WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MO]ISTURE.
CAUTION
CA[JTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS INSIDE. REFER SER.
V[C [NG TO Q1JALtF[ED SERVICE PERSONNEL.
The important note is located on the ]'ear of the cabinet.
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRE-
SENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
IMPORTANT SAFEGUARDS
I. Read inslluctions-All tile salely and operaling instiuc-
lions should be read beRue the appliance is opeiated.
2. Retain Instiucdons-The salety and opeiating instruc-
lions should be retained RII fllture relhmnce.
3. Heed Wainfllgs-All warnings on the appliance and ill
the operaling instructions should be adhered to.
4. Follow hlstluctions-All operating and use instiuctions
shouM be Iollowed.
5. Cleanfllg-Unplug TV flom the wall oullel beloie clean-
ing. Do nol use liquid cleaneis or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product ihal is meant tor uninierrul)l-
ed sel_,ice and, lhal RII solne specilic reason, such as
file possibilily of file loss of an auflloIizafion code 1oI a
CATV collveile/, is nol inlended to be unplugged by
lhe user lot cleaning or any othei purpose, may
exclude the relerence lo unplugging file appliance in
file cleaning descriplion otherwise requiied in item 5.
b. Attachlnenls-Do not use attachments not recommended
by lhe TV nmnulacmier as they nmy cause lmzards.
7. Watei and Moismie-Do not use this TV near watei, lor
example, near a bath rob, wash bowl, kitchen sink. or
laundl} rob. in a wet basement, or near a swfinnfing
pool, and the like.
8. Accessoiies-Do not place this TV on an unstable cart.
stand, tripod, biackel, or table. The TV may tall, caus-
ing serious illjlliy to someone, and serious damage to
file appliance. Use only wflll a call, stand, liipod,
brackel, or lable recon/mended by tile II/anllldcturei, or
soM with tile TV.
Ally mounling of lhe appliance shouM Iollow lhe man-
ulactuier's instructions and should
use a mounting accessoiy recom- PORTABLECARTWARNING
mended by the Inanu|dclurei. An
appliance and cart combination
shoukl be moved wilh cam. Quick
stops, excessive R_ice. and uneven
sudaces may cause file appliance
and cart combinalion to ovelttlrn.
AMEUBLES- Cel appareil ne doll £_lie placd que sui till
nleuble (avec ou sans rouleltes) recomlnalld_ pai le
labricanl. Si vous l'installez sui
un meuble h i'oldettes, ddplacez SYMBOtrDaVgI_nSSVM_pOOnLESCOM_OS_Nr_S
APPAREIL _ MEUSLE A ROUL_TgS
]es deux ensenlbles avec pr_cau-
(ion. UII arrg21 brusque, l'utilisation
(Pune force excessive el des SLIr-
laces irr_guli&ies iisquenl de
d_Tslabiliser Fensemble el de le
renversei.
9. Venlilalion-Slots and openings ill lhe cabinel and lhe
back oi bonoln are provided lor ventilalion and to
ensuie ieliable opeiation ol lhe TV and lo piotecl il
Irom overheating, lllese openings lnusl ilOt be blocked
oi covmed. The openings should never be blocked by
placing lhe TV on a bed, sofa. lug, or other similar sui-
lace. This TV shouM nevei be phtced near oi ovei a
iadiator oi heat register. This TV should nol be placed
ill a btdll-ill inslallalion such as a bookcase or iack
unless propei venlilalion is provided or file manufac-
lllier's instiuctions have been adheied to .
I0. Power Sources-This TV shoukl be opeiated only irom
tile lype ol powei source indicaled on tile maiking
label. II you are not sure le vpe o p we- s pp y o
youi home, COllsult your appliance dealer oi local
power company. For TVs inlended to operate horn bal-
lely power, oi othei SOtlrces. re|er 1o file operaling
insli ucliOllS+
I I. Grounding or Polarizalion-This TV is equipped wilh a
polarized allenmling-currenl line i)lug(a plug having
one blade wklei lhan lhe olher). This plug _ill fil inlo
tile power oullei only one way. This is a salely feature.
If you are unable to inserl tile plug lully into tile outlet,
liT reversing file plug. If lhe plug shoukl still fail lo fil.
conlacl your electiician tO replace your obsolete outlet.
