Construction Metals PIV614 Installation guide

Brand: Construction Metals

Model: PIV614

Type: Installation guide

CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures

are in place. When working with power tools, gloves and eye protection are absolutely required.

The Plastic Floral Grille Insert sits behind the screen of the vent. In most cases the installation of the vent will hold the

Plastic Floral Grille Insert in place. If the fit seems loose or at risk of separation a few dabs of adhesive caulk will secure

the insert.

Note: The Plastic Floral Grille Insert is a decorative enhancement to an existing vent, it is not a vent itself.

INSTALLATION GUIDELINES

PIV614

PLASTIC FLORAL GRILLE INSERT

13 ½ in.

34.29 cm

5 in.

12.7 cm

These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional,

and to check with your local building inspector or building permit office for approvals and possible variations that may apply.

This photo shows the back side of a Plastic Floral Grille Insert inside a 14 in. x 6 in. vent. The plastic

strap is for transporting the TWPIV and would be removed just prior to installation.

Construction Metals PIV614 Installation guide

Construction Metals PIV614 Installation guide

Construction Metals PIV614 Installation guide

Other documents