Admiral Craft BC-65 Owner's manual

Brand: Admiral Craft

Model: BC-65

Type: Owner's manual

Admiral Craft BC-65 is a horizontal bottle cooler designed for indoor use, perfect for storing and chilling beverages. It features adjustable temperature controls, allowing you to set the ideal temperature for your drinks. The unit has a spacious interior with bin dividers, providing ample storage for various bottle sizes. The Admiral Craft BC-65 is equipped with a self-contained refrigeration system, ensuring efficient cooling performance. Its compact size makes it a great choice for smaller spaces, such as home bars, offices, or dorm rooms.



COMMERCIAL REFRIGERATOR AND FREEZER

OWNER’S MANUAL



Horizontal Bottle Coolers

Models: BC-50, BC-65

This manual contains important information regarding

your ADMIRAL CRAFT unit. Please read the manual

thoroughly prior to equipment set-up, operation and

maintenance.

Failure to comply with regular maintenance guidelines

outlined in this manual may void the warranty.

MUST READ!!!



INSTALLATION

1. Do not use for a minimum of 24 hours before installing if the unit has been transported.

2. Ensure unit is at the appropriate temperature prior loading it with product.

3. Make sure that the unit has proper ventilation in its location.

4. Review manual in its entirety. Misuse of this unit will void the warranty.

LOCATION

1. Install the unit on a flat sturdy surface to avoid unit malfunction

2. Install the unit in an indoor, well ventilated area

3. Maintain a clearance of at least 6” from all sides of the unit

4. Do not install in a high humidity or dusty area as this will cause the unit to

malfunction

5. Select a location away from heat and moisture generating equipment as

malfunction due to high ambient temperature will void warranty

ELECTRICAL

Ensure that the required voltage of the compressor is constant all of the time. Voltages that are

either too low or too high will cause the unit to malfunction thereby voiding the warranty.

Unit must be plugged into a properly sized grounded electrical outlet with over-current

protection. Make sure that the unit has its own dedicated outlet. Do not use an extension cord.

TEMPERATURE CONTROLS

This unit’s temperature control is factory set to an average temperature of 38 F. To change the

temperature, adjust the control inside the unit. To decrease the temperature and make the

temperature cooler, turn the knob clockwise. To increase the temperature and make the unit

warmer, turn the knob counter-clockwise.

LOADING PRODUCT

DO NOT LOAD PRODUCT ABOVE THE TOP CROSS BAR OF THE BIN DIVIDERS OR

ABOVE THE LOAD LIMIT STICKERS. LOADING PRODUCT ABOVE THE LOAD LIMIT

STICKERS WILL HARM THE PERFORMANCE OF THE UNIT AND WILL VOID THE

WARRANTY.

WARNINGS

1. For your safety, do not to overload the outlet.

2. Each unit should be on a dedicated circuit.

3. Make sure that the unit is properly grounded.

4. Do not attempt to alter or tamper with the electrical cord.

5. Never use extension cords.

6. Do not use unit outdoors

7. High ambient temperatures will cause the compressor to overcompensate, the will

eventually cause the unit to break

8. If you will not be using the unit for an extended period of time, unplug the unit from the

outlet. You may leave the door open slightly to avoid moisture

9. If you must unplug the unit, wait at least 10 minutes before plugging it back in. Failure to

wait the appropriate amount of time will cause damage to the compressor.

10. Never handle the cord with wet hands.

11. Prior to any maintenance or cleaning of the unit, you must unplug it.

12. Never attempt to remove or repair any component.

13. Make sure the cord is away from the unit and nothing is resting on it.

14. Keep all flammable items away from the unit.

15. Setting the temperature control to the coldest setting will cause the evaporator coil to

freeze up and eventually result in a warm cabinet temperature

16. Proper maintenance includes cleaning the condenser at least once a month. Neglect of

maintenance will void the warranty.

17. Do not set the desired temperature out of the recommended temperature range:

(REFRIGERATOR: 32 F – 55 F) (FREEZER: -15 F – 20 F)

CLEANING THE INTERIOR OF THE UNIT

To clean the interior, use a mixture of mild soap and warm water. Do not use steel wool, harsh

soap, abrasive cleaners, or bleach as this may cause damage to the surface.

Gaskets should be cleaned on a weekly basis. To do this, remove the door gasket from the f

door frame, soak it in a mixture of mild soap and warm water for about 30 minutes and dry

gently with a soft cloth. When you replace the gaskets on the door make sure they form a

proper seal.

When necessary, clean the bin dividers with a mild soap and water mixture. If any liquid

accumulates on the inside of the unit, remove immediately. Harsh cleaners are not

recommended as they may cause corrosion and deteriorate the life of the unit.

CLEANING THE CONDENSOR COIL

The condenser surface must be kept free of dust, dirt, and small debris at all times. Regular

maintenance includes cleaning the condenser coil at least once a month. To clean, use a

condenser coil cleaner and brush the condenser fins in the direction of top to bottom. After you

finish cleaning, straighten any fins that may have bent during cleaning with a fin comb.

CLEANING THE FAN BLADES AND MOTOR

If there is buildup, clean the fan blades and motor with a soft cloth. If you need to wash the fan

blades, be sure to cover the fan motor first to prevent moisture.

TROUBLESHOOTING

SYMPTOM

ACTION

Compressor not running Check the circuit breaker to make sure no fuses are blown

Check that power cord is plugged in

Make sure thermostat is not set too high

Make sure cabinet is not in defrost cycle

Condenser runs for long

periods of time

Ensure doors are closed.

Make sure gaskets are installed correctly and are clean.

Make sure condenser coil is clean

Make sure evaporator coil is not iced over

Make sure that the thermostat is not set to cold.

Make sure that the door gasket is creating a proper seal.

Cabinet temperature is too

warm

Make sure thermostat is not set too warm

Make sure air flow is not blocked.

Make sure there is at least four inches of clearance from

evaporator

Check circuit breaker to make sure fuse isn’t blown

Make sure the condenser coil is clean

Ensure doors are closed.

Make sure evaporator coil is not iced over

Make sure that the door gasket is creating a proper seal.

Cabinet is noisy Look to make sure there are no loose parts

Make sure tubing isn’t vibrating

Ensure unit is installed on a flat surface

NOTES:

RETAIN THIS MANUAL FOR FUTURE REFERENCE

Please read the entire manual carefully before installing and operating. If certain

recommended procedures are not followed, warranty claims will be denied.

Notice: Admiral Craft reserves the right to make changes in design and

specifications without prior notice.

MODEL #: _____________________________________

SERIAL #: _____________________________________

CABINET SERIAL #: _____________________________________

PURCHASE DATE: _____________________________

Admiral Craft BC-65 Owner's manual

Admiral Craft BC-65 Owner's manual

Admiral Craft BC-65 Owner's manual

Related papers

Other documents