Do not del)at file sal)ly purpose ol file polarized plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
N£C. NATIONAL ELECTRICAL CODE
$2898A
LEAD iN
WIRE
DISCNARGE UNIT
(NEC SECTION 810-20)
(NEC SECTION 810-21)
GROUNDOLAMPS
ELECTRODE SYSTEM
(NEC ART 250 PART H)
12. Powei-Cord Proteclion-Powei-supply cords should be
iouled so lhal lhey aie nol likely to be walked on or
pillched by items placed upon or againsl them, paying
parlicular altenlion 1ocoids at plugs, convenience
receplacles, and the poinl where lhey exil flora lhe
appliance.
13. OutdooI Antenna grounding-lf all outside anlellna or
cable syslenl is connected to lhe TV. be suie lhe anten-
na oi cable systenl is grounded so as tO provide some
proleclion againsl voltage surges and built-up stalic
chalges. Aiticle 810 of lhe National Electrical Code,
ANS[/NFPA No. 70, provides inlornmBon with iespect
lo proper grounding of lhe nlast and suppoi_ing slruc-
lure. grouIlding of tile lead-in wire to ml anlelllla dis-
charge unit, size of grounding conduclols, location of
antenna-discharge uniL connection lo gioundfllg dec-
hodes, and requirenlents Ior the groundfllg electrode.
(Fig. A)
14. Lighming-For added protection lot lhis TV ieceivei
duiing a lighming slorm, oi when il is left unatlended
and unused Ior long periods of time, unplug it flonl lhe
wall oullet and disconnect lhe anlenna or cable system.
This will prevent damage to the TV due to lighming
and power-line suiges.
15. Powei Lines-An oulside antenna system should nol be
located in file vicinity of overhead power lines or olhei
electric light of power circuits, oi wheie it can flail into
sucll powei lines or ciicuits. When installing an oulside
antenna system, extieme care should be taken to keep
liom touching such power lines or cilvuits as COlllacl
with them might be latah
16. Overloading-Do not oveiIoad wall outlets and extension
cords as this can result ill a risk of fire oi electric shock.
17. Object and Liquid Entry-Nevm push objects of any
kind into this TV tluough openings as they may touch
dangeious voltage points or sholl out parts that could
result in a fire oI electric shock. Never spill liquid of
ally kind on the TV.
18. Seiwicing-Do not altempt to service this TV yourself as
opening or relnoving cover_ lnay expose you to dan-
gerous voltage oi olhei hazards. Relei all servicing lo
qualified sel_ice personnel.
19. Damage Requiring Seivice-Unplug lilts TV liom file
wall omlel and ieler sel_icing lo qualified seivice pei-
sonnel ullder lhe lollowing Colldilions:
a. When tile powei supply cord oI plug is damaged or
flayed.
b. ff liquid has been spilled, ot objects have Iallen into
the TV.
c. [f lhe TV has been exposed to lain or water.
d. [f the TV does not operate nommlly by Iollowing the
operating instluctions. Adjust only those controls that
am coveted by the operating instructions, as improper
adjustment of othm controls may result in danmge and
will often require extensive work by a qualified techni-
cian to restore the TV to its normal operalion.
e. [f the TV has been dropped or danlaged in any way.
f. When the TV exhibits a distfllct change in pedot-
mance-ihis indicates a need tot smvice.
20. Replacement Patts-When replacement palls am
requited, be sure the senice technician uses teplace-
nlenl pai_s specified by the manulacturei that have the
sanle chatacleristics as the original pall. Unaulhotized
substitutions may iesult in fire. electric shock, injuo' to
persons o1olhei hazards.
21. Safety Check-Upon conlpletkm of any service ot
tepaits to this TV. ask the smvice technician to pedorni
routine salely checks to delermine that lhe TV is in
proper operating conddion.
22. Heal-This TV product should be situated away flom
Ileal sources such as radialols, heal registers, stoves, or
olhei producls (includillg anlplifieis) thal produce heal.
OPERATING CONTROLS AND FUNCTIONS
- FRONT PANEL - - REAR PANEL -
1 2 3 4
o co®©
5 6 7 8 9
47
1 2 3 16
- REMOTE CONTROL -
IItNI i II itilFil I Ihll aU I I_[I] I] D!
