GMC 2016 Sierra 1500 User guide

Brand: GMC

Model: 2016 Sierra 1500

Category: Cars

Type: User guide

This manual is also suitable for

Sierra 1500 2016

Review this Quick Reference Guide for an overview of some

important features in your GMC Sierra Denali. More detailed

information can be found in your Owner Manual. Some optional

equipment described in this guide may not be included in your

vehicle. For easy reference, keep this guide with your Owner

Manual in your glove box.

www.gmc.com

2016 Sierra Denali

Getting to Know Your

Audio Next/

Previous Favorite

Station Controls

(behind steering

wheel)

Cruise Control/

Collision Alert

Heated Steering

Wheel

Buttons

Power Mirror

Control/Door Lock

Switch/Window

Buttons

Audio

Volume

Controls

(behind

steering

wheel)

Voice

Recognition

Buttons/

Customizable

Driver Display

Controls

Tilt

Steering

Wheel

Lever

Telescoping

Steering

Wheel

Control

Memory

Seat

Controls

Instrument Panel

Illumination

Control/Exterior

Lamp Control

4WD

Control

Tow/Haul

Button

Customizable

Driver Display

Turn Signal/

Windshield

Wipers Lever

Integrated

Trailer Brake

Control

Instrument Panel

Low Fuel

Traction Control Off

Engine Coolant

Temperature

Brake System

Cruise Control Set

Forward Collision Alert

StabiliTrak Active

StabiliTrak Off

Security

Tow/Haul Mode

Hill Descent Control

Lights On Reminder

Airbag Readiness

Check Engine

Symbols

Refer to your Owner Manual to

learn about the information being

relayed by the lights, gauges and

indicators on the instrument cluster.

See In Brief in your Owner Manual.

Driver’s Heated/

Vented Seat

Buttons

Infotainment

System Touch

Screen

Passenger’s

Heated/Vented

Seat Buttons

Climate

Controls

Accessory

Power

Outlets

Adjustable Pedals Switch/

Traction Control and

StabiliTrak Button/Cargo Box

Lamp Button

110V

Outlet

USB

Ports

Antilock Brake System

Diesel Exhaust Brake

(diesel models only)

Low Tire Pressure

(single rear wheel

models only)

Door Ajar

Oil Pressure

Charging System

Safety Belt Reminder

Optional equipment

Front and Rear Parking Assist

Lane Keep Assist

(LD models)/Lane

Departure Warning

(HD models)/

Hill Descent Control

/Diesel Exhaust

Brake (if equipped) Buttons

Note: Diesel model shown.

Remote Keyless Entry Transmitter (Key Fob)

Door Locks

Power Mirrors

Door Locks

To lock or unlock all doors, press the power door Lock/ Unlock button, located on

the front doors.

Note: To change the lock and unlock settings, go to Power Door Locks in the Vehicle Settings menu.

To open a locked door from inside, pull the inside door handle to unlock the door and

then pull the door handle again to open the door.

Locking Tailgate

To lock or unlock the tailgate, use the door key or the key fob.

See Keys, Doors and Windows in your Owner Manual.

Power Mirror Adjustment

Press the Power Mirror Selector switch to select the driver’s or passenger’s mirror;

use the four-way control to adjust the mirror.

Power Folding Mirror

Press the Power Folding Mirror button to fold or unfold the mirrors.

See Keys, Doors and Windows in your Owner Manual.

Unlock

Press to unlock the

driver’s door. Press

again to unlock all

doors and tailgate.

Press and hold to

lower all windows.

Lock

Press to lock all doors

and tailgate.

Vehicle Locator/Panic Alarm

Press and release to locate your vehicle.

The turn signal lamps will ash and the

horn will sound.

Press and hold to activate the alarm. The

turn signal lamps will ash and the horn

will sound until the button is pressed

again or the ignition is turned on.

Note: To change the remote lock, unlock, and

remote start settings, go to Remote Lock, Unlock,

Start in the Vehicle Settings menu.

Remote Vehicle Start

Press and release the Lock button and

then press and hold the button until

the turn signal lamps ash to start the

engine from outside the vehicle. After

entering the vehicle, turn on the ignition.

• During a remote start, the engine will

run for 10 minutes.

