Sanyo RP-X3A User manual

Brand: Sanyo

Model: RP-X3A

Category: Radio receivers

Type: User manual

Sanyo RP-X3A is an AM/FM stereo pocket radio with in-ear phones. It's powered by a single AAA battery and has a belt clip and an armband for easy carrying and use.

The radio features a built-in AM antenna and a fully uncoilable cord on the earphones for the best FM reception. It also has a bass boost function and a volume control knob.

The RP-X3A is a great choice for people who want to listen to the radio on the go. It's compact and lightweight, and it has a long battery life. The sound quality is good, and the bass boost function adds some extra depth to the music. The armband and belt clip make it easy to carry and use, and the in-ear earphones provide a comfortable and secure fit.

Sanyo RP-X3A is an AM/FM stereo pocket radio with in-ear phones. It's powered by a single AAA battery and has a belt clip and an armband for easy carrying and use.

The radio features a built-in AM antenna and a fully uncoilable cord on the earphones for the best FM reception. It also has a bass boost function and a volume control knob.

RP-X3A/AU

Instruction Manual

AM/FM-Stereo Pocket Radio

with In-Ear Phones

ENGLISH

INSTALLING A BATTERY

One AAA battery (not supplied)

Cautions:

•

Match the polarity symbols

(+ and -) marked inside the

battery compartment.

•

Always use a fresh battery of

the required size.

If the unit is not to be used for a prolonged period, remove

the batteries to avoid leakage. In the interest of

environmental safety, dispose of batteries safely.

USING THE RADIO

POWER ON/OFF

– switch to

BASS ON/OFF

-switch to

the power

OFF

the BASS

OFF

VOLUME – rotate to

- for con- adjust the volume.

necting the

(see “Listening Safety”)

supplied

earphones TUNING- rotate

to select your

favorite station.

AM/FM/FM ST-switch

to the desired AM or

FM ST

band.

Hand Strap

(not supplied)-

- pass the narrow end of the strap

through the strap lug and pass the

other end through the loop.

Belt Clip (on the back of the radio) –

To remove the clip, press down in the

slot under the clip and slide it in the

opposite direction.

ENGLISH

Using the Arm Strap

When you are listening to the radio, you can fix the radio on the arm

strap( supplied). Simply put the radio into the hand strap, then wear on

the arm as below illustration.

To improve the reception:

•

For the best FM reception, fully

uncoil the earphones’ cord.

•

The AM antenna is built-in.

Move the radio to improve

AM reception.

CAUTION

High volume levels can create potentially dangerous situations by

drowning out surrounding sounds. Use cautiously when bicycling or

jogging while operating the unit, and obey all applicable laws.

Do not play your earphones at a high volume. Hearing experts advise

against continuous extended play. If you experience a ringing in your

ears, reduce volume or discontinue use.

SPECIFICATION

Frequency Range AM : 525-1610 kHz

FM : 87.5-108 MHz

Intermediate Frequency AM: 465 kHz (XE, UK)

AM: 455 kHz (Others)

FM : 10.7 MHz

Power Source 1 AAA Battery

Dimensions 83 x 43 x 22 mm

Weight (without battery and earphone) 43 g

Output Power (maximum) 5 mW

Headphone Impedance 32 Ohm

Included Accessories Stereo Earphones

Detachable Belt Clip

Armband

SANYO Electric Co., Ltd. Osaka, Japan

Sanyo RP-X3A User manual

Brand: Sanyo

Model: RP-X3A

Category: Radio receivers

Type: User manual

Sanyo RP-X3A is an AM/FM stereo pocket radio with in-ear phones. It's powered by a single AAA battery and has a belt clip and an armband for easy carrying and use.

The radio features a built-in AM antenna and a fully uncoilable cord on the earphones for the best FM reception. It also has a bass boost function and a volume control knob.

Download PDF

report

Sanyo RP-X3A User manual

Sanyo RP-X3A User manual

Related papers

Other documents