1. VIDEO (IN) jack- Connect to the video
output ,jack of a video cameFa or VCR.
NOTE: Tire AUDIO and VIDEO ,jacks on
tire front panel are given priority over those
on the Fear panel. Suppose that the connec-
tions aFe ah'eady made with the 1ear-panel
,jacks and additioually with the fFont-panel
,jacks. In this case too, the input via tire
fi'ont ones is automatically selected.
2. AUDIO L (IN) jack- Connect to the lef_
channel audio output ,jack of a video cam-
era or VCR.
NOTE: The rear-panel AUDIO L (IN) ,jack
is for mono input. Tire sound is heaFd from
both speakers. Use this jack for monaural
audio equipmeut to be hooked up.
3. AUDIO R (IN) jack- Conuect to the right
chaunel audio output ,jack of a video cam-
era OFVCR.
4. HEADPHONE jack- TMconuect headphone
(not supplied) toFpeFsonallistening.
5. MENU button- Press to display the meuu
on the TV scFeen.
6. VOLUME (VOL) A/• bnttons- Press to
contFol the volmne level.
Press to determine the setting mode E_m the
menu on the TV sc_eeu. (only the VOL •
button)
Press to select OFadjust from a particulaF
menu. (foFexample: Language Selection,
Channel Presetting, Closed Caption Selection,
PictureA_liustmeut, V-CHIP Set Up)
7. CHANNEL (CH) •/• buttons- PFeSSto
select memorized channel.
NOTE:You MUST PRESET channels
BEFORE rising CHANNEL •/• buttons.
(See CHANNEL PRESETTING)
Press to select the setting mode fi'om the
menu on the TV screen.
Press to select item you want to adjust in
the pictuFe control mode.
8. POWER button- Press to tuFnthe TV ON
and OFE
9. Infrared Sensor Window- Receives the
infrared control signals from the Femote
contFol uuit.
10.MUTE button- Press the MUTE button to
turn off the soculd portion of the TV pro-
gFam. (Volume level display turns LIGHT
RED fFom LIGHT BLUE.) PFeSSthe
MUTE button again or press the VOL(ume)
• or • button to restore souud.
II .CHANNEL RETURN button- PFeSSthis
button to go back to the previously viewed
channel. For example, pFessing the CHAN-
NEL RETURN button once will change
channel display from CH 3 (preseut chan-
nel) to CH 10 (previously viewed channel),
and pressiug it a second time will retuFn
fl'om CH lO to CH 3.
12.DISPLAY button- PFeSSto display the
channel number on the screen. If you press
it again, the channel number wiii disappear.
13.SLEEP bniion- Press the SLEEP button to
display the sleep tflner and start the func-
tiou. The shut off trine can be deteFmined
by the number of times you press the but-
ton. (0, 10, 20, 30,..90, 0 miuutes)
14.GAME bniton- Press to set the Game
mode aud exteFnal input mode at the same
time. Press the GAME button agaiu to exit
this mode.
15.CHANNEL NUMBER bntions- PFeSStwo
digits to directly access the desiFed channel.
Remember to press a "0" before a single
digit channel.
+100 buiion- Press to select cable channels
higher than 99.
16.ANT(enna). IN jack- Connect to au anten-
na, cable system, OFsatellite system.
17.AC cord- Connect to a standard AC outlet
(120V/60Hz).
NOTE: UnwFap the AC cord completely
fFom the backcoveF beii)Fe plugging the
cord into an AC outlet.
• i • . II !
1) Slide the battery compaFtment cover back
on the remote unit.
2) lnseFt 2 "AA" penlight batteries into battery
compaFtment iu the direction as indicated
by the polarity (+ / -) markings. Batteries
installed with incorFect polarity may dam-
age the remote unit.
3) Replace the cover.
When cising an external input signal (VCR OF
camcoFdeF), connect the playeF's audio/video
output cables to the AUDIO IN/VIDEO IN
,jacks of your TV. Then press the GAME but-
ton. For details, see "USING THE GAME
BUTTON" in PICTURE ADJUSTMENT sec-
tion.