanvisning
Related papers
-
Technics SB-LV500 Owner's manual
-
Panasonic SBHT140 Operating instructions
-
-
-
-
-
-
-
-
Other documents
-
-
Optimus BS-60BP User manual
-
JVC SX-L3WD User manual
-
-
-
Hama 00014460 Owner's manual
-
Compaq Presario SR1000 - Desktop PC Important Safety Instructions
-
Mirage AVS-100 User manual
-
-
Sony SS-F7000 User manual