• Press and hold the

button until

the parking lamps turn off to cancel a

remote start.

Note: If the remote start heated/vented seat

option is selected, the heated/vented seat button

indicators do not illuminate and the temperature

performance of the unoccupied seat may be

reduced during the remote start. The heated/

vented seat turns off when the ignition is

turned on.

See Keys, Doors and Windows in your Owner Manual.

A. Seat Cushion Adjustment

Move the front horizontal control to

move the seat forward or rearward,

or to tilt, raise or lower the seat.

B. Seatback Adjustment

Move the vertical control to recline or

raise the seatback.

C. Lumbar Adjustment

Move the rear control to adjust the

lumbar support.

1. With the vehicle in Park, adjust the

driver’s seat, power outside mirrors

and adjustable pedals to the desired

positions.

2. Press and release the SET button and

then press and hold button 1 on the

driver’s door until two beeps sound.

3. Repeat the steps using button 2 for a

second driver.

Seat Adjustments

Set Memory Positions

Set Exit Position

1. Adjust the driver’s seat and adjustable pedals to the desired positions.

2. Press and release the SET button and then press and hold the Exit button on the

driver’s door until two beeps sound.

Recall Positions

With the vehicle in Park and the ignition on, press and release button 1 or 2 or the

Exit button to recall the stored position.

At any time, press and hold button 1 or 2 on the driver’s door until the stored position

is reached. Releasing the button before the stored position is reached cancels the

recall.

The memory/exit positions can be programmed to be recalled automatically when the

ignition is turned on/off (for exit recall, the driver’s door must be opened).

To set the Auto Memory Recall or Easy Exit Options, go to Settings > Vehicle > Comfort

and Convenience > Auto Memory Recall or Easy Exit Options.

See Seats and Restraints in your Owner Manual.

Power Seats

Head Restraints

To raise the head restraint, pull the head restraint up.

To lower the head restraint, press the button on top of the seatback and push the head

restraint down.

See Seats and Restraints in your Owner Manual.

Lighting

Automatic Headlamp System

Rotate the knob to activate the

exterior lights.

Off/On

AUTO Automatic Headlamp System

Automatically activates the Daytime

Running Lamps (DRLs) or the headlamps

and other exterior lamps depending on

outside light conditions.

Parking Lamps

Headlamps

Fog Lamps

Press to turn the fog lamps on or off.

Instrument Panel Brightness

Rotate the thumbwheel to adjust the

instrument panel lighting.

See Lighting in your Owner Manual.

Instrument Panel Lighting

Cargo Lamp

Cargo Box Lamp

With the vehicle in Park, press to turn

the cargo lamp and under-rail pickup box

lights on or off. The button indicator will

illuminate when the lights are on.

See Instruments and Controls in your Owner Manual.

With the vehicle in Park, pull the lever

(A) on the left side of the steering col-

umn to adjust the tilt position of the

steering wheel. The steering wheel can

then be moved up or down. Release the

lever to lock the steering wheel in place.

With the vehicle in Park, push down the

lever (B) closer to the instrument panel

on the left side of the steering column

to move the steering wheel in or out.

Pull up the lever to lock the steering

wheel in place.

See Instruments and Controls in your Owner Manual.

Tilt/Telescoping Steering Wheel

Customizable Driver Display

The Customizable Driver Display on the instrument cluster displays a variety of vehicle

system information and warning messages.

Menu Items

Use the control pad on the right side of the steering wheel to view the Info (includes the

trip odometers and fuel information), Audio, Phone, Navigation, and Settings menus.

Press the

button to move between the display zones.

Press the

or button to move through the menus.

Press to open a menu or select/deselect a setting.

Reset an Item

1. Use the control pad to display the item.

2. Press and hold to reset or clear the item.

Changing Display Themes

The Customizable Driver Display features three display themes: Standard, Technology,

and Media. The style of the display will change depending on the selected theme.

1. Use the control pad to display the Settings menu.

2. Select Display Theme.

3. Select the desired theme.

See Instruments and Controls in your Owner Manual.

Automatic Climate Controls

Automatic Operation

1. Press AUTO.

2. Set the temperature for the driver and front passenger. The system automatically

controls the fan speed, air delivery, air conditioning and recirculation to reach the set

temperature. Allow time for the system to reach the desired temperature.

If the air delivery mode or fan speed is manually adjusted, automatic operation is turned off.

Recirculation Mode

Press Recirculation Mode to quickly cool the air inside the vehicle or prevent

outside odors from entering the vehicle. Recirculation Mode is not available while the

Defog or Defrost Mode is selected.

Sync Temperature Settings

Press SYNC to link the passenger’s temperature setting to the driver’s setting. When

the passenger’s setting is adjusted, the different passenger’s temperature setting is

displayed.

See Climate Controls in your Owner Manual.

Driver’s

Temperature

Control

Defog

Mode

Defrost

Mode

Passenger’s

Temperature

Control

Fan Speed

Control/On/

Off

Vent

Mode

A/C

Air

Conditioning

Control

AUTO

Automatic

Operation

Driver’s

Heated/

Vented Seat

Buttons

Passenger’s

Heated/

Vented Seat

Buttons

Recirculation

Mode

Floor

Mode

SYNC

Link passenger’s

temperature

setting to driver’s

temperature

setting

Bi-level

Mode

REAR

Rear

Window/

Outside

Mirror

Defogger

Windshield Wipers

Audio Steering Wheel Controls

Rotate the band on the lever to activate

the wipers.

Fast Wipes

Slow Wipes

INT Intermittent

Adjust the delay between wipes. The

wipers activate more often as the band is

rotated upward.

OFF

Mist

Single wipe.

Washer Fluid

Push the paddle forward to spray washer

uid on the windshield.

See Instruments and Controls in your Owner Manual.

Push to Talk

Press to answer an incoming call or to use

natural voice recognition with the audio,

Bluetooth, navigation or OnStar

system.

End Call/Mute

Press to end or reject a call.

Press to mute/unmute the vehicle speakers.

Next/Previous

With the Audio screen displayed on the

DIC, press or

to seek the previous or

next radio station or track.

Volume

(behind right side of steering wheel)

Press the top or bottom button to adjust

the volume.

Next/Previous Favorite Station

(behind left side of steering wheel)

Press the top or bottom button to go to

the next or previous favorite radio station

or track.

See your Infotainment System Owner Manual.

Next/Previous Favorite Station button shown. Volume

button is located behind the right side of the steering

wheel.

GMC IntelliLink

BACK

Move back one

level in the

menus

Home

screen

Eject

disc

Power/

Volume

Additional Pages:

Touch to view

additional pages of

applications

(if available)

TUNE/MENU

Tune radio

stations/Open and

select menus

Interaction

Selector:

Touch to display

the favorites list

Applications:

Touch the screen

icon to access the

application

RADIO

Select AM,

FM, XM

MEDIA

Select the

media

source

SEEK

Previous/Next radio

station or track

Refer to your Owner Manual for important safety information about using the infotainment

system while driving.

The GMC IntelliLink System is controlled by using the audio system buttons, touch screen,

voice recognition and audio steering wheel controls.

Optional equipment

GMC IntelliLink uses a Bluetooth or USB connection to link a compatible device, such

as a smartphone, cell phone, USB ash drive or portable audio player/iPod

, and hands-free

voice control. For assistance with the IntelliLink system, contact Customer Assistance at

1-855-4-SUPPORT (1-855-478-7767) or visit www.gmc.com and click the More GMC tab.

See your Infotainment System Owner Manual.

GMC IntelliLink

Setting the Time

1. Touch Settings on the home page.

2. Touch Time and Date.

3. Touch Set Time.

4. Touch the arrows to adjust the hours, minutes

and AM or PM.

5. Touch BACK to exit the menu.

Storing Favorites

Up to 60 radio stations from all bands (AM, FM or SiriusXM

), media (song, artist, album,

and genre with device connected to a USB port), phone contacts and navigation destina-

tions can be stored in any order.

1. Select the desired radio station, media favorite, navigation destination or contact.

2. Touch and drag up the

Interaction Selector at the bottom of the screen to display

the favorite screen buttons.

3. Touch and hold one of the favorite screen buttons until a beep is heard, indicating it

is stored.

4. Repeat the steps to store another favorite item.

To change the number of favorites displayed, go to Radio in the Settings menu.

Managing Home Page Icons

1. Press the Home button.

2. To enter edit mode, touch and hold the home

page icon to move.

3. Continue holding the icon and drag it to the

desired position, and then release.

4. Press the Home button to exit edit mode.

Natural Voice Recognition

Control the music source and make phone calls hands-free (after pairing your Bluetooth-

enabled phone) using the natural voice recognition system.

1. Press the

Push to Talk button on the steering wheel.

2. The radio will say “Command please,” followed by a beep.

3. After the beep, say what you want it to do using natural speech.

(Example: “Call Amanda” or “Tune FM 104.3.” Say “Help” for assistance.)

PANDORA

Internet Radio

Listen to personalized radio stations based on favorite artists or genres.

Download the Pandora app to your smartphone and sign in to Pandora.

Create a station on your phone to listen to a customized song list in the vehicle.

Connect your smartphone by Bluetooth or, for Apple devices, by a USB cable.

Touch the Pandora icon on the touch screen to access Pandora. A slight delay may

occur when loading a song or changing a station.

See your Infotainment System Owner Manual.

Optional equipment

Apple CarPlay™ and Android Auto™

The Wireless Charging system is located on the storage tray on top of the center console.

To check mobile device compatibility, visit my.gmc.com/learn. See your phone retailer for

details on required phone accessories.

1. The vehicle must be on or Retained Accessory Power must be active.

2. Remove all objects from the charging pad.

3. Place the device, face up, on the

symbol on the pad, aligned with the rear rib.

4. Move the device slowly until the battery charging symbol displays on the infotainment

screen. If not charging, remove the device for 3 seconds, and rotate it 180 degrees.

See your Infotainment System Owner Manual.

Wireless Charging

Apple CarPlay or Android Auto

capability may be available through a compatible smart-

phone. If available, a

Projection icon will appear on the home page of the infotain-

ment display.

1. No app is required for Apple CarPlay. Download the Android Auto app to your phone

from the Google Play store.

2. Connect your Apple iPhone or Android phone by plugging the compatible phone USB

cable into a USB data port. Use your device’s factory-provided USB cable. Aftermarket

cables may not work.

3. The

Projection icon will change to Apple CarPlay or Android Auto, depending

on the phone. Apple CarPlay or Android Auto may launch automatically upon USB

connection. If not, touch the Apple CarPlay or Android Auto icon on the home page.

For more information on using Apple CarPlay or Android Auto, call 1-855-4-SUPPORT

(1-855-478-7767) or visit my.gmc.com/learn.

See your Infotainment System Owner Manual.

Optional equipment

Late availability

Bluetooth® System

Portable Audio Devices

Refer to your Owner Manual for important safety information about using the infotainment system

while driving.

Before using a Bluetooth-enabled device in the vehicle, it must be paired with the in-

vehicle Bluetooth system. The pairing process is disabled when the vehicle is moving.

Not all devices will support all functions. Bluetooth streaming audio is available with the

IntelliLink system. For more information, visit my.gmc.com/learn.

Pair a Phone

1. To use voice recognition, press the

Push to Talk button; after the beep, say

“Pair phone,” or

Use the MENU knob or the touch screen to

select the Phone icon > Phones > Pair Device.

2. Start the pairing process on the phone. Locate

GMC IntelliLink on the phone.

3. Enter the four-digit code that appears on the

touch screen into the phone or, if a six-digit

code appears on the phone, conrm it on the

touch screen.

4. If your phone prompts you to accept the

connection or phone book download, select Always Accept and Allow.

Streaming Audio

With a paired device connected via Bluetooth, press the MEDIA button until Bluetooth is

displayed on the touch screen to stream audio from the device. Control audio operation

using the device controls.

See your Infotainment System Owner Manual.

An accessory power outlet, dual USB ports and

auxiliary jack are located in the center console

storage compartment.

An iPod

, iPhone

, MP3 Player, a USB ash

drive or a USB mass storage device can be

connected to the USB port. GMC IntelliLink

will read the device and build a list of

songs. Search for music on-screen or by

voice commands.

Press the MEDIA button to select a portable

device as the audio source.

See your Infotainment System Owner Manual.

Note: Connect a mobile device USB cord after

starting the vehicle for optimum performance.

Navigation System

Entering a Destination

Destinations can be entered by Voice

Recognition, Address, Recent Destination,

Contacts and Places of Interest (POI).

To enter a destination using voice

recognition:

1. Press the

Push to Talk button.

2. Say “Destination address” to enter

specic destination information.

3. Say the address or other destination

information.

To enter a destination using the single line

destination feature:

1. Touch Navigation on the home page.

2. Touch Destination.

3. To enter a specic address, type the

address, intersection or road.

4. Touch Go.

5. Select the desired name from the

generated list.

6. Touch Go.

See your Infotainment System Owner Manual.

Refer to your Owner Manual for important safety information about using the navigation system

while driving.

Touch the Navigation icon on the home page to access the navigation functions.

OnStar® with 4G LTE and Wi-Fi®

If equipped with OnStar 4G LTE and Wi-Fi, up to seven devices (smartphones, tablets

and laptops) can be connected to high-speed Internet through the vehicle’s built-in Wi-Fi

hotspot.

To retrieve the SSID and password for the hotspot, press the OnStar Voice Command

button on the overhead console or rearview mirror, wait for the prompt, and then say

“Wi-Fi settings.” The information will be displayed on the screen.

For assistance, press the blue OnStar button or call 1-888-4-ONSTAR (1-888-466-7827).

Note: See onstar.com for a detailed instruction guide, vehicle availability, details, and system

limitations.

See your Infotainment System Owner Manual.

Optional equipment

Vehicle Personalization

Cruise Control

Use the MENU knob or the touch

screen to:

1. Select Settings on the home page.

2. Select Vehicle.

3. Select the desired menu item.

4. Select the desired feature and setting.

Settings are saved automatically.

5. Select BACK to exit each menu.

See Instruments and Controls in your Owner Manual.

Some vehicle features can be customized using the audio controls and menus or the

touch screen button.

Changing Vehicle Settings

The Vehicle Settings menu may include Climate and Air Quality, Collision/Detection

Systems, Comfort and Convenience, Lighting, Power Door Locks, and Remote Lock/

Unlock/Start.

Setting Cruise Control

1. Press the On/Off button. The

Cruise Control symbol will illuminate in

white on the instrument cluster.

2. When traveling at the desired speed,

press the SET– button to set the speed.

The symbol will illuminate in green

on the instrument cluster.

Adjusting Cruise Control

RES+ Resume/Accelerate

Press to resume a set speed.

When the system is active, press once to

increase speed 1 mph; press and hold to

continue increasing the speed.

SET– Set/Coast

When the system is active, press once to

decrease speed 1 mph; press and hold to

continue decreasing the speed.

Cancel

Press to cancel the cruise control without

erasing the set speed from memory.

Pressing the brake pedal also will cancel

the cruise control.

The cruise control set speed is erased

when cruise control or the vehicle ignition

is turned off.

See Driving and Operating in your Owner Manual.

Driver Assistance Systems

The driver assistance systems use advanced technologies to help avoid collisions by

providing visual and audible alerts under some imminent collision conditions.

Forward Collision Alert

– The

Vehicle Ahead indi-

cator will illuminate in green on the instrument cluster

when a vehicle is detected and will illuminate in amber

when following a vehicle ahead too closely. If your vehicle

approaches another vehicle too rapidly, the will ash,

a visual alert will ash on the windshield and the Safety

Alert Seat will pulse. See Safety Alert Seat.

Press the

Collision Alert button on the left side of

the steering wheel to set the alert sensitivity to Far, Medium, Near, or Off.

Lane Keep Assist with Lane Departure Warning

(LD Models Only) – The Lane Keep

Assist indicator is green on the instrument cluster when a lane marking is detected. The

system may assist by gently turning the steering wheel and display an amber if the

vehicle approaches a detected lane marking without using a turn signal in that direction.

It may also provide a Lane Departure Warning alert by ashing an amber and pulsing

the left or right side of the Safety Alert Seat

as the lane marking is crossed. See Safety

Alert Seat.

Press the Lane Keep Assist button on the center of the instrument panel to turn

the system on or off.

Lane Departure Warning

(HD Models Only)

– When crossing a detected lane marking

without using a turn signal, the system ashes an amber visual alert on the instrument

cluster and pulses the left or right side of the Safety Alert Seat

. See Safety Alert Seat.

Press the Lane Departure Warning button on the center of the instrument panel to

turn the system on or off.

Safety Alert Seat

– The driver’s seat pulses, left side, right side, or simultaneously, to

alert the driver of potential hazards.

Audible notication may be selected instead of Safety Alert Seat pulsing notication.

To change the alert setting, go to Settings > Vehicle > Collision/Detection > Alert Type.

Rear Vision Camera – Provides a view directly behind the vehicle when backing up.

To turn the Rear Vision Camera Guidelines or Rear Park Assist Symbols on or off, go to

Settings > Rear Camera.

Front and/or Rear Parking Assist – During low-speed

parking maneuvers, the system provides “distance to

closest object” information in the Driver Information

Center and a caution symbol on the Rear Vision Camera

display. When the vehicle should be stopped immediately

to avoid a collision, a continuous audible tone sounds or

the Safety Alert Seat pulses. See Safety Alert Seat.

To turn the system on or off, press the Parking Assist button on the center of the

instrument panel.

See Driving and Operating in your Owner Manual.

Optional equipment

Automatic Transmission

Integrated Trailer Brake Control (ITBC)

Range Selection Mode

Range Selection Mode allows the driver to select the range of gears desired for the cur-

rent driving conditions.

The ITBC system can be used to adjust the amount of power output, or Trailer Gain,

available to the trailer brakes. The control panel is located on the left side of the instru-

ment panel. ITBC information is displayed on the Driver Information Center.

1. Move the shift lever to the Manual (M)

position.

2. Press the + (plus) or – (minus) button on

the shift lever to select a lower or higher

gear. An M and the current gear will be

displayed on the Driver Information Center.

The transmission will be limited to the gear

selected and lower gears. If vehicle speed is

too high or too low for the requested gear, the

shift will not occur.

Tow/Haul Mode

The Tow/Haul Mode adjusts the transmission shifts to reduce shift cycling, such as when

towing or hauling heavy loads or driving on steep grades. When towing, use the Tow/

Haul Mode to prevent damage to the engine or transmission.

Press the

Tow/Haul Mode button on the end of the shift lever to turn the system

on or off.

GMC Trailering Guide App

The free trailering guide app includes maximum trailer weight ratings by model along

with trailering information on hitches and equipment, GMC trailering technologies, safe

trailering techniques and more. Currently available for the iPad

, download the mobile

app from the iPad’s app store.

See Driving and Operating in your Owner Manual.

Adjust the Trailer Gain by pressing the +/–

adjustment buttons on the control panel.

Squeeze the levers together on the control

panel (left lever does not move) to manually

apply the trailer brakes.

See Driving and Operating in your Owner Manual.

Optional equipment

Tire Pressure Monitor (Single Rear Wheel Models Only)

Hill Descent Control sets and maintains vehicle speed from 2–14 mph while descending a

steep incline in a forward or reverse gear.

1. Press the

Hill Descent Control button on the center of the instrument panel.

Vehicle speed must be below 31 mph to enable the system. The Hill Descent Control

symbol will illuminate on the instrument cluster.

2. Increase or decrease speed by applying the accelerator or brake pedal or use the Cruise

Control +/– buttons on the steering wheel. The adjusted speed becomes the new set

speed. The

symbol ashes when the system is actively applying the brakes to main-

tain vehicle speed.

See Driving and Operating in your Owner Manual.

Hill Descent Control

(Z71)

The traction control system limits wheelspin and the StabiliTrak

stability control system

assists with directional control of the vehicle in difcult driving conditions. Both systems

turn on automatically every time the vehicle is started.

Turning Off Traction Control

Turn off traction control if the vehicle is stuck

and rocking the vehicle is required.

Press the

Traction Control/StabiliTrak Off

button on the center of the instrument panel

to turn traction control off or back on. The

Traction Control Off light will illuminate on

the instrument cluster when the system is off.

Traction Control and StabiliTrak Systems

The

Low Tire Pressure warning light on the instrument cluster illuminates when one

or more of the vehicle’s tires is signicantly underinated. Fill the tires to the proper tire

pressures. The proper tire pressures for the vehicle are listed on the Tire and Loading

Information label, located below the driver’s door latch. Current tire pressures can be

viewed in the Driver Information Center.

Tire pressure is affected by cold weather and distance driven. If the low tire pressure

warning light illuminates when the vehicle is rst started in cooler temperatures and

then turns off as the vehicle is driven, check for the proper tire pressures.

Refer to your Owner Manual for additional information about normal monthly tire maintenance.

See Vehicle Care in your Owner Manual.

See Driving and Operating in your Owner Manual.

Optional equipment

Sunroof Controls

The sunroof controls are located on the

overhead console.

Power Rear Window

Sunroof

SLIDE TILT

Express Open/

SLIDE TILT

Fully press the rear of the SLIDE switch to

express open the sunroof. Gently press

and hold the switch to partially open the

sunroof.

Fully press the front of the SLIDE switch

to express close the sunroof. Gently press

and hold the switch to partially close the

sunroof.

SLIDE TILT

Vent/

SLIDE TILT

Press the rear of the TILT switch to vent

the sunroof from the closed position.

Press the front of the TILT switch to close

the sunroof.

See Keys, Doors and Windows in your Owner Manual.

The power rear window switch is located

on the overhead console.

Press the

switch to open the

rear window.

Pull the

switch to close the

rear window.

Note: The power rear window cannot be

operated manually.

See Keys, Doors and Windows in your Owner Manual.

Diesel Exhaust Brake (Diesel Models Only)

The engine exhaust brake enhances the vehicle brake system by automatically downshift-

ing the transmission, depending on the length of time the brakes are applied.

Press the

Diesel Exhaust Brake button on the center of the instrument panel to

turn the system on or off.

See your Duramax Diesel Owner Manual.

Sunshade

Open and close the sunshade manually by

pulling it rearward or forward.

Optional equipment

The myGMC mobile app connects owners to a variety of vehicle

info rmation and services, such as a searchable Owner Manual, real-time

fuel information and Roadside Assistance.

Download the OnStar RemoteLink mobile app and enjoy select features

for ve years from date of vehicle delivery. With a compatible mobile

device, OnStar subscribers can access many services, including remotely starting/stop-

ping the vehicle, locking/unlocking doors, and locating the vehicle on a map (on properly

equipped vehicles). To learn more about OnStar services, press the blue OnStar button,

call 1-888-4ONSTAR (1-888-466-7827), visit onstar.com or refer to your owner manual.

Download the mobile apps from your compatible mobile device’s app store.

23133498 A

!23133498=A!

Roadside Assistance

1-800-GMC-8782 TTY Users: 1-888-889-2438

(1-800-462-8782)

As the owner of a new GMC, you are automatically enrolled in the GMC Roadside

Assistance program for up to 5 years/60,000 miles, whichever occurs rst, at no expense

to you. GMC’s Roadside Assistance toll-free number is staffed by a team of trained advi-

sors who are available 24 hours a day, 365 days a year, to contact a service provider for

light services (fuel delivery, jump-starts, at tire and lock-outs) or make arrangements to

tow your vehicle to the nearest GMC dealer for any repairs.

Roadside Assistance and OnStar

If you require roadside service and have a current OnStar subscription, press the OnStar

button and the vehicle will send your current GPS location to an OnStar Advisor who will

speak to you, assess your problem, contact Roadside Assistance and relay your exact loca-

tion so you will get the help you need.

GMC Owner Center

Get to know your vehicle inside and out with the GMC Owner Center. Check out personal-

ized information, including an online owner manual and helpful how-to videos, track your

service history and warranty status, review your current OnStar Vehicle Diagnostics report

(active OnStar account required) and more. Create an account today at my.gmc.com.

Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner Manual

for complete instructions. All information contained herein is based on the latest information available at the

We recommend always using ACDelco or genuine GM service parts.

myGMC and OnStar Mobile Apps

GMC 2016 Sierra 1500 User guide

Brand: GMC

Model: 2016 Sierra 1500

Category: Cars

Type: User guide

This manual is also suitable for

Sierra 1500 2016

Download PDF

report

GMC 2016 Sierra 1500 User guide

This manual is also suitable for

GMC 2016 Sierra 1500 User guide

Related papers

Other documents