Belknap Hill Trading Post 163392 Operating instructions

Brand
Belknap Hill Trading Post
Model
163392
Type
Operating instructions

Belknap Hill Trading Post 163392 is a folding sawhorse designed to provide a stable and portable work surface for cutting and sawing tasks. It consists of four sawhorse legs, two stretchers, a top, bolts, washers, and nuts. The sawhorse can be easily assembled using a Phillips screwdriver or drill, safety glasses, work gloves, and a wrench for 3/8" nuts. Once assembled, the sawhorse can be used to support various materials, including wood, metal, and plastic. Its foldable design allows for easy storage and transportation, making it ideal for both indoor and outdoor use.

Belknap Hill Trading Post 163392 is a folding sawhorse designed to provide a stable and portable work surface for cutting and sawing tasks. It consists of four sawhorse legs, two stretchers, a top, bolts, washers, and nuts. The sawhorse can be easily assembled using a Phillips screwdriver or drill, safety glasses, work gloves, and a wrench for 3/8" nuts. Once assembled, the sawhorse can be used to support various materials, including wood, metal, and plastic. Its foldable design allows for easy storage and transportation, making it ideal for both indoor and outdoor use.

Step 1
Step 2
Step 3
Tools and items needed
• Phillips screwdriver/drill
• Work gloves
• Safety glasses
• Wrench for 3/8" nut
fig. 1
fig. 2
fig. 3
SawHorseFig1.ai
A
B
C
A
E
SawHorseFig2.ai
B
D
F
F
SawHorseFig3.ai
G
G
Nest the sawhorse legs that are 30" wide within the legs that are 33" wide so that
the rounded sides are facing each other. Line up the holes in the sawhorse legs and
secure with the bolt, washer and nut (fig. 3).
G
Place the 1x4-33" stretcher into the middle notches of two sawhorse legs
and attach using two 2" screws on each leg. Make sure the ends of 1x4 line up
with the sides of each leg. Repeat with the two remaining sawhorse legs and
the 1x4-30" stretcher (fig. 1).
B
C
E
A
A
Attach the 2x3 top to the top notches of the leg set that uses the 1x4-33"
stretcher . Line up the ends of the 2x3 with the top sides of the top leg notches
and insert two 2 ½" screws on each side (fig. 2).
D
B
F
Contents
• A. 4 - Sawhorse legs
• B. 1 - 1x4 - 33" Stretcher
• C. 1 - 1x4 - 30" Stretcher
• D. 1 - 2x3 - 33" Top
• E. 8 - 2" Screws
• F. 4 - 2 ½" Screws
• G. 2 - Bolts, washers and nuts
FOLDING SAWHORSE
ASSEMBLY INSTRUCTIONS
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR USE OF THE
PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE CONSTRUCTION OR USE OF THIS
PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING
THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR
IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2014 Universal Forest Products, Inc. All rights reserved.
UFP New Waverly, LLC
P.O. Box 1730 | New Waverly, TX 77358 | 936.295.3411
7340 9/14
www.BelknapHill.com
Coloque la parte superior 2x3 para los mejores muescas del juego de patas que
utiliza el 1x4-33" camilla. Alinee los extremos de la 2x3 con los lados superiores
de las ranuras principales de la pierna e inserte dos tornillos de 2 ½" en cada
lado (figura 2).
Paso 1
Paso 2
Paso 3
Herramientas y artículos necesarios
• Destornillador o taladro Phillips
• Guantes de trabajo
• Lentes de seguridad
• Llave para tuerca de 3/8”
fig. 1
fig. 2
fig. 3
SawHorseFig1.ai
A
B
C
A
E
SawHorseFig2.ai
B
D
F
F
SawHorseFig3.ai
G
G
Anide las patas de caballete que tienen 30” de ancho dentro de las patas que
tienen 33” de ancho, de modo que los lados redondeados estén enfrentados.
Alinee los agujeros en las patas del caballete y asegúrelos con el perno, arandela
y tuerca (figura 3).
Coloque el bastidor de 1x4-33" en las muescas intermedias de dos patas de
caballete y sujete usando dos tornillos de 2" en cada pata. Asegúrese de que
los extremos del 1x4 queden alineados con los lados de cada pata. Repita con las
dos patas de caballete restantes y el bastidor de 1x4-30" (figura 1).
B
C
E
A
A
Contenido
• A. 4 - Patas de caballete
• B. 1 - Bastidor de 1x4 - 33”
• C. 1 - Bastidor de 1x4 - 30”
• D. 1 - Cubierta de 2x3 - 33”
• E. 8 - Tornillos de 2”
• F. 4 - Tornillos de 2 ½”
• G. 2 - Pernos, arandelas y tuercas
CABALLETE PLEGABLE
INSTRUCCIONES DE ARMADO
LOS DIAGRAMAS E INSTRUCCIONES DE ESTE FOLLETO SON PARA FINES ILUSTRATIVOS SOLAMENTE Y NO ESTÁN DESTINADOS A REEMPLAZAR A UN PROFESIONAL CERTIFICADO. CUALQUIER
CONSTRUCCIÓN O USO DEL PRODUCTO DEBEN ESTAR DE ACUERDO CON TODOS LOS CÓDIGOS LOCALES DE CONSTRUCCIÓN O DE ZONIFICACIÓN. EL USUARIO ASUME TODOS LOS RIESGOS Y
RESPONSABILIDADES ASOCIADOS CON LA CONSTRUCCIÓN O EL USO DE ESTE PRODUCTO. EL USUARIO O CONTRATISTA DEBEN TOMAR TODAS LAS MEDIDAS NECESARIAS PARA GARANTIZAR LA
SEGURIDAD DE TODAS LAS PERSONAS INVOLUCRADAS EN EL PROYECTO, INCLUYENDO, ENTRE OTRAS, EL USO DEL EQUIPO DE SEGURIDAD APROPIADO. A EXCEPCIÓN DE LO CONTENIDO EN LA
GARANTÍA LIMITADA POR ESCRITO, EL GARANTE NO PROPORCIONA NINGUNA OTRA GARANTÍA, YA SEA EXPRESA O IMPLÍCITA, Y NO SERÁ RESPONSABLE DE NINGÚN DAÑO, INCLUIDOS DAÑOS
CONSECUENTES.
©2014 Universal Forest Products, Inc. Todos los derechos reservados.
UFP New Waverly, LLC
P.O. Box 1730 | New Waverly, TX 77358 | 936.295.3411
7340 9/14
www.BelknapHill.com
D
B
F
G
  • Page 1 1
  • Page 2 2

Belknap Hill Trading Post 163392 Operating instructions

Brand
Belknap Hill Trading Post
Model
163392
Type
Operating instructions

Belknap Hill Trading Post 163392 is a folding sawhorse designed to provide a stable and portable work surface for cutting and sawing tasks. It consists of four sawhorse legs, two stretchers, a top, bolts, washers, and nuts. The sawhorse can be easily assembled using a Phillips screwdriver or drill, safety glasses, work gloves, and a wrench for 3/8" nuts. Once assembled, the sawhorse can be used to support various materials, including wood, metal, and plastic. Its foldable design allows for easy storage and transportation, making it ideal for both indoor and outdoor